What is the better laptop HP Pavillion 15 CI3 or HP Pavillion 15 N031SA

I was sent the n031sa instead of the CI3 by mistake and wondering whether to send it back. Is it a better laptop? I really wanted the Altec lancing speakers on the CI3 however this one has an optical drive. Basically, should i keep the n031sa or send it back for the CI3 - thanks for your thoughts.

Hi:
Your notebook supports up to 2 x 8 GB of PC3-12800 memory according to the service manual, so yes, you can remove the 4 GB chip and replace it with an 8 GB chip.
Link to the service manual is below.
http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
It is doubtful that you will ever be able to install a 16 GB memory module in that model, but I couldn't say that with 100% certainty.

Similar Messages

  • What is the best laptop for Photoshop Elements 10 ?

    I have HP Pavilion g6 Notebook,i5-245M 2.5GHZ, 4 GB mwmory, 64-bit Operating system window 7, Radeon Graphics, Eidtior not working , I get error message ( Unable to continue because of hardware or system error,Sorry,but this error in unercoverable).
    So I want to give this one to my son, and I want to bay new One for me,
    but i do not want to have same Error with my new Laptop,
    So any one know what is the best Laptop for PhotoShop Elements 10 ?
    Thanks for Helping me .

    I would suggest a machine with a multi-core processor and plenty of storage as photo files take up quite a lot of room over time. Many laptops have a screen resolution of 1366 x 768 and whilst elements will run OK some menu functionality will be missing if the display is not at least 800 pixels in height. A resolution of 1600 x 900 would be much better.
    Independent advice is best, such as Which, UK. You can get a trial membership for as little as £1 to access their recommendations.
    http://www.which.co.uk/technology/computing/reviews/laptops/best-buy/verdict/

  • What is the better way to change name of a site with paths and links?

    Hi!
    i m using dreamweaver cs4 and i have a site already configured on dreamweaver
    i need to change the name of the site and at the same time, every path names and every links
    This site has about 50 pages so i would like to know what is the better steps to do for modified the name of the site unless problem?
    I read the informations about  'manage site' but its not clear for me about links and path names!!
    thank you

    Just use site manager to change the site name. Nothing complicated with that.
    What exactly do you mean by changing path names? Do you want to change the name of folders in the site? If so, just change them within DW and it will prompt if you want to update links.

  • What's the better order to install OEM + AS + DB

    Hi everbody.
    What's the better order to install on RHEL4 Update2:
    - Enterprise Manager Control Grid (10gR2)
    - Database (10gR2)
    - Application Server (10gR3)
    And about the $ORACLE_HOME?? How to? Each instalation have a separate $ORACLE_HOME??
    Tks!

    Rafael,
    Save the Grid Control as the last installation. The order of Database and Application Server doesn't matter, however I would personally install the database first.
    Please read all Installation Guides' before starting any installations, and follow all pre-requisites stated for RHEL4.
    The Installation Guide's states that all products must be installed in separate ORACLE_HOME. As a matter of fact, the Oracle Installer doesn't allow installing any of these products into an existing ORACLE_HOME.
    Regards,
    Martin

  • What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

    In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
    Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
    While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
    can give the information about the below questions
    whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
    and  what are the better load/performance tools available for Flex Remote Objects?

    Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common.  Just make sure they are thread safe ("var" or local.* all your method variables).
    You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently).  They have mechanisms for handling and caching singletons.  Then you wouldn't have to go to the application scope to get your CFC instances.
    -Carl V.

  • How to map journal fields and whats is the better  process type

    /Journal/JournalSuspenseCostCentre     NULL
    /Journal/JournalBalancingCentre     Lookup from Organisation ID
    /Journal/JournalMultiCompany     u2018Nu2019
    /Journal/JournalBatchNumber     NULL
    /Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
    /Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
    /Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
    How to map journal fields and whats is the better  process type idoc/proxies?please let me know
    Journal Line
    Multiple journal lines per header:
    Schema Element     Data
    /Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
    /Journal/JournalLine/JournalLineAccount     Bank account control Account Code
    /Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
    /Journal/JournalLine/JournalLineVolume     NULL
    /Journal/JournalLine/JournalLineDescription     Payee Name
    /Journal/JournalLine/JournalLineChequeBookReference     NULL
    /Journal/JournalLine/JournalLineMatchField     Cheque Number
    NB Contra accounting entries should be posted to:
    Schema Element     Data
    /Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
    /Journal/JournalLine/JournalLineAccount     Bank account control Account Code
    /Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
    /Journal/JournalLine/JournalLineDescription     Payee Name
    /Journal/JournalLine/JournalLineMatchField     Cheque Number
    /Journal/JournalPeriod     Current General Ledger Period
    /Journal/JournalYear     Current General Ledger Year

    It looks you are new to PI,
    you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
    Search in sdn for one end to end scenario you will understand easily
    Regards,
    Raj

  • What's the better approach?

