What is the business content in R/3 side

may i know wat is the business content in R/3 side

Hi
To Install business content on R/3 side you need to use tcode RSA5.
To know more about business content read this-http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Regards
Pradip

Similar Messages

What is the Business Content Extractor for HRP1000-OBJID ?????

Hi all,
    I want to extract the HRP1000-OBJID, HRP1000-SHORT, HRP1000-STEXT from
R/3 in to BW. The table name is HRP1000 (Info Type 1000 DB Table).
    What is the Business Content Extractor for these fields, please ?
    Thanks in advance.
Best regards.

There are a lot of datasource based on that table; chack this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e2/72ee3da7138e5be10000000a114084/frameset.htm
Hope it helps.
Regards

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

What is the business processflow in sap xi ?

hi experts send me xi business flow.
Hi Experts
Give me the answers for this questions
what is the business processflow in sap xi ?.
where we can implement sap xi ?,
what is the prasent sap implemented compnay ladscapes in sap xi ?
what are the different technical systems are there in the landscape. (please send me the examples ).
What is your file size and how many records are there in your file ? which idoc your using ? what is business requirment for that senario ? in your project how many interfaces are developd? (Expample plase ) what is your role on the project ?
Edited by: g.praveen kumar on May 29, 2008 5:45 PM

what is the business processflow in sap xi ?.
Check this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f79be190-0201-0010-96b9-f00ef2ac00d
Understanding message flow in XI
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
what are the different technical systems are there in the landscape.
The technical system describes the physical view and the business system the logical view, respectively.
So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
Tech System - Holds the tech details like installation no, db instance.
Technical Systems are of following types:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
1.)WEBas java,
2.)Standalone JAVA
3.)Third party
4.)Web as ABAP
1) Web AS Java
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
2.)Standalone Java
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
3) Third party technical sytem
It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
All those machines that comes under non sap, belongs to the third party.
4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
What is your file size and how many records are there in your file ? which idoc your using ?
The file size that your server can process depends on various different aspects like the server hardware sizing, total available memory form both Java and ABAP side, the kind of interfacing you are trying to achieve, if your interface needs a complex mapping etc. Although there is no correct picture on theoritical Max file size, it will depend on the specifics of your landscape.
I personally feel that, processing a 2 GB file is not a good idea as the message when converted to XML its size multiplies atleast 3.5 times to 7 times, which gets persisted at various stages of logging that the system does. You may want to consider other options like splitting the messages into smaller chunks, having no or minimal mapping and configuring the recordset per message property.
Personally in one of the implementations we have had to process a Max file size of 350MB which gets processed once a month and that too during non-peak working hours.
SAP Network Blog: SAP XI acting as a (huge) file mover
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
SAP Network Blog: Night Mare-Processing huge files in SAP XI
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
Selecting an IDOC depends on your requirement.
example: if it is purchase order then the idoc would be orders.orders05
if it is invoice,idoc would be invoic.invoic02.
Reward points if this helps
Regards
Pragathi.
Edited by: Pragathi on May 29, 2008 7:00 PM

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How to install the standard Cube 0PM_C09 in the Business content in BW ?

Hi ,
Experts,
Standard Cube *0PM_C09 is not available in the Cube.
Standard Cube 0PM_C09 is not exist int the Business content.
Suggest me what to do !!!!!!!!!!!!!!
Thanx.
Asit

Hi Asit,
Most probably you need to update the BI_CONT component in your system via SPAM.
Go for the latest SP available.
Regards,
Srikishan

Error while activating the Business Content

Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.S

And also check whether there are any dumps in ST22.
Khaja

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths 10,20,20 (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths 10,20,30.(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

What are the business scenarios used in plastic industry

Hi Experts,
Could you guys please tell me what are the business scenarios (in sap sd) i should use while implementing in plastic industry (as if someone already worked on implementation project at plastic industry).....
As per my knowledge i would use:
MTS
Batch management
Third party etc....
but in addition to these (if anyone already worked on the implementation project in plastic industry...then what are the business scenario used for......please suggest.....)
If have any idea please suggest........ would be a great help.......
Thank you in advance...........

it depends which part of the value chain you are working at e.g. your company is B2B, supplying ingredients to Plastic industry manufacturer or you sell to wholesellers.
Below are the processes you - may - do in Plastic industry -
- Inter-company stock transfer
- Subcontracting
- Contracts
- QM inspection during delivery process
If you require business scenario descriptions (in brief) for the above processes, then please convey.
Edited by: Typewriter on Jul 11, 2011 11:30 AM

Errors while transporting the Business Content

hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
   Start of the after-import method for object type R3TR IOBJ (Activation Mode)
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manicks

hi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07

What is ECC6.0 and what are the business benefits by upgrading ?

what are the Business Benefits of upgrading SAP R/3 4.7 to ECC6.0 , can some one explain in brief..?
Thanks and Regards,

Hi,
Refer to about ecc 6.0.
Regards
Bala

What is the business content in R/3 side

Similar Messages

Maybe you are looking for