What is the Category field for and how do I edit it?
In the iTunes music list, there is a category field. However, I do not see it in the get info window. Not surprisingly, although the category field shows in my iTunes music list, none of my songs have anything entered for the category. What is this field for and how do I edit it? Thanks.
The only items I have that show a category are some iTunes U downloads.
You can see a list of iTunes U category and subcategory codes and associated names here: http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUintheiTunesSt ore/chapter13_section3.html
Similar Messages
-
What is the conditional operator for AND, OR .....?
what is the conditional operator for AND, OR .....? in ABAP language...
AND, OR .. & is not accepting or recognising.
Is these feature available in abap ??? if yes, how to use?
thanks...
shivaHi,
Conditional operator for AND and OR are same AND and OR.
A logical expression consists of comparisons (see expressions 1 to 4 below) and/or selection criteria checks (expression 5) using the operators AND, OR and NOT , as well as the parentheses " (" and ")".
The individual operators, parentheses, values and fields must be separated by blanks:
Incorrect:
f1 = f2 AND (f3 = f4).
Correct:
f1 = f2 AND ( f3 = f4 ).
NOT takes priority over AND, while AND in turn takes priority over OR:
NOT f1 = f2 OR f3 = f4 AND f5 = f6
thus corresponds to
( NOT ( f1 = f2 ) ) OR ( f3 = f4 AND f5 = f6 )
The selection criteria comparisons or checks are processed from left to right. If evaluation of a comparison or check proves part of an expression to be true or false, the remaining comparisons or checks in the expression are not performed.
All data objects that can be converted among each other can be used as operands for logical expressions.
Check if u are using the AND or OR operator this way.
IF f1 AND f2.
ENDIF.
In this case it will throw error. Here it act as relational operator.
Regards,
Prakash -
What's the FPGA step size and how to calculate it?
Hi there,
I inherited an vi with problem in it. It's basically reading the binary file then display it. So the vi reads the