What is the best way to update the remote server?

Hi,
Sorry, but this is a newbie question.
Is there a way to update your Flex app on the remote server without taking it down momentarily? Currently, if I update the app, I remove the files from the public_html folder on the server and then put the new files in their place. The site goes down while I'm making the change. Is there a better way of updating or is this the standard way?
Sorry for such a basic question.
Thanks,
-Laxmidi

If you are still using IOS 4
Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/d549b56e8567252791a 1834379e59068.jpg

Similar Messages

  • What's the best way to update my Mac with the latest version of Adobe Flash Player?

    I've been getting prompts whenever I look at certain websites to download the latest version of Adobe Flash Player.  I'm skeptical as to responding to those prompts.  What is the best way to update my Mac Pro with the latest version of Adobe Flash Player?

    You might also want to consider uninstalling Adobe Flash... I currently don't have it installed and haven't needed to install it.  Most websites are now coded in HTML 5 so that the iOS devices can actually visit them.  I can still watch YouTube videos et al.  About the only thing I can't do is play Flash games... but they're a resource hog anyways. 
    Try going without for a day or two and see just how many sites you visit no longer require it.  A lot of people keep it installed out of habit, not out of necessity.  If you have Flash installed, visit a site and it's out of date, it will tell you to update your Flash.  What it won't do is tell you is that had Flash not been installed, it would have used the HTML 5 code instead.  Think about it... if an iOS device can't run Flash at all... it can't visit this site if it were written only to use Flash.  What site would eliminate such a huge portion of their market base?  You'd be surprised at how many sites use HTML 5.  Uninstall Flash and see for yourself.

  • What is the best way to update an ALV tree?

    Hello all of you
    What is the best way to update an ALV tree?
    In my case, by double clicking on a branch, a table is updated and an icon should be updated in the alv tree.
    I use the class CL_SALV_TREE
    Thanks for your help

    Call method REFRESH!

  • I have an iPhone 4 with iOS 5.1. What is the best way to update my phone to the latest iOS platform?

    I have an iPhone 4 with iOS 5.1. What is the best way to update my phone to the latest iOS platform?

    you can update over the air with strong wireless signal, or by connecting to a computer running iTunes.  Either works well.  If you do the update over the air, be sure and attach your iPhone to a wall outlet so you have a solid power supply and don't risk the battery dying during the update.
    The iTunes approach installs a much larger file because of the connection, but if you have not updated since 5.1 that might be a better approach...replace the entire operating system instead of patching. 
    Either way, backup the iPhone yourself just for your own protection in the off-chance something should go wrong...a little paranoia while updating is a good thing

  • What is the best way to update your reference images?

    Hello,
    We are using MDT 2013 to deploy Windows 7x64. We have an automated process to generate our reference images using Powershell and Hyper-V. It works great.
    We generate new images once per month, and I would like to know the best way to update the .wims in the deployment share.
    Can I just copy the new .wim file into the deployment share with explorer and overwrite the old one? I assume this method will retain the old GUID in the MDT console. Will new deployments just start using this new .wim as soon as it is coped? Do I need to
    update the deployment share?
    Do I need to import a new OS through the MDT console? Doing this I assume will require me to select the new .wim in my task sequence, since the newly imported OS will have a new GUID.
    Also, these .wim files are used in our test deployment share before our production share. Can I just copy/paste from one share to the other? What does this do to the OS GUID? Does it get a new one or does it retain the old GUID from the original share?
    Appreciate any feedback.

    As long as the replacement WIM is the same version number, and the same WIM Index, I would be OK with just robocopy'ing the install.wim over the old version.
    Replication between the test and production shares should use the same GUID's so you should be OK.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • What is the best way to update the delivery time?

    Hi All,
    One of the tasks I have in my job is to updste purchase orders with information found in the orderconfirmation we receive. In the order screen, ME22N, you can change the date in the item, where you have all positions listed. But you can also change it in the tab classifications.
    What is the best way to update the delivery time?
    Best Regards
    Praveen

    Hi
    It may userfull to you
    If you change the delivery date after you have send the PO, then the statistical delivery date is still containing the old delivery date., as long the order is not send this date is changed together with the delivery date.
    Vendor evaluation is performed based on statistical delivery date.
    So if you are responsible for a date change, then you change both dates, that the vendor does not get bad points. but if the vendor cannot deliver at the wished dates, then you change the delivery date only, that all people in your company and MRP run can rely on the new delivery date, but your vendor is evaluated against the old date, because of his fault.
    regards
    Madhu

  • What is the best way to update iPad 2

    What is the best way to update iPad 2

    If you are still using IOS 4
    Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/d549b56e8567252791a 1834379e59068.jpg

  • Best Way to Update: Over-the-air OR Via PC (Thru N...

