What is the Better choice to export, XML or AAF?

I Know FCP does not support AAF natively. But I need to send my sequence to Avid, so my idea is export
as .xml and open it in Premiere CS5, and then export as AAF from Premiere to open my sequence on Avid.
Does anyone have a better idea? What is the best workflow to do what I need?
ps* I don't have Automatic Duck

That's from 2004... lightyears ago.
Try your idea...but I don't know how well it will work. How will Avid connect to the media and all that.
the BEST workflow is Automatic Duck. Don't have it...get it. Simple, straightforward...and it works. You can also try Boris AAF...cheaper. I haven't tried it...I use the Duck.

Similar Messages

My PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an Update for a newer version of my op.sys. software, or, what is a better choice of an Upgrade?

my PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an UpDate to a newer version of my op.sys. software, Or, what is a better choice of an UpGrade to a newer/different op.sys. software ?
Thanx!

The best maintained PowerPC browser at the moment is TenFourFox:
http://www.floodgap.com/software/tenfourfox/
It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
FYI: Speed-up for TenFourFox on PowerPC

What is the best way to export a cutterline from photoshop?

What is the best way to export a cutterline from photoshop?
Wie exportiere ich am am besten einen Schnittlinie aus Photoshop? Ich bekomme von einem Wort immer nur den ersten Buchstaben exportiert, obwohl alles gerastert auf einer Ebene liegt.
Thank you! Vielen Dank!

What are you talking about exactly?
If you need to export vector data Photoshop is not the first choice but if you have Type Layers (without faux styles), Vector Masks or Paths it is possible.
alles gerastert auf einer Ebene
does not seem to make sense in this context though.

What JVM do you use? What is the best choice?

We may be rolling forward Discoverer 10.1.2 sometime in the near future. The current release uses Sun J2RE 1.4.2-06. There is a J2RE 1.4.2-09 available, as well as JRE 5.0 Update 5. Deploying JVMs is a pain when potentially hundreds of PCs are involved, and I'm sure there will be a version of Discoverer sometime in the future will prefer a different JVM.
What's the best choice, which JVM is supported & solid with the existing 10.1.2 release as well as potential future releases?

Hi,
the plus works as standard with J2RE 1.4.2-06. Right, but that isn' a must cause you can change that.
Oracle said this:
"Dynamic Versioning for SUN Plug-in is a standard Sun feature and is described at Sun website:
http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/using_tags.html#in-ie
The changes documented are not supported by Oracle. While the changes documented have been tested on a limited number of platforms, these changes are provided without any claims to their accuracy"
The solution is easy:
1. Under the path ...\discoverer\config from App-Server you find the 'configuration.xml' file
2. Open this file and search for 'jvm name' for 'sun'
3. Change the classid="clsid:CAFEEFAC-0014-0002-0004-ABCDEFFEDCBA" (static versioning ! ) through this classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" (dynamic versioning !!) and save the file
4. Restart the discoverer App-Server - ready
From now the Plus will use every version above J2RE 1.4.2-06 and only if there is an older version he will download his own version.
We tested this with several versions 1.4.2-xx and with JRE5-3. It works.
Regards
Norbert

Which would be the better choice?

I am presently using a EOS T3. What would be the better choice for an upgrade? A T4i, T5i or 60D?
Solved!
Go to Solution.

Good.
One thing you don't have is a wide aperture lens. With the savings plus just a bit more you should treat yourself to a 50mm f/1.4, or for just $100 get a 50 f/1.8. They do almost magical things wide open and close to a subject. Subject is isolated, background is blurred bokeh, background lights are big round disks. Plus they are great in low light. Too fun.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

What is the best way to export a movie to avoid losing quality?

I need to get a movie I made on a DVD somehow, but I seem to loose quality in color and overall sharpness when I take it into iDVD and burn a disc. This movie will be projected very large, so I need the best quality possible. What is the best way to export it for the highest quality?

There's been a ton of testing reported here on this issue, but I don't think there is a consensus on the "best" method. For one thing, it depends on what you're starting with.
In my experience with DV video and hi-res photos, it was tough to beat the result I got exporting "large" to the media browser. (Because of my DV footage, HD was not an option.) This made a H.264 file. I could only get a slight improvement by exporting via Quicktime to a H.264 file at double the resolution of the "large" file made by iMovie. Of course this took longer to export and for iDVD to encode. Overall, I'd say it wasn't worth it for the barely visible improvement. That improvement was only detectable in the slides, BTW, not in the DV video.
Many recommend exporting to AIC, which should be an essentially lossless export out of iMovie. This is what the share to iDVD supposedly does, I got poor results with any flow that used an AIC file exported out of iMovie for use by iDVD. Never figured out why, but my results were always better if I compressed to H.264 on the way out of iMovie.

