What is the best way to work on multiple songs in one long recording?

I often record the local open-mic nights and generally just leave logic recording the entire night so i end up with lots of songs/bands in one big recording.
What is the best way to work with such a recording? Is there a better way than just using the event marker when a new band plays?
Also once i get home id like to save each band to a separate project but i cant seem to find an easy way to do this?
Obviously each band needs a different mix hence needing separate projects? or am i missing a much better work method?
any help greatly appreciated!
many thanks

As for your second point, just do a "save as" new file name and cut and erase any unwanted audio from the arrange window (ie. the bits that aren't in the song you want separate). You can do this for as many songs as there are and create a different mix for each one no problem. You multiple select and drag all the regions to the beginning of the arrange window (make sure you do them at the same time so's they don't go out of synch. All the separate songs and mixes can be saved in the same project folder as the original audio files are stored in (the folder structure should be there already if you started a new logic project, so no need to change that.
I would think using markers so you know where each song begins during the show, and the above method after, would be a very good way of organizing things. You may want to stop actually recording between bands too though I expect you are already doing this.
Its really as easy as that. Sometimes things just are.

Similar Messages

What's the best way to load balance multiple protocols on one vserver?

Hi,
We have a CSM blade on a 6513, in bridge mode. I'm just wondering what is the best way to serve HTTP and HTTPS (or any two or more ports) from the same group of servers. As I see it, we have two options:
1. Don't set a port on the vserver, so it is load balancing "any" or "tcp". This is easy but I want to be sure there isn't a downside to this, other than the obvious security issue.
2. Create multiple vservers and point them at the same serverfarm. I tried this and I got some odd results with the health checks.
Any ideas? Thanks a lot.

you listed the only 2 options available.
The advantage of solution #2 is that you can apply specific config for each protocol ie: for HTTP you can turn 'persistent rebalance' if needed.
If you want to use specific probes [not icmp], it is also a good practice to create a different serverfarm for each protocol.
Like this, if the HTTP service goes down but not the server, you can still have other protocols loadbalanced.
Regards,
Gilles.
Thanks for rating this answer.

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

What is the best way to work with AVCHD 720 24p footage in FCE4.1?

Hi I have a Panasonic HMC-150 and I've been shooting 720 24p footage at 21 mbps transfer rate.
I was wondering what is the best way to work with this material in FCE 4.1? I see that in the easy set up menu they only have the option of 1440X1080i at 50 or 60 fps or 1920X1080i at 50 or 60 fps.
Also in the rates drop down menu there is only 50 or 29.97.
So I was wondering which is the best choice for 720 24p footage and will it look alright in any of them? Also is it possible to customize these settings?
And finally can you work with faster transfer rates (21mbps) in FCE?

Yikes, this is going to be tricky since FCE does not support native 24p editing.
The work around for some of us is that AVCHD material that is 24p is often recorded to disc at 60i using telecine, in which case it can be editing at 29.97 frames per second, and then detelecined afterward for final export at 23.98 fps. The problem is that I think your camera actually records real 24p - not 24p packed into 60i. When you import the material from the camera what does QuickTime report the framerate as?

What is the best way to work with mixed media in 1080 timeline?

Hi there,
I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
What is the best way to work with this mixed media?
Thanks!
Steven

Hi Shane,
Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
1) I will work in a 1080p FCP sequence, correct?
2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
Thanks very much for all your help it has gone along way,
Steven
Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
Best to capture all the footage to one uniform codec.
Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large

In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large volume?
We have 300 pdf reports and need to insert a 2 page cover page infront of each report. Not sure if Batch processing is best???
Thanks for any tips.

Probably each cover page is different too. I would probably just bite the bullet and do each individually. I would create the 2 cover pages in WORD or other word processor and print to cover.pdf. Then open a PDF and Pages>Insert Pages or the cover.pdf to the front of the open PDF and save as to the current PDF. Then repeat 299 times. Each time you would make the appropriate change to the DOC file and print a new cover.pdf file (you might want to turn off open in Acrobat for this processing in the printer properties to save time). Probably a good idea to keep a list of the files to check off what has been done (you can generate a list in DOS by Start>cmd, change the directory to your location [cd path], and do "dir >>list.txt". That will give you a list to use.). There may be an easier way, but by the time you get it figured out you might be done this way.

What's the best way to capture speech as text in live or recorded Adobe Connection sessions?