    Which way do you think is the best and MOST RELIABLE way to update the Nokia Nseries? Which way do you use?
    1- Over-the-air
    2- Via Nokia Software Updater (PC)
    Your Thoughts?
    Thanx.
    Solved!
    Go to Solution.

    28-Dec-2008 08:47 PM
    grschinon wrote:
    28-Dec-2008 03:44 PM
    nirav_m_suthar wrote:
    Best way to update the firmware is the via PC coz there are many reason like it takes less time than any other methods, very secury etc.
    That is absolutely not true.
    An NSU update for the N96 at least is a 125MB download or thereabouts.
    V10.043 to V11.018 was about 3.5MB via FOTA, V11.018 to V11.101 was no more than a few hundred KB, and V11.101 to V12.043 was once again about 3MB.
    FOTA is far more reliable than NSU since there are fewer machines involved (the phone grabs the update directly from Nokia instead of having it buffered by a machine, a machine running one of the most notoriously unreliable operating systems ever created) and therefore fewer points of potential failure.
    As psychomania pointed out, there are cases of people bricking their phones with NSU daily on these forums. To date, we have see one case of a failed FOTA update. Draw your own conclusions.
    Like our resident psycho, I hope that FOTA becomes far more widespread in the future. It is much more reliable and quick.
    Message Edited by grschinon on 28-Dec-2008 04:50 PM
    although i tend to agree that FOTA should be safer, but i think we might be jumping to conclusions to early, as there are about 91 phones supported by NSU, most of which are updated by the conventional PC way, whereas there are very few that uses FOTA (i knew of 2 handsets), hence the relatively lower incidence of failures...

  • Best way to update individual rows of a Table?

    I've taken a look at some examples, though haven't gotten any clarification on this.  I am looking to have something close to a listbox or table to where I can update just a single column of row values at a 1 time per second pace.  I am looking to display our data-acquisition values in a table or listbox.  The single listbox seemed to work good for this, but I was unable to use row headers to list the channel names next to the channel values.  I was thinking about connecting the cursor values of two list-boxes to do this, but didn't find any info on this for the single list-box.
    I have a few questions:
    1) I have a 1D array to where I want to use that array of data to constantly update the first column (with a multitude of rows) of a table.  I am looking for the best route so as not to take up too much processing time in doing this.
    What is the best way to update individual rows of a table?   Invoke Node "Set Cell Value" ... or is there another method?
    2) Why is it that after every other iteration the row values are erased? 
    Also, for adding additional strings to the original arrray ... is it best to use the "Array Subset" and then the "Build Array" function, or the "Array Subset" and "Insert Into Array" function?
    See the attached example.
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Table Example.vi ‏19 KB

    Jeff·Þ·Bohrer wrote:
    2) Why is it that after every other iteration the row values are erased?
    Classic race condition.  dump the for loop and p-node and just wire the 2D array to the table terminal.!
    I'm not seeing the race condition.  What I am seeing is the table emptying after the last element was written to it on every other run.  I saw watched this with highlight execution on.
    But I'm in full agreement with just writing to the terminal.  It is a 1D array, so you will need to use a build array and transpose 2D array in order for it to write properly.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Best way to update audio files in library

    I have quite a few audio files in the library for a Captivate project.  I just modifed a bunch of them, and I am wondering the best way to update the library.
    If I delete the files in the library, I lose all the links to which audio went with which slide.
    If I go into each slide and replace the audio, that is more time consuming, and still a problem when the old audio file is still in the library
    I don't see an option for directly replacing the audio in the library; if I put the new version (same name) it just adds it with a (2), i.e. audioclip and audioclip(2)
    The update option does not give me what I need, unless I am missing something.  First of all, I am using both a Windows computer at the client site, and my own Mac, so the paths are different.  To use the update I would have to update the path for each audio file, which is more trouble that updating every file manually.
    Any ideas?
    Thanks.

    Hi there,
    The recommended way is to go to that slide and import the slide audio again, new audio will replcae the old.
    Once you have replaced all the audios, the audio files that are not in use in the project will still show up in Library.
    You can get rid of all unused items from the library, by clicking on the icon for unused icon and then delete icon:
    Thanks.

  • Best way to update RBSELBEST table for invoice

    what is the best way to update RBSELBEST table for PO invoice? Is there any BAPI or FM for this?

