What is the black oblong area on the opposite side from the camera for?

I want to purchase a case for my daughters ipod 5 and i want to make sure everything functions properly with the case installed. So what does the black oblong area on the opposite side of the camera lens do? What purpose does it serve, or what function does it perform?
Thanks -Brad

That is a plastic antenna cover that allow wifi and bluetooth radio waves to pass through. They can't pass through metal.

Similar Messages

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

iTunes manages your photos between the iPad and iPhoto on the iMac. If you have things set up correctly, then the photos will go to iPhoto for safe keeping and later use.

When I try to install CS6 Design and Web Premium from a disk I get this message "We are unable to validate this serial number..." What is the reason for this?

I purchased a disk copy of CS6 Design and Web Premium from a reputable seller last week and when I try to install it with the serial number I got it says "We are unable to validate this serial number for CS6 Design and Web Premium. Please contact Customer Support." What is the reason for this?
Is the serial number invalid?

Hi Ned,
Thanks for the suggestion. I eventually got in touch with Adobe Technical Support and it turned out that my Adobe Application Manager was not the latest version. They downloaded the latest version and installed it and that seemed to solve the problem. I was able to install my CS6 Creative Suite and validate the serial number. All seems to be going well at the moment.

What is the criteria for a post to show up in the top-level MacBook area?

I thought that the newest posts from the "Using your MacBook" section always showed up in the top-level MacBook section (here):
http://discussions.apple.com/category.jspa?categoryID=218
But I have noticed several threads that aren't showing up in the top-level area, even though they have new posts. Has the behavior changed recently??? What is the criteria for getting your post to show up in that area? It seems to be the place where you get the most answers...

The appropriate place for a question about the functionality of the Discussions itself is the Feedback About Discussions forum:
http://discussions.apple.com/forum.jspa?forumID=1076
A quick glance at this forum shows each of those topics have had at least 9 replies in less than 24 hours.
-Doug

I wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do?plz suggest

i wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do? plz suggest

The iPod touch has a very rudimentary camera. It has only a 0.6 MP resolution, no optical zoom, no flash, etc. There is no app that can improve this as it is limited by the hardware. So it is not a replacement for a digital camera (nor even for an iPhone whose camera has a 5.0 MP resolution.

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

Hi Guys,
What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
Business wants to run the report for any date in a past...
The report has two parameters:
As Of Date - the same as As of Date for the AP Trial Report
Trial Balance Run Date - the date when Trial Balance was run...
Conditions are:
TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Show_Flag = 'YES', where:
Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
There is a difference between the logic of my report, and the logic of AP Trial Balance...
Could you please advise what I'm missing?
Thanks,
Iana

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
Thanks,
Hussein

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

What is the procedure for a hard boot of my iPod touch 4th generation without itunes, and without computer, and without iPod data screen.?

What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.

You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

What is the best for me ? ?

Hello,
I'll buy a Mac soon and i'm confused as to macbook pro or macbook air ... i'm in college now and work with Photoshop and 3D max .. make some short movie .. So what's the best for me ?

You should also ask this in the MacBook Pro and MacBook Air forums. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/notebooks/macbook_air

What is the patfrom_id for linux_x86_64

HI I am trying to find out what is the platform_id for a database running on the linux_x86_64 platform? I do not have a database if this type available to me and need to know as we are looking to use data guard to migrate an existing 10.2.0.3 database running on linux itanium platform (which is platform_id=11).
I have queried the v$transportable_platform view but I am unclear as to which platform_id is for linux_x86_64?
Can anyone please let me know what that is or if you could tell me if it is possible to use dataguard in 10.2.0.3 to migrate from linux itanium to linux x86_64.
Thanks, any help is greatly appreciated.

user520056 wrote:
HI I am trying to find out what is the platform_id for a database running on the linux_x86_64 platform? I do not have a database if this type available to me and need to know as we are looking to use data guard to migrate an existing 10.2.0.3 database running on linux itanium platform (which is platform_id=11).
I have queried the v$transportable_platform view but I am unclear as to which platform_id is for linux_x86_64?
Can anyone please let me know what that is or if you could tell me if it is possible to use dataguard in 10.2.0.3 to migrate from linux itanium to linux x86_64.
Thanks, any help is greatly appreciated.Read this:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm#i72053
The first one. But you can try if you want. Obviously if you have problems, Oracle Support could say "it's not supported".
John

What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?

I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
So here are my questions:
1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
2) Will the front panel (or the software) tell me which hard drive has failed?
3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
Solved!
Go to Solution.

Hi exceptionalht,
It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
The front panel should show which drive has failed. If not you can check the web interface to find out.
That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
Mylenium

What Is The Criteria For Reloading objects and JSP Pages?

I have a JSP application that consists of many HTML, JSP & JavaBean files.
          Since I am in the middle of the development phase I am making lots of
          modifications to the code. I've noticed that much of the time if I recompile
          a JavaBean into a class file WebLogic does not reload the updated class.
          In my weblogic.properties file my servlet reload property is:
          C:/weblogic/myserver/servletclasses
          All my JavaBean class files reside in a sub-directory of that directory. For
          example:
          C:/weblogic/myserver/servletclasses/org/hhmi/award/JavaBean1.class
          How come these beans don't get reloaded each time? Is there a different
          WebLogic property I should use? What is the criteria for re-loading a class
          file anyway?
          Thanks in advance,
          Matt


BTW, I tried this in 6.1 and it does reload modified classes in
          WEB-INF/classes, but, sure enough, it results in ClassCastException's etc, for
          example:
          <%
          Foo foo = (Foo)session.getAttribute("foo");
          session.setAttibute("foo", new Foo());
          %>
          will result in ClassCastException if Foo was modified.
          So, if 6.1 tracks class modifications, then why doen't it trigger application
          redeployment? It can definitely be more convinient than touching 'REDEPLOY'
          file.
          Mike Reiche <[email protected]> wrote:
          > Make sure that your servletclasses and your jsp workingDir are NOT in your weblogic.class.path.
          > Pay attention to what Dimitri said.
          > Set your reloadCheckSecs=0 (check every time).
          > Set your pageCheckSeconds=0
          > Mike
          > "Matt Connors" <[email protected]> wrote:
          >>I have a JSP application that consists of many HTML, JSP & JavaBean files.
          >>Since I am in the middle of the development phase I am making lots of
          >>modifications to the code. I've noticed that much of the time if I recompile
          >>a JavaBean into a class file WebLogic does not reload the updated class.
          >>
          >>In my weblogic.properties file my servlet reload property is:
          >>
          >> C:/weblogic/myserver/servletclasses
          >>
          >>All my JavaBean class files reside in a sub-directory of that directory.
          >>For
          >>example:
          >> C:/weblogic/myserver/servletclasses/org/hhmi/award/JavaBean1.class
          >>
          >>How come these beans don't get reloaded each time? Is there a different
          >>WebLogic property I should use? What is the criteria for re-loading a
          >>class
          >>file anyway?
          >>
          >>Thanks in advance,
          >>Matt
          >>
          >>
          Dimitri

What is the black oblong area on the opposite side from the camera for?

Similar Messages

Maybe you are looking for