Hi
What's the best way to capture speech as text in live or recorded Adobe Connection sessions?
We would like to have a transcript of the presentation. Is Adobe Connect compatible with Dragon speech recognition software - or is there a preferred Adobe product or method?
We use PCs running Windows 7 Enterprise.
thanks

The class java.util.Date is not itself deprecated, however several of its methods are.
For converting string -> date, you should use the class java.text.SimpleDateFormat. That allows you to specify format strings such as MM-dd-yyyy hh:mm:ss for converting date -> string -> date.
If you are wanting to set day/month/year on the date object directly, instead of the Date methods setDay, setMonth, setYear, you should instead use the java.util.Calender class:
calendar.set(Calendar.MONTH, 4);
The calendar can then be converted to a Date object by calling calendar.getTime().
If you are going to use the date as part of a sql query, I would recommend using a Prepared statement, and the java.sql.Date/java.sql.Timestamp class as well.
To convert from java.util.Date to java.sql.Date)
jva.util.Date utilDate = Calendar.getInstance().getTime();
java.sql.Date sqlDate = new java.sql.Date(utilDate.getTime());cheers,
evnafets

What is the best way to move an iPhoto library from one internal drive to another internal drive?

the drive where my iPhoto library is store is just about full. I have a second internal SSD that I'd like to move (not copy) the library to. What is the best way to do that and still ensure that iPhoto will access the library in its new location?

Just drag the iPhoto Library package from the one drive to the second disk. Launch iPhoto with the Option key held down and select the library in it's new location on the second disk. Once you're satisfied that it is working satisfactorliy you can delete the copy on the first disk.
OT

What is the best way to operate 2 separate iphones on one computer

HI - HELP PLEASE.....
My wife has an iphone and an itunes account registered on her computer - i have just bought an iphone and i want to register it to the same computer, create and itunes account, but we want to keep out apps & music ect seperate - what is the best way of doing this? Thanks.
rb999

The best way is a matter of personal taste. The Apple support document How to use multiple iPods with one computer suggests a number of ways, each with their own pros & cons. For instance if you generally share one profile on the computer already, creating another just to support a different iTunes library may be inconvenient. Switching libraries within the same profile ought to be as easy as opening two different documents, but it isn't. If you have some cross over in your taste for music and apps you may find a shared library is actually easier to manage.
We don't have two iPhones in the family as yet but as I understand it each device can have separate settings for syncing calendars and contacts. For example my iPhone syncs these over the air with the Exchange server at work so if/when my wife gets an iPhone it would be easy to have hers sync to our computer.
If you go down the shared library route you can make sure your apps don't inadvertently merge by turning off Automatically sync new apps from the apps tab when you connect your device.
For media I use the sync with selected playlists method with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iDevices using this system, each getting a different selection to suit their tastes and the capacity of their device. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed and need rebuilding. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

What is the best way to work with a large amount of data?

Assume you have a big text file to work that you need to store and work with, what would be the best way to do that?
I will be adding / removing a lot of elements so I really want to stay away from array resizing overhead.
I don't want to step on any toes here, but would binary trees / linked lists in C++ be a better solution?

Assume you have a big text file to work that you need
to store and work with, what would be the best way to
do that?Parse it into a database. Then use SQL to manipulate.

What is the best way to set up multiple Apple devices ?

Lime many of us here I have quite a few apple devices and I just wondered whet the best way to set them up with itunes / Apple
my Apple gear:
Mac mini 2.53 with Mountain Lion
Mac Mini 1.6 duo Snow Leopard
Iphone 5c (mine) running 8
Iphone 5c (wifes) running 8
iPad 2 (old) 64 GB running 8
iPad Mini 2 retina 32 GB running 7
g3 iMac (running Tiger) Juke box (semi retired ;-) now)
At the moment all devices (apart from new Mac mini 2 and the old G3) are set up under my Apple ID ... (1 Apple ID for all devices) ... obviously this has problems : my wife downloads an App it will appear on my phone; we have had to disable some of the messaging systems as at one point my wife was getting my messages et ... is there a better way to do this?

cosmiconion wrote:
one drawback of same Apple ID for store is that what she downloads will automatically appear on all devices
Do you mean the visibility of the purchase in the App Store (under purchases) or the installation of the app automatically on the other devices?
In the App Store on the device (under iOS 8 at least on the iPad, I couldn't get it to work on my iPhone 5 under iOS 8), you can hide purchases...just swipe it to the left in the Purchased list. You can then unhide the hidden purchase(s) if desired by using iTunes on the PC/Mac under your iTunes account.
Auto App updates (Automatic Downloads) can be controlled under: Settings/iTunes & App Store, scroll down to Automatic Downloads and disable those that you do not want.