What is the best choice for our project? Thanks

We are a startup company and developing a webiste with two mobile app.
We use PHP in the server side and write with a private framework.
We don't want to use any host-specific APIs so that we can move to other cloud server easily.
In our case, can we use Website option in Azure?
If the answer is yes. What is the best choice for us, VM or website? We need scalability in the future.
Thanks!

hi,
It depends on your requirement. Base on my experience, VM or website all could meet your requirement. From your description, You could use azure website to host your php website (http://www.windowsazure.com/en-us/documentation/articles/web-sites-php-configure/).
And you could use website auto scale feature in the future. I suggest you could see their comparison (http://www.windowsazure.com/en-us/documentation/articles/choose-web-site-cloud-service-vm/
Hope it helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The Better Choice?

I am likely going to purchase a desktop computer (I have a MacBook now) and I was wondering what the better option to run Final Cut Studio 2 on would be.
and iMac
or the Mac Pro
I know the Mac Pro is ideal but I am on a budget and the Mac Pro is quite expensive. I won't be doing any heavy video editing (maybe 20-30 minutes worth) and will be using Motion, and Final Cut. So what would be the better choice?

It's really not so much a matter of project length as the intensity of the editing, and the formats you're using? Is this going to be HD stuff? Are you going to be doing heavy effects work?
This same question (imac vs. mac pro) was asked a few days ago, you may want to look into what he concluded.

What is the better way to change name of a site with paths and links?

Hi!
i m using dreamweaver cs4 and i have a site already configured on dreamweaver
i need to change the name of the site and at the same time, every path names and every links
This site has about 50 pages so i would like to know what is the better steps to do for modified the name of the site unless problem?
I read the informations about 'manage site' but its not clear for me about links and path names!!
thank you

Just use site manager to change the site name. Nothing complicated with that.
What exactly do you mean by changing path names? Do you want to change the name of folders in the site? If so, just change them within DW and it will prompt if you want to update links.

What is the best seeting to export as smaller file size AVI from FCP?

Hi, I know the topic sounds very similar to many of AVI post it had been up, however, somehow, I do not find the right answer that I'm looking for.
I have a couple animation created from QT as "image sequence".
I simply want to export as avi file.
Here is the question I have.
1. If I choose DV/DVCPRO-NTSC, and choose scan mode as Progressive, I get interlacing looking quality video.
2. If I choose compressor type as "NONE" then even I set as "least" quality, the file size will be over 1G..although, that's the quality I'm trying to archive.
Is there any other setting I can choose to get good quality with lower file size avi? I have seen or download avi file on the net with very good quality and still download-able file size...

What is the QT method? (Export from QT Player?)
Yes, 10 hour plus is ridiculous. I'm guessing that there was either something wrong with your Internet connection and/or at the You Tube end of the uploasd/compression process.
Innocentius and Hugh are right; using Compressor (or MPEG Streamclip) and using YT's uploader is the most reliable workflow.(Since Google changed the account verification process, there have been reports of upload problems using Share>You Tube.) In addition, you have more control over the quality of your movie. You can create multiple custom settings in Compressor and then Share > Compressor custom settings. It will go faster if you export out of FCP as a Pro Res 422 file; should take 3-4 minutes top. The Web encode for a 3 minute video in Compressor might take 15 minutes, depending on your system. MPEG Streamclip is probably a little faster.
Russ

What's the better order to install OEM + AS + DB

Hi everbody.
What's the better order to install on RHEL4 Update2:
- Enterprise Manager Control Grid (10gR2)
- Database (10gR2)
- Application Server (10gR3)
And about the $ORACLE_HOME?? How to? Each instalation have a separate $ORACLE_HOME??
Tks!

Rafael,
Save the Grid Control as the last installation. The order of Database and Application Server doesn't matter, however I would personally install the database first.
Please read all Installation Guides' before starting any installations, and follow all pre-requisites stated for RHEL4.
The Installation Guide's states that all products must be installed in separate ORACLE_HOME. As a matter of fact, the Oracle Installer doesn't allow installing any of these products into an existing ORACLE_HOME.
Regards,
Martin

What is the easiest way to export all tables data from Oracle to MS SQL Server?

Hello MS,
I would like to export all tables from Oracle 11.2 to MS SQL Server 2012 R1.
Using the tool "Microsoft SQL Server Migration Assistant v6.0 for Oracle" did not work for me because there are too many warnings and errors regarding the schema creation (MS cannot know it because they are not the schema designer). My idea is
to leave/skip the schema creation to the application designer/supplier and instead concentrate on the Oracle data export and MS SQL data import.
What is the easiest way to export all tables data from Oracle to MS SQL Server quickly?
Is it:
- the „MS SQL Import and Export Data“ Tool
- the “MS SQL Integration Services” Tool
- not Oracle dump *.dmp format because it is a propritery binary format
- flat file *.csv (delimited format)
Thanks!

Hi lingodingo,
If you want to directly export all tables from Oracle database to SQL Server, I suggest you use SQL Server Import and Export Wizard. Because you just need to follow the wizard with GUI, this is the easiest way.
If you want to make some modification for the tables‘ data before loading to SQL Server, I suggest you use SQL Server Integration Services package. For more details, please refer to the following similar thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/38b2bed2-9d4e-48d4-a33f-1d9eed1c062d/flat-file-to-sql-server?forum=sqldatamining
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
regards,
Nick

What is the Better choice to export, XML or AAF?

Similar Messages

Maybe you are looking for