What is the boot sequence for an 2911 Router

What is the boot sequence for an 2911 Router. How long does it take to boot up from power being turned till it is passing traffic.

The default boot sequence should be as follows:
1) POST
2) BOOT-STRAP (locates the IOS)
3) IOS
4) Starup Config

Similar Messages

What is the multiplexing sequency for the DAQ cards?

I have a PCMCIA DAQ card (AI-16E-4). How does the multiplexing work on the that card?
In my setup I connect the same signal to channel 0 and channel 3 (differential termination). I notice that the acquisition of channel 0 is delayed by what appears to be half of the time increment between samples.
Does that sound right? I would have expected channel 3 to be delayed. Is there a way to know how the delay works?
Thanks,
Jerome.

Hi Jerome,
The multiplexer(mux) on your card will sample all of the channels in order. That is, channel 0 will be sampled first, and the channel 1, and so on. What happens is the mux will then take all of those samples and send that information to the ADC. With Traditional DAQ, the convert of all channels will be done as quickly as possible between sample clocks.
I hope this helps. Have a Great Day!
George

Boot Sequence for Sat Pro M70

Questions :
1. What is the factory default setting for the boot sequence for the Satellite Pro M70 ?
2. What is the procedure for changing the boot sequence during the POST phase of startup ?
3. What is the most "sensible" boot sequence, with & without an external FDD attached ?
Thanks
AlanCB

Jimi
Thanks for your reply.
Pressing the F2 key during POST takes you into the Phoenix Bios Setup Utility.
On the menu there are 5 pages of setup options and info, including a "Boot" page, which it would appear, allows you to change the Boot Priority (sequence).
Default setting is HDD>CD/DVD>FDD>LAN. Therefore it would seem that there are 2 options for changing the boot priority (sequence), with the Toshiba HWSetup Utility in the ControlPanel, as you indicated, being the other.
I did not check, but one or more of the boot devices appear to have sub-categories, presumably along the lines you have given below for the HDD.
I will check this later.
Pressing F12 during POST takes you to a screen which allows you to select the boot device (i.e. one time boot for the current bootup, presumably)

What are the best sequence settings for anamorphic?

sorry for the long explanation....
i have a project that was shot 16:9. my question is what is the best sequence setting to use so that when i export it to tape it will look right on a regular TV? on the FCP viewer it looks right with either setting. the difference is that if i choose a regular sequence setting ("anamorphic" unchecked), the video clips need to be rendered (it's green, but it will limit my ability to add effects and watch them without rendering). therefore i would prefer to use the anamorphic setting that does not need rendering. However, when i export the movie it comes out stretched (and only works with TV that has an anamorphic setting).
Can i edit the whole project with the anamorphic sequence setting and in the end copy it to a regular sequence without it becoming stretched?
i tried this on a little test sequence and it appeared to work, but i'm afraid that if the project becomes elaborate... well, last time i tried editing an anamorphic sequence (a while back, on FCP 2) i had to redo my whole film cut by cut with a regular sequence setting and then render it anamorphic so that it will look right.... it simply didn't work to just cut and paste the project onto a new regular sequence (could this have happened because i had many effects?). it came out stretched as it would when you merely uncheck the "anamorphic" box. has this been solved in the newer versions?

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

hi can anone answer the question i have asked ??
Ques: Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

goelAkash wrote:
now who is responsible ?? I think the apple care people are responsible as the phone was charging when they cleaned that charging jack. fault is at their end.
It doesn't matter that the damage doesn't appear to be related to the problem you're having. Once the phone is damaged, the warranty is void.
Forum etiquette note: you don't need to post the identical response three times.
Best of luck.

What is the boot up time for Mavericks using a 2.4 Ghz 13" MacBook Pro

What is the boot up time for Mavericks using a 2.4 Ghz 13" MacBook Pro

This will vary depending on what HDD/SSD option any system has been specked to, whether from apple or upgraded afterwards (depending on upgradable model)
I have a late 2011 2.4 i5 13" upgraded to 16Gb ram and a Samsung 840 Pro SSD and my install of Mavericks boots in around 15 seconds. This is actually about the same as my 2008 core2duo macbook booted snow leopard with a Samsung 840 (non pro)
You may find a system with less ram actually boots marginally quicker, but this would be marginal.

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

What is the best app for backing up my mac. I do publication work and need to save my work?

what is the best app for backing up my mac. I do publication work and need to save my work?

My answer does not have the black Apple logo but the hardearned black belt of (bad) experience.
There is one problem with TimeMachine. It can get corrupted out of the blue with no warning and it will not want to restore correctly (as an added "bonus" you get to find this out the "hard" way, when you need it most). Plus it takes ages for the data to be copied back, sometimes days. Haven't tried my 600gb backup on Mavericks but Mountain Lion had this knack of breaking Timemachine after a couple of months.
To back up my entire server is use SuperDuper. It mirrors the drive to an external one (usb for example) The cool thing is you can use that usb drive and start the OS X from it (by holding Alt when you hear the boot chime).
This way you have a working copy of your entire machine. You can even go to another mac and boot it from there. I literally ran the OS X Server in my company from a usb drive on an old MacBook Pro until i got around to fix the problems with the actual server machine.
This has saved me twice already as the Hitachi drives Apple uses, tend to die like clockwork after 4000-5000 hours of use with no warning.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
PS. As a sidenote... SSDs are more reliable than a normal HDD (not to mention faster) I can't stress this enough, my Server is on two SSDs now. I can't tell you how stress free the setup is, it doesn't feel like a computer but more like a router, it just works... forever. After two years with SSDs my server has had two days of downtime and their health is at 97%, they will literally last 100 years with normal use. I'd go so far as to recommend you buy an SSD and move your old HDD to an external enclosure and use that as a usb backup. (for SSDs i use Plextor / Lite-On M3s (older) or the M6s (newer))

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.

You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
This has worked fine with MobileMe with only a couple of minor glitches in the past.
Any experience doing this the "right" way?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

HT201991 What is the character limit for length for video or song reviews?

What is the character limit for length for video or song review?

One other thing I found... It was still doing the spinning clock and locking up, but it took a while after boot for the problem to crop up.
I pulled the media card and found that there was a media sync folder under Blackberry\System that had some files in there that were pretty big. The artwork file was over 150MB and some other files were largish.
I deleted the entire media sync folder and now it seems to be behaving itself. No more spinning clock and it seems to be slowly returning to normal. (Besides all the messages it deleted during the whole process)
If anyone else runs into this I would say you should clean the folder off the media card along with disabling the sync. Seems the BB still reads that folder and processes it if present.

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

What is the best program for playing games,dics,3d settings such as "groove setting"

what is the best program for playing games,dics,3d settings such as "groove setting"?

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

What's the best fix for a slow computer?

What's the best fix for a slow computer?

What model computer? What are your primary uses and apps?
First thing anyone can do is replace or upgrade the system boot drive to SSD. Makes a very nice improvement.
How new or old is it? What version of OS X is it running?
Maybe it won't run faster but could run better with more RAM.
Take a look at all the tabs in Activity Monitor. If not on the Dock, go into Applications/Utilities and open it and keep it on the dock. Can tell you what is using your processor the most, RAM usage, disk and network I/O.
Don't install things that aren't needed. That can be counter intuitive to some but 'less is more' and some just really pull a computer system down. Security programs, "clean up programs" and others.
General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form

What is the boot sequence for an 2911 Router

Similar Messages

Maybe you are looking for