What is the button on the Wrt110 router for?

Hello, I have the wrt110 router. I see there is a button on the top, where the led lights are. What is that used for?

That button is an Wi-Fi protected button. If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless security for your wireless networks. If you wish to know more information about it then you can refer to the link mentioned by GV.

Similar Messages

  • What is the best router for mugs connectivity

                       i am looking for best networking institute in India, for optical networking please suggest, have heard about Networkers Zone (http://networkerszone.com/) , however needs suggestion and what is the best router for mugs connectivity.

    For training on the Cisco Optical I would rrecommend Fastlane http://www.fastlane.si/ they would be able to fullfill your training requirements either in India or at another location even at the Cisco Factory in Monza, they can tailor courses to your specific requirements and also do switching and routing courses too, I have know one of the instructors for over 10 years they are very good.
    As far as recommending the best router, that all depends on the application, not what you mean by mugs connectivity, I know what mugs is in English but not sure if thats what you mean or if it is an acronym for something else   in any case if you post in the router section of Net-Pro with your specific requirements I'm sure someone woule be able to help/advise accordingly.

  • What is the cheapest route for replacing an iphone?

    Super glue dripped onto my iPhone running in around my home button. It works half the time, when it don't it just keeps bringing up Siri.
    I just got my phone bill lowered with the new rates so I really do not want to be making payments on a new phone. I heard it will cost $200 to get it repaired at an Apple store. Is that correct? I looked on eBay for an iphone but I might be buying more trouble. What is the most economical route.  I've been looking on AT&T site it seems like they got you coming and going. What to do?

    Taralynn7 wrote:
    If I do an out of warranty replacement at Apple, will I have to take the same iphone I brought in? 
    Not sure what you mean by this.

  • What is the newest router for fios in 15/5 speed

    i have a MI424WR(rev e). what is the newest one?

    There are rev f and g.  G is pretty much only available to those with the 150/35 or higher packages.
    F is also fairly rare.

  • What is the best Router for Gaming?

    Alright, at the moment I have a "G" wireless router, which I bought it for pure gaming reasons, well I am thinking about upgrading 'cause I am having some lag and poor connections and I want to enhance my connection for online play.  I won't lie I am a addicted hardcore gamer, so I need a good router! ^_^
    Well I been looking at this WRT330N , which this one interests me a lot!
    http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1166859632665&...
    I know it's about $200 but I am willing to spend the money if it's worth it! If anyone can share anything about this router or a cheaper and better router please do so!

    I started shopping for a wired router to handle a claimed higher speed from my cable provider. I want something that runs at full incoming wire speed. I did not think I would care a lot about special gaming features. One of the techs at work uses the GamerLounge which is made by D-Link and he loves it for gaming. It runs a little over $100. It has a number of features to help automate the setup for gaming and to help debug gaming connection problems. I do not know if Linksys makes anything that is specifically targetted at gaming. You might want to read the various hardware reviews and decide which features you think will be important to you. Linksys has product documentation that describes the products but you will have to understand the terms used in the brochures to decide which device might be best for you. I have a Linksys for wireless support and it is rather slow compared to a wired connection because I run encrypted. If you want to run games on wireless, then published benchmark results may be the number one item on your list. Some routers may have much faster wireless performance than others. Cost will probably be a factor but more expensive does not always mean better. I have a WRT54G V5 and Tom's Hardware has a review discussing some of the serious limitations in V5. I stopped using it as a main router and went back to an old 10 Mbps wired router connected to the cable modem to get better performance. The WRT54G V5 sort of works when used as a wireless access point but Windows file and printer sharing do not work. So ... it all depends on which features are most important to you. Absolute best case is to talk with a friend who has a working setup that they like. Then you can decide if their priorities for choosing features match your priorities.

  • What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

    My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC.  My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service.  This came with a new modem/router combo made by Cisco and is model DPC3825.  Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service.  Should I be setting the Cisco modem/router to Bridge mode or the TC?  Should I have Shaw disable anything?  Any insight is greatly appreciated.

    Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
    Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
    Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
    Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
    Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

  • Whats the best router for multiple Wireless-G

    I just want to know whats the best router for running multiple wireless-G with some things wired and some wireless also sharing on the network and gaming with a good internet connection whats the best router ?
    Good Speeds
    Good Range
    Multiple online sharing
    Online Gaming
    I think everything is wireless-g
    Things i have on the router
    Linksys Nas200  - wired
    Laptop  - wireless
    Desktop  - wired
    2 Xbox 360's  - 1 wired and 1 wireless
    2 Sony PSP's  - both wireless
    Soon a wireless printer or a linksys printer server
    Message Edited by Sas101 on 11-12-2007 07:30 PM

    As you posted it sems that you need good router for wireless connectivity .....
    You can go for any N router lile WRT300N.... WRT350N ..... WRT150N ....
    They will give you excellent performance for the connection you require.....

  • What is the Ok-code for Exicute button?

    what is the Ok-code for Exicute button?