    Hi, I was just making a program that access a DB through JDBC, and I got myself into this dilemma
    What's the better approach to make a connection to a DB?
    approach #1(use of singleton pattern)
    import java.sql.*;
    public class DBConnection {
        private ResultSet rs;
        private Connection conn;
        private PreparedStatement ps;
        private static boolean singleton = false;
        private DBConnection() throws Exception{
            Class.forName("driverPath").newInstance();
         conn = DriverManager.getConnection("url", "user", "pass");
         singleton = true;
        public static DBConnection getInstance() throws Exception{
            if(singleton)
             return null;
            return new DBConnection();
        protected void finalize() throws Throwable {
            //close the connection and release resources...
            singleton = false;
        //Methods to make DB querys and stuff.     
    }approach #2 (make a connection only when doing querys)
    public class DBConnection {
        private ResultSet rs;
        private Connection conn;
        private PreparedStatement ps;
        public DBConnection() throws Exception {
            Class.forName("driverPath").newInstance();
        //Just some random method to access the DB
        public ArrayList<Row> selectAllFromTable() {
            ArrayList<Row> returnValue = new ArrayList<Row>();
         try {
             conn = DriverManager.getConnection("url", "user", "pass");
             //make querys and fill the arraylist with rows from the table
         } catch(Exception ex) {
             returnValue = null;
             ex.printStackTrace();
         } finally {
             if(ps != null)
                 ps.close();
                if(rs != null)
              rs.close();
             if(conn != null)
              conn.close();
         return returnValue;
    }I know this classes maybe don't even compile and I don't handle the Exceptions, I'm just trying to make a point about how to manage the connection
    So, what it's the better approach in your opinions? #1? #2? neither?

    Hi,
    I'm resurrecting this thread to ask is this approach OK?
    I'm trying to make a single MySql JDBC connection accessible throughout the model.
    I'm planning to use it in a Swing application. Whilst I realise the Swing apps are inherently multi-threaded, everything I plan to do can (I think) be done within the constraint that all access to model happens on the EDT, and the user will just have to wear any unresponsiveness.
    package datatable.utils;
    import java.sql.Connection;
    import java.sql.DriverManager;
    import java.sql.SQLException;
    abstract public class MySqlConnection {
         public static final String URL = "jdbc:mysql://localhost/test";
         public static final String USERNAME = "keith";//case sensitive
         private static final String PASSWORD = "chewie00";//case sensitive
         private static final Connection theConnection;
         static {
              String driverClassName = "com.mysql.jdbc.Driver";
              try {
                   Class.forName(driverClassName);
                   theConnection = DriverManager.getConnection(URL, USERNAME, PASSWORD);
              } catch (Exception e) {
                   throw new DAOException("Failed to register JDBC driver class \""+driverClassName+"\"", e);
         public static Connection get() {
              return(theConnection);
    }Is there a better solution short of c3po? Which I played with, but couldn't work out how to configure.
    Thanx guys (and uj),
    keith.

  • What is the better download , software or internet?

    what is the better download, software or internet?

    I wish I understood your question. Software is downloaded from the Internet, so I have no idea what you are asking. You can't download the Internet.

  • HT2822 What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n???? does not support with ethernet gigabit?

    What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n????
    Does not support with ethernet gigabit?

    If you have stable wifi with good connectivity it should work fine - in reality many people struggle with wifi.
    I was plagued by interference issues with wifi whenever the microwave was used and would always use ethernet now as my first preference for stability.
    As the house is not wired for ethernet several years ago I tried mains powerline network adapters that are made by many companies.
    I use these from Devolo currently:
    http://www.devolo.co.uk/consumer/81_dlan-500-avmini_starter-kit_product-pictures _8.html?l=en
    They are excellent and you can create a wired network in minutes without running long lengths of cable.
    As with wifi they never achieve the highest rated speeds and are dependent on the wiring quality but are more than adequate for HD streaming to multiple AppleTVs.
    Many other manufacturers produce these eg Belkin, Netgear etc as well as lesser known brands.
    AC

  • What is the better printer the c4680 or the c5180

    What is the better printer the c4680 or the c5180

    Hi,
    What do you mean by better ? I would buy the C4680 for its support
        http://support.hp.com/us-en/product/HP-Photosmart-C4600-All-in-One-Printer-series/3739148/model/3739...
    Not the other:
      http://support.hp.com/us-en/product/HP-Photosmart-C5100-All-in-One-Printer-series/1153538/model/1153...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the Better choice to export, XML or AAF?

    I Know FCP does not support AAF natively. But I need to send my sequence to Avid, so my idea is export
    as .xml and open it in Premiere CS5, and then export as AAF from Premiere to open my sequence on Avid.
    Does anyone have a better idea? What is the best workflow to do what I need?
    ps* I don't have Automatic Duck

    That's from 2004... lightyears ago.
    Try your idea...but I don't know how well it will work.  How will Avid connect to the media and all that.
    the BEST workflow is Automatic Duck.  Don't have it...get it.  Simple, straightforward...and it works.  You can also try Boris AAF...cheaper.  I haven't tried it...I use the Duck.

  • What is the better way to pass input parameters between components?