    Thanks. I tried this one also, but it does not update the table.
    in case if someone used this, what parameters i need to pass for this to work?

  • Best way to update a polygons position?

    What is the best way to update a polygons position? I don't want to create a new one each time, and there is no setBounds method.

    I'm sorry. I meant. Say my array of x positions is 3, 4, 9. I change 9 to 30. How can I make the polygon see that change?

  • Best way to update exposed schema as WCF service ?

    Hi,
    I am newbie to WCF + BizTalk. I am doing small POC's on exposing & consuming orchestration & schemas as WCF service. I had successfully exposed schema as WCF service also consumed this service using C# client code.
    My question is that suppose if there is a change in the existing exposed schema say a field has to be added then what is the best way to update a service. Do we need to add a field in schema & again expose this schema and update our service referernce
    in the client code ? Or this can be achieved in a better way ???
    Regards,
    Rahul Madaan
    BizTalkVillage.blogspot.com

    Hi Rahul,
    When you expose Orchestration or Schema as a WCF service and let's say if there are only few fields which got updated/added then there are multiple options to handle it.
    For example-
    1) You can go ahead and update the XSD files within AppCode folder. You can find this folder by doing explore on web application(in iis manager). Whenever we expose schema or orchestration these schemas are generated and kept in this folder. When you check
    the WSDL it will have reference to these schemas and they will define the contract of incoming and outgoing message(request and response). This is the easiest way. I prefer it for Dev environments and testing.
    2) But I would suggest you to run the publishing wizard again as it's less error prone.
    Please understand that BizTalk will always remain unaffected of the type of message it receives from the isolated host, the actual problem comes when hits the first receive shape(typed message).
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Best way to update an indicator

    I've attached a very simple vi to demonstrate my question.
    I'm making a test using the state-machine architecture. In the test, there is an indicator on the front panel which is to be updated at various places in the test.
    My question is ... what is the best way to update the value of the indicator? In the vi, I've wired it directly, used a property node and used a local variable, all of which achieve the same result.
    The first way - directly wiring - is obviously the best way if I have access to the input terminal of the indicator (as in state '0').
    But what if I need to update the same indicator from the second or third states? What are my options here?
    This is only a simple demonstration vi, so please don't say 'move the indicator outside the case structure and wire it through a tunnel', I know I can do that here. My 'real' vi updates the indicator several times within the state and I currently do using property nodes. I read somewhere that this isn't very efficient, which is why I'm asking this.
    Regards,
    Sebster
    LabVIEW 8.6, WinXP.
    Attachments:
    Update an indicator.vi ‏9 KB

    They look the same but they are implemented very differently. See this thread for some performance numbers.
    The control terminal is the most efficient technique. If you read the docs on creating XControls there is an explicit warning to only use the terminal and in cases where the indicator gets updated in some conditions and not others, we need to move the terminal into a following case and use a boolean to decide if we are writing to the indicator.
    I thought I had this list tagged already but i could not find it so here it goes again.
    In order of speed fastest to slowest.
    1) Terminal (VL has optimized code that let the update slip in thru a back door.
    2) Local but these require additional copies so the data has to be copied to each instance of the local.
    3) Property node has to use the User Interface thread to update. This means waiting for the OS to re-schedule the work after the thread swap.
    Both Locals and Property nodes can result in a Race condition if you use the indicator for data storage. See my signature for a link to avoid Race Conditions using an Action Engine.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Best way to update GUI

    Hi, I have a 'business model' class which holds all my variables that are displayed on my GUI which is a seperate class. As these variables change quite frequently while running the program I need some advise on the best way to update my GUI as need be. I'm using a controller with actionListeners to deal with changes going in the opposite direction. So can I manipulate this approach to suit my needs or should I implement Observable which I've read somewhere else?

    user8844058 wrote:
    Yea that sounds viable to me too DrClap I just can't seem to find any examples of it in action! Would you use events in a non GUI class to achieve this?A bit late - NY time here.
    Example:
    1. User enters data on a GUI;
    2. A button is hit on the GUI and some data is taken as user entries and sent to the contoller;
    3. The controller uses that data and acts as a dispatcher to act on what is requested by calling whatever business logic is required, and the model gets populated appropriately;
    4. Once the model is populated the relevant results are returned to the GUI;
    5. The GUI now represents the results of that population.
    I realize you marked your question as answered, but was, or is your question: "how does (or what is the best or most oftenly used way that) the GUI (view) gets, or knows to get the results of the request?"
    Edited by: abillconsl on Apr 13, 2011 12:42 PM

Maybe you are looking for