    Hi,
    There are 2 ways to find an ok-code.
    1. Click on the button you need, keep the left button of the mouse pushed, and push 'F1' on your keyboard. SAP will tell you the ok-code for the button you need.
    OR
    2. Use transaction SHDB and simulate your transaction.
    Please reward if it helps.
    Philippe.

  • What is the constant name for Change layout Button in ALV Grid ABAP Objects

    Dear All,
    I have one query please help me.
    what is the constant name for Change layout Button in ALV Grid ABAP Objects.
    With Rgds,
    Babu

    Halo Vinod,
    The consant name is cl_gui_alv_grid=>mc_fc_current_variant.
    Regards
    Arshad

  • What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.

    What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.  Its a VoIPo device. The cable modem is connected to the VoIP WAN port and the LAN port on the device feeds the Airport Extreme.  The VOIP is working fine, and my Mac are getting 10. addresses from the Airport Extreme.  But I do get confict messages and lose my connection periodicaly.  Looking for help.

    Its a VoIPo device.
    Per chance, is this device the Grandstream HT502?

  • What's the best router ti use w/ my miniipad..having connectivity issues?

    what's the best router to use w/ my mini-ipad...i'm having difficulty connecting to wifi. my old ipad connects fine

    You need dual band adapters also for getting benefit of 5Ghz band(and N standard receivers to get benefit of N standard). So i think WRT350N will be next to best for your network, or you can get WRT600N and so that in future if you get adapters like WEC600N, it would work best with them.

  • What is the boot sequence for an 2911 Router

    What is the boot sequence for an 2911 Router. How long does it take to boot up from power being turned till it is passing traffic.
     

    The default boot sequence should be as follows:
    1) POST
    2) BOOT-STRAP (locates the IOS)
    3) IOS
    4) Starup Config

  • What is the best app for storing all passwords in a secure area? osx snow leopard

    What is the best app for storing all passwords in a secure area? osx snow leopard

    Keychain is nice, but I prefer to use 1Password. It's got a nice user interface, and does what I need. It stores passwords, notes, identitiy info, credit card info, application registration numbers, saves hardware information such as your router settings, and more. It also has a secure password generator. There's an extension that keeps a button in the browser toolbar for Safari, etc., so you can submit your info (password, credit card) with the click of a button, and without having to type the information in through the website you are visiting. It also pays attention when you are signing in to a website, and asks you if you want to save the login to 1Password. Once you get them all entered, it's a big timesaver.
    http://itunes.apple.com/us/app/1password/id443987910?mt=12
    The link above says it is for OS X 10.7 and up, but if you go to the developer's website (link below), it says it works with OS X 10.6 as well. You can also download a 30-day demo from the link below.
    http://agilebits.com/onepassword/mac

  • I am using my iPhone 4s personal hotspot as the internet router for my notebook. However, I am gtting the WEB SITE IS BLOCKED BY NETGEAR FIREWALL. I've deleted some other wifi connections I had before, had system restores, clear cahes and cookie. FAILED.

    I am using my iPhone 4s personal hotspot as the internet router for my notebook. However, I am gtting the WEB SITE IS BLOCKED BY NETGEAR FIREWALL. I've deleted some other wifi connections I had before, had system restores, clear caches and cookie. Still, I failed. Whenever I tried to access FACEBOOK, it's still blocked so I still had to use https:// or tl-gp. please help asap.

    Well, aren't you all that and a bag of chips!!!!
    Oh what a relief!  What a RELIEF!  
    That just cleaned up my life.  And Cranky Boy is actually smiling!!!
    Houston, we've got dots AND BARS!!!
    P.S.  All my firware and software are always current.  If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
    P.P.S.  Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!!   Who knew?
    Thank you so much, m'Lord.  I am in your debt.  What would you have me do?
    Patti in Tucson AZ

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

Maybe you are looking for

  • My mac no longer will play videos in itv player yet the windows laptop plays them no problem

    I've been watching ITV Player for months on my MAC and now, all of a sudden, all i'm getting when i try to play a programme is the black screen with the 'loading' circle that remains on until i close the window. Out of curiosity, i switched on my old

  • Agents in OBIEE 11g

    Hi Experts, I am trying to create a agent in 11g. And deliver the report on to the phone/Handheld devices. Can some one help me with this? I would appreciate the help. Thanks, Kumar Edited by: 807167 on Nov 30, 2010 3:28 PM

  • The IDOC INBOUND function is locking an object

    Hi ,        I have created a wrapper bapi around IDOC_INPUT_SHPMNT , this is because i need to change the shipment using a BDC. No the problem is that once the control comes out of IDOC_INPUT_SHPMNT the locks are still maintained on the shipment.Now

  • Trying to center frame, but affects my Robot method

    Hi, I am using a robot to take a screen shot of the users screen, which will then display on top of the screen with a piece of text printed. This works fine, but when I try to center the frame that holds the information the background is replaced wit

  • Printing, Display, ICA and keyboard issuers

    Hello I'm facing several issues with a new SGD 4 installation on a SuSe Enterprise Server 9. - Printing : some jobs get "stuck" and are not printed. If I try to print another document, tarantella tells me it's ready to print (while it's not actually)