What is the best way to share Address book between 5 Macs that are networked?

We have 5 Macs in the office, using 10.6.x or higher, and linked by a network. One Mac has the company database, and needs to be viewed and updated by the other users. What is the simplest way of doing this?

Oh, I meant Leopard does do more than Tiger Server.
I don't know enough about Server, even less abut Syncing.
SL is to new, not enough time to iron out the kinks yet imho.
One day SL will be better than Leo, but...
I'd ask over in server...
http://discussions.apple.com/category.jspa?categoryID=96
Or perhaps Collaboration Services...
http://discussions.apple.com/forum.jspa?forumID=1352
They may even have a different opinion on SL.

Similar Messages

  • What is the best way to sync Address Book contacts?

    Please help!
    I run a small Mac network and I need to sync all (we have 8 Macs) the Mac's Address Book's with each other and also with 5 different iPhones. We have a Mac Server running Tiger and all the Macs are running Tiger. 4 of the Macs are Intel. The server is PowerPC.
    At the moment I am just using 1 .Mac account to sync to them all, but this is causing many problems with duplications, errors and 'stress!'
    The reason for the above setup is money. But, as the problems continue and the syncing become more important, money is now allowed to be spent.
    My question really is, as the subject header says, 'What is the best way to sync Address Book contacts?' In the past I have tried XC Connect, and a few other apps, but with the introduction of the iPhones, the setup has become more complex.
    If I were to buy all new Intel Macs and an Intel Mac Server all running Snow Leopard, would the 'Address Book Server' do the job? I have found very little information on the net and the information I did find was all negative.
    Is there something Leopard can do that Tiger can't? Is Tiger nolonger a good enough system to try and run an Address Book network?
    Does anybody else out there in the Mac world have a similar setup to mine, and if so, how do you have your setup.
    Incidentally, ALL users, incuding iPhone users, need read & write access to the Address Book!!
    Any solutions or suggestions would be most welcome.
    Thanks in advance
    col_t

    Oh, I meant Leopard does do more than Tiger Server.
    I don't know enough about Server, even less abut Syncing.
    SL is to new, not enough time to iron out the kinks yet imho.
    One day SL will be better than Leo, but...
    I'd ask over in server...
    http://discussions.apple.com/category.jspa?categoryID=96
    Or perhaps Collaboration Services...
    http://discussions.apple.com/forum.jspa?forumID=1352
    They may even have a different opinion on SL.

  • What is the best way to backup Address Book to external HD?

    Hello there
    I would like to backup my Address Book on an external HD. How do I go about doing and what's the best way to doing it?
    I have a vague idea but not sure if it's the correct folder to drag to the external HD. I went to ~/Library/Application Support/Address Book. My question is this: Is that Address Book folder the correct one to drag to the external HD? Am I missing other important folders to drag along to the external HD in order for both the Address Book folders to be the same in my internal and external HD?
    Thanks in advance!!

    It would copy the information into a single file... The same as if you wanted to share your contacts with someone else-you could email the vCard to them, they would import it and have the all the same contact information imported into their address book.
    For your own use, it's pretty much the same and works through the File>Import>vCards option in AddressBook.

  • What's the best way to share JE environments between servlets?

    Hi, I'm happily serving requests for the same webapp (so single servlet) which uses multiple JE environments. In my case I have an environment for each db, one of these environments is a login details only db. Things work great, three questions though:
    1. Right now I'm keeping environment/entity store references in global vars (everything below entity store, views etc. is created and discarded for each request), is there a better way?
    2. When I want to add a new app (so additional servlet) - how can I make sure the login environment is shared across servlets, to take advantage of shared cache etc?
    3. As indexes are thread safe, is it considered best practice to store index refs. in global vars. and have each incoming thread (in a servlet) share these vars. or should each request build the object refs. it uses and discard accordingly?
    Hoping the above makes sense.
    PhilQ.

    Yes, EntityIndex objects are also thread-safe. Really only EntityCursor objects are not.
    The entity objects themselves are not owned by JE. You will have problems if you have multiple threads changing them concurrently (if one thread is changing an entity object's properties and another thread is storing it, for example). However, it is up to you if you want to share entity objects between threads; there is nothing wrong with that, since there is no interaction with JE. But your app will need to enforce thread safety, perhaps by using them only in a read-only fashion, for example.
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • What's the best way to share a project between FCP Pro & FCP Express?

    I started a project on FCP and wanted to continue the project at ome on FCP Express. I troed to open the project but I got "-error 41"
    Any suggestions would be great!

    Hi(Bonjour)!
    FCP can open FCE's projects, but FCE cannot open FCP's one.
    Michel Boissonneault

  • What is the best way to share a iTunes library between 5 users on the same computer?