What is the best way to handle executing multiple packages from the Agent?

I have several packages that have to be executed in sequence. I thought the best way to do that was by creating a job for each package then have a master job that executes the other packages. In my master job, I'm using sp_start_job to call the other
jobs. The problem is, the master job moves from step to step without waiting for the child jobs to finish; basically they all execute together.
That is the way I've seen it done in other places so I feel like I'm doing something wrong. In the alternative, I know it's possible to set the individual steps up so they execute the packages directly without calling an external job. I prefer the first
way though.
Which way should I jump on this?

So basically what I'm hearing is just call the packages in a mulit step job. Creating a master package and calling child packages sounds a little crazy and unscaleable especially considering that the packages have master child relationships
within themselves. It's SSIS Package Inception.
Sorry whats the issue with that?
Provided you're setting the package sequence correctly based on your dependency it will work fine as loop gets iterated based on how you set the package list.
What we have is a audit and control mechanism which even have details on the dependency so based dependency set only the packages gets ordered and listed for the loop to iterate through and executing. Also tomorrow if a new package comes into being, all
it takes for us is to tweak the audit table to add a new entry for the package and set the dependency and it will continue to work fine including the new package without touching the existing job for any modification whatsoever.
Another advantage of this table is we also capture audit details in it like date when package got last executed, its status of execution,rows processed (insert,modified, deleted) etc which can be used for easy monitoring of the data processing tasks as well.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

What's The Best Way To Work! Local or Remote...

I have been working with Dreamweaver for just about 4 months now, but I'm struggling with finding the most preductive way to work.
Do you work in the local view or remote view.
With local all of the links with images all need to be changed when going live, but this is alot of work having to go through all the images again.
What do you guys do?

If your site is properly defined, you should never need to mess with changing links.
You should be working on local files, then uploading them when they're ready. When uploading, you should be moving files from your Local Root Folder to your Server Root Folder and they should appear with the exact same file structure from one to the other.
If your site isn't set up correctly in DW, you might accidentally be uploading files from something other than root folder to root folder which would cause all kinds of linking issues.
Here is a video with instructions to properly set up a Site Definition in DW...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

What is the best way to work on the same InDesign file in different locations?

I'm the creative director for an in-house creative department. We produce 37 catalogs and a multitude of print and electronic advertising each year, plus a variety of other items. Our problem is that we have two locations. In the current set-up, if I want someone at one location to work on a project but the files are at the other location, I have someone at the one location package all the materials involved with that project and either upload them to DropBox or copy them to an external drive and ship it. Not very efficient.
We have servers at both locations but there are different files at each location. I'm able to remote from my computer into a computer at the other location, but if everyone were to do that we would need double the number of CC subscriptions and computers, and it would bog down the internet connection that the entire company uses. I'm also connected to the server at the other location (again, over the internet) and have opened InDesign files that reside on the server there and tried to work on them here (over the internet) but that is much slower than remoting in.
The only way I can think of to alleviate this problem is to run duplicate servers at each location, but this would be an update and back-up nightmare (unless I'm missing something). Is anyone operating this same way and, if so, how are you dealing with it?
We can't be the only company that works like this. Maybe I'm just missing something.
Thanks,
Lloyd

We have servers at both locations but there are different files at each location. I'm able to remote from my computer into a computer at the other location, but if everyone were to do that we would need double the number of CC subscriptions and computers, and it would bog down the internet connection that the entire company uses. I'm also connected to the server at the other location (again, over the internet) and have opened InDesign files that reside on the server there and tried to work on them here (over the internet) but that is much slower than remoting in.
One tiny thing bothers me about your setup. And you said it above, you would need double the number of CC subscriptions and computers. Are you using two people to access under the same CC subscription. Even if they are working in two different time zones, it is technically violating the rules and spirit of the rules of being able to install on two machines at the same time.
You're allowed to install for two machines for one person working at the office and then at home. One person wouldn't be in two different locations at the same time.
Meanwhile, regards your problem, I remember reading about a system many years ago that was pretty simple. It was based on an old newspaper/magaizine system of "who has the folder." (Created before computers) In the old days, if someone was working on a file, they left a folder with their name in its place.
In the computer age, one person, working on a file, would move it to their desktop. Then, they would leave an empty folder with that document's name where it had been as well as their initials. So if I took "Shoes and Socks Fall 2015.indd" out, I would leave a folder named "Shoes and Socks Fall 2015_smsc" in its place.
And if it was necessary for me to have the images, I would make a copy of them onto my machine so I wouldn't tax the network. Then when I was finished, I would copy the file back to the server. The links should show up. If not, we could relink later.
With the empty folder on the server, anyone could tell who is working on a project. So if they were late getting it back, you could email them.
It relies on the people being disciplined enough to make the folders, move the docs, etc. But since you've ruled out all the systems for companies with dumb employees, you're going to have to make them follow the rules.