    Hi all,
    I had a dispute with a colleague about passing data between different WDP Development Components. The situation is like this:
    Colleague has a SearchWDP (parent) und I have a BrowseWDP (child). After searching for some objects and clicking a hit in the SearchWDP, the corresponding details should be shown in BrowseWDP, via passing a bunch of parameters such as selected item's id, etc.
    Now which of the following is the better practice:
    - Defining a node in BrowseWDP (child) with isInputParameter set to TRUE, creating a similar node from the same type (simply via ModelBinding, both WDPs are using the same model) in SearchWDP, and defining a mapping between them so that SearchWDP fills the input nodes. From BrowserWDPs perspective, I'd call this Pull method.
    or...
    - Defining a node in BrowseWDP (child) with isInputParameter set to FALSE, creating a setter method in BrowseWDP Interface Controller for the collection (to be passed as parameters) and calling a wdContext.nodeBlaBla().bind(pInputParameterFromModelType). From BrowserWDPs perspective, I'd call this Push method.
    The colleague's argumentation in favor of Push has not convinced me at all and I'd like to ask your opinions. Is there a best practice or recommendation for this scenario? TIA
    ps: Any answer will be rewarded.

    Hi Cuneyt,
    Refer the links below, they are very informative!
    http://help.sap.com/saphelp_nw04s/helpdata/en/22/15a441cd47a209e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/67/cc744176cb127de10000000a155106/content.htm
    These links are a part of the WebDynpro ABAP documentation, but the concepts are same for WDA and WDJ.
    Considering your scenario, I would recommend the first alternative you have mentioned (if you refer the second link its called External Context Mapping), where component controller context node of component A (SearchWDP) is the source for Interface controller context (same name) of component B (BrowseWDP).
    Thanks.
    Chitrali

  • I now have 4 itouchs, 1 ipad mini, and three iphones for my own family members.  What's the bet way for me to setup itunes so that we can all share the same music, apps, movies, shows, etc?

    I now have 4 itouches, 1 ipad mini and 3 iphones in use by my direct family.  What's the best way for me to set things up so that we can all share the same music, apps, movies, shows etc?
    I would prefer to have one account to input dollars which allows all the users (my direct family) to share and buy things.
    Can we all have different user ID's however share the same account?

    I'll try to help a bit.
    ITunes match space is different to icloud space. With iTunes match you get storage for 25,000 non iTunes purchased tracks and other than a limit for individual file size, there is no memory limit.
    You can turn match on individuallyon each device (I have it turned off on my iPod but turned on on my iPad and iPhone). When you turn it on then you get access to all the tracks, and in my experience any playlists I create have transferred over very well. I understand that some people have had trouble with playlists though.
    I'm not quite clear with exactly what you mean regarding cleaning up your library, but be careful about using Match for this. There is no guarantee that matched songs will be exactly the same version as your own copy, due to some mismatches, so you could find some problems there. Personall, I am cleaning up my library before matching, but I am rather particular about keeping my library the way I want it. If you aren't as fussed then match could be the answer.
    Hope that helped.

  • What is the better approach to populate Ref cursor into ADF business Component

    HI All,
    I have a requirement where I get the search results by joining more than 10 tables for my search criteria.
    What is the best approach to populate into ADF BCs.
    I have to go with Stored Procedure approach where I input the search Criteria and get the cursor back from the same.
    If I populate VO programmatically then the filtering at column level is a challenge.
    Anyone Please help me. Thanks in Advance.
    Thanks,
    Balaji Mucheli.

    The number of tables to be joined for a VO's query shouldn't matter - if the query is valid and fixed.
    Are you saying that you have logic to decide which tables to join to create the correct query?  I admit that would be a difficult thing to do, other than with a programmatic VO.  However, there are two possible solutions for doing this without a programmatic VO.
    Instead of your procedure returning a REF CURSOR, you can create an object type (CREATE TYPE) and a nested table of that type.  Then you have a function that returns an instance of the nested table.  The query in the VO is SELECT my_column... FROM TABLE(CAST my_table_function(:bind_variable) AS my_table_type).  You may have trouble getting the VO to accept this query as valid SQL, but it IS valid and it DOES work.
    Create a VO to be the master VO - it should have all the attributes that you intend to use, but the query can be anything, even a SELECT from DUAL.  Then create other VOs that subclass the master VO - one for each major variation of the query.  When you use the VO, use the data control for the master VO to create your pages, but change the pageDef to make the VO name a variable (with expression language).  Then you can set that variable to the correct child VO for the query that needs to execute.

  • What's the better use of mbp retina?

    hi guys, i have bought a mbp retina 15 last december, i see with battery health this stats:
    1) how is possible that my battery lose about 10% of his power in only 10month? it is normal? i don't have the apple care..so if i need to ask assistence i have to do it soon..
    2) i use my mbp at home and work, rarely outside so i use it often plugged in for a days, is better to use battery and recharge the computer when the battery is low or what? i calibrate the battery this month too. i read this and this is where is born my question http://www.wired.com/gadgetlab/2013/09/laptop-battery/?cid=12494134
    Ps: sorry for my bad english, i'm italian..thanks for all people will help me.

    http://www.apple.com/it/batteries/notebooks.html

Maybe you are looking for