    What is the best way to share a iTunes library between 5 users on the same computer?
    Currently I have a common itunes library in a shared folder that each user is linked to.  The problem is that when one user adds music to the shared file, it does not automaticaly appear to other users when they open their iTunes.  They have to go to the shared library and select the new music in order to make it visable in their iTunes.
    Would iTunes file shareing fix this problem?
    Thanks

    aapl.up wrote:
    Rick, are you saying that if you try to share a folder outside of home and use sharepoints, then the other mac wont prompt you to log in? Have you tried that? It is hard to believe that is the case
    I am sort of saying that. Have you tried it? I know it's hard to believe, but you really need to help us out by trying some steps that you don't believe.
    We can't see what your exact situation is. We sort of know what's worked for us out here. Just trying to help you get this going in less than 24 hours!
    Sharepoints manages the samba configuration file. It's free software that puts a pretty face on an otherwise cumbersome config file.
    Give it a shot.
    windows will not prompt for passwords, I have tried this with multiple computer at home for both vista and xp
    As I stated. You will not get prompted on windows, if you have set up sharing in an insecure fashion. You are not using a secured sharing situation.
    No argument with your statement.

  • HT3819 what is the best way to share music from my home computers with sonos?

    I have 2 iMacs and a Macbook Pro, all with different music in iTunes. What is the best way to share all the music with Sonos? Home sharing or Music sharing?

    http://www.networkworld.com/reviews/2009/080709-review-5-usb-turntables-convert. html
    http://vinyl-converter-turntable-review.toptenreviews.com/
    I've always been partial to Numark and Audio-Technica. Have several DJ friends and a client who runs a DJ business, and they use Audio-Technica stuff almost exclusively.
    You may be surprised at how easy it is...
    With the exception of cameras (webcams especially) Macs are pretty much "Plug &Play" with anything USB, and even though I've never used one, reviews say you just plug the turntable in and it reads as a drive.

  • What is the best way to share the High Res images ...

    What is the best way to share the High Res images on my Nokia Lumia 1020?  My Android friends really want to see the original ~12MB images taken with Nokia Pro Camera?
    -Paul
    Solved!
    Go to Solution.

    if you have the att device, then use your att locker.
    ANYONE can sign up for the att locker here:
    https://locker.att.net/app/#welcome
    even if you do not have ATT service, you should sign up NOW.
    There is an application that is pre-installed to allow for the 1020 to upload the full resolution files to the AT&T locker.
    AND, because they are launching the 1020, they are giving a free upgrade to the account to the 50GB box instead of the 5GB.
    they are doing this for a limited time only, I have created a couple of accounts.
    after you create your account, it will have to be verified. after you check your email and verify the box, log back in and you will see it is only a 5gb account.
    click on "my Account/upgrade" and choose the 50GB and you should see it say FREE under the cost.
    then you can upload the full res pictures and share them that way.
    otherwise, if you are within reach, try Bluetooth transfer.

  • What's the best way to share photos?

    Now that MobileMe Gallery is gone, what's the best way to share photos over the internet?
    Is there some simple method where I can upload an entire album from iPhoto and then send a link to others so they can view them?
    I've tried both Flickr and Shutterfly and did not like either.

    buttermaker wrote:
    Thanks for the idea, but it still seems kinda kludgy.
    I find it best to focus on solutions.
    Why can't iPhoto just pull the images from a media browser or something over the network?
    I don't know. Part of the issue has to be that iPhoto is not a HD browser. Another part is what you mean by " ... just pull the images".
    Any tips on creating a locally hosted web gallery?
    My greatest single tip of all time: try it! The tools available to use for just a few hundred dollars are astoundingly powerful.
    Or... does anyone have any Automator magic they'd like to share?
    No need. Web galleries are built into Aperture 3. Put the images you want to be in the gallery in one Album (Smart or otherwise). Select all the images. Click "New→Web Page". Select a theme. Change some of the text. Make some other changes. Click "Export Web Pages ... ". Make some more decisions. Give the folder a name. Save it somewhere with access to those whom you wish to see it. Select "Tell me when done". Check your email (have a coffee). Click "Show in Finder". Open the folder. Double-click the file "index.html". Brilliant! Enjoy.
    The trick to sharing this is to make the folder available. The index file will always open the web site pages in a web browser.

  • What is the best way to share for large projection?

    I would like embed my movie as part of the Powerpoint to be shown on a Windows machine (my only option). What is the best way to share it so that it doesn't look grainy or pixelated?

    Fool proof? Does Mircosoft make Powerpoint?
    LOL... but seriously
    You could export it out to a Windows Media file.
    http://www.Flip4Mac.com

  • What is the best way to share an entire iPhoto '09 folder with both Mac and PC Users?