What is the best way to switch between multiple image buffers? AND How to synchronize saves?

Hello,
I'm trying to flip-flop between two buffers and wondering the best possible solution for this. I'd like to acquire an image in one buffer, send that off to be processed, and then while that's being processed acquire a second image. Right now I have a "Create IMAQ vi" in a for loop and have it creating 10 image locations. I'm using a non-NI framegrabber (shame I know) which makes things a bit more difficult to replicate. I have two while loops. One while loop currently grabs images from the framegrabber and places in the 10 different locations. The other while loop currently holds a case structure that does the processing. I have created a local variable that holds all of the image locations and reads those to be processed. I don't know if this is actually making things faster or if it's better to just make one image location.
I have two images attached. One image is the Grab While loop. Since I have an array of locations, I have to use a for loop and index each one out to my display. I then have a shift register to carry the image location info over to the next iteration of the while loop.
The second attachment is the bulk of the main while loop. It shows what happens to the image while it's being fully processed in the left case structure. I know it does not look like much but one of the cases (which is called by Boolean Image FFT) is a subVI that does most of the processing. I believe that is what really slows it down because of how that program is written.
The right case structure shows my saving mechanism. I have two file paths. One to save the image and the other to save the processed image. I have a sequence to make sure they save at the same time once it gets to that point.
The problem though is the following:
In the grabwhileloop.png, you can see that I have a timing to see how fast the images are being acquired. This value is approximately 60 fps (which is the rate of the Basler camera). There is a similar set up in the main loop case structure. This processes very slowly and is approximately 1.04 fps. Which would mean that the image I turn into an array in the left case structure in the main while loop image is more than likely different than the image I'm trying to save off in the right case structure since the grab is occurring at the same time. I'd like to have the processed image to save alongside the image I am processing.
Sorry for the big bulk of text. This code has come a long way as it is. If you have any suggestions on making it faster or more efficient please feel free to chime in.
Thanks,
Rob
Attachments:
GrabWhileLoop.png ‏34 KB
MainWhileLoop.png ‏68 KB

Thanks for the comment. I have looked into the producer/consumer architecture, but to be honest, I'm not quite sure how everything will work while doing that. I have seen the example codes, and I have thought about implementing (or at least attempting to) but I'm still unconvinced that it will run that much more efficiently. There is other setup outside of the images that had to be done outside of either while loop. Also, I don't know where I would put both loops.
Last time, I attempted to put the grab while loop inside of the state machine. Things got chopped because it took so long to go through the main while loop's "acquisition" state (which is really the processing state). I needed both to simultaneously run. The grab reset every time it went to the "grab" state which is not what I wanted. The only way I can thing to have combatted this was to combine the grab and acquisition in the same state. If that were to happen, I'd take out the for loop and grab one image at a time. However, that would still probably make things even slower than they already are.
In terms of the doing something before an image is assigned in for loop, I don't need that pixel sum value to refresh too quickly. As it is already, the main while loop is slow enough as it is, so I am more afraid that everything will run too slowly the more I do. I know where the bottleneck is in my code, but I can't really see a way to "even out the flow". Even if I moved to the other architecture, I feel it'd take the same amount of time that it does already.
From my debugging, the Image local variable in the main while loop seems to refresh as quickly as the grab while loop spits it out. Granted once the main while loop finally completes, main images have gone by. This is what has to be though because it just take up so much processing power to run through the main while loop state.
As a side note, does labview have an issue with acquiring images in real-time that you have heard of? I ask because when I run the code, there is a solid white line that I'm supposed to see in my display. Every time things either time out or something, the line moves which is not supposed to happen. The line also moves every time I place my mouse cursor in the display or if I spin the mouse wheel to scroll. If I don't do either of those things, it'll eventually move on its own.

What is the best way to work on multiple songs in one long recording?

Similar Messages

Maybe you are looking for