    What is the best way to share an entire photo folder with lots of photos from iPhoto '09 with both Mac and PC Users?
    I got over a 100 photos in just 1 of my photo folders.
    I really don't want to have to email these photos individually...
    There's gotta be an easier way to share an entire photo folder...

    Awesome, thx for clarifying it
    I found this related Apple article:
    ..."If you’re used to right-clicking on a Windows computer, you can use Control-click in a similar way on your Mac."...
    http://support.apple.com/kb/PH4537

  • What is the best way to share over 1000 pictures on Apple TV?

    What is the best way to share over 1000 pictures on Apple TV?

    Creating Shared Photo Streams:
    Shared Photo Streams are permanent iCloud albums for storing photos and videos that can sync across all your iCloud-enabled devices. This is different from your "My Photo stream" that's basically a running tally only holding photos for about a month or 1,000. Shared streams follow different rules...
    In your photos app in an iPhone or ipad, at the bottom you'll see a "shared" icon.  Choose it and then create a new shared stream, you don't have to actually share it with anyone when it prompts you for a contact just click "Create".  Then choose the photos you want in there.  If your Apple TV is linked to your iCloud account you will be able to see those shared streams.
    See here http://support.apple.com/kb/HT5902.
    Apple states:
    How many photos and videos can be stored in a shared stream?
    A shared stream can hold a maximum of 5000 photos and videos combined. When you reach your limit, you must delete some photos or videos before adding new ones.
    How long are iCloud Photo Sharing photos and videos stored in iCloud?
    The photos and videos you share (and the comments or Likes associated with those photos) remain in iCloud until you or the contributor delete them manually, or until you delete the shared stream completely.

  • HT5225 what is the best way to share photos now?

    Now that the gallery is shut down and kodak gallery is shut down, what is the best way to share photos?

    See iCloud for PC's for instructions on setting it up.

  • [Solved] What is the best way to share pacman cache ?

    I'm wondering what is the best way to share the pacman cache .
    I went with the obvious choice 'sshfs' . But the cache on the server is owned by root so I can't use it dynamically unless I enable root logins , right ?
    Is it safe to enable root logins and mount with the root user ?
    What is the best and safest way to share pacman cache dynamically ?
    Last edited by Nezmer (2008-12-07 01:13:20)

    Interesting. I use sshfs and yes use root login to do business. But I see it this way you want more security created a stronger password. You want more security than that disable passwords and use keys. But once you start NFS you are surely introducing some security issue just as if you enable root ssh login, so why is NFS better?
    Just asking out of interest, I claim to know nothing about security.

  • What is the Best way to move large mailboxes between datacenters?

    What is the Best way to move large mailboxes between datacenters?

    Hi, 
     Are you asking with regards to on-premises Exchange? With Microsoft Online SaaS services (aka Exchange Online) there is no control and no need to control which data center a mailbox resides in.
     With regard to on-premises Exchange, you have two choices: you can move it over the WAN in which case you would either do a native mailbox move (assuming you have Exchange 2010 or later you can suspend the move after the copy so you can control the
    time of the cutover) or create a database copy in the second data center and once the database copies have synchronized change the active copy.
    The other choice is to move is out of band which would usually involve an offline seed of the database (you could conceivably move via PST file but that would disrupt access to the mailbox and is not really the 'best way').
    In general, Exchange on-premises questions are best asked on the Exchange forum: http://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    Thanks,
    Guy 

Maybe you are looking for

  • Creative Cloud "application"

    WINDOWS 7 (CC) A few issues. Desktop - Creative Cloud  (I guess this is generally called the "installer".) I noticed there was an update to 'Creative Cloud'  which I duly did . This then advised various updates including 'Premiere CS6 Family' Did thi

  • UDS 4.0 - PHD Connection - Server Threw an Exception

    Hi All,       I am using UDS 4.0 for connecting to Honeywell PHD System via OPC Server. When i execute the Tag Query first time, I am getting the Tag Values successfully. But the same query if i run it for second time i gives me an Exception "com.sap

  • HTML Tags in Popup Key LOV Item

    Hi, I would like to format the text shown in a PopupKey LOV (Displays description, returns key value) item using HTML tags. For example, I have an item with the following query in the LOV definition: select '<b>'||dname||'</b>' dept_name, deptno from

  • How to solve error lretcode=-1004

    Hi, I got the error when try to update Sales Order value.  The coding is lRetCode=oSalesOrder.Update.  However, some time it can update successfully but sometime it will return failure code -1004.  I cannot allocate where  the problem is. Did anyone

  • System problems after 10.4.5

    After attempting the update in the software updater (which I will never do again), it failed to update. I downoladed the delta updater and ran it no problems, rebooted, and now spotlight won't work. It comes up but no matter what I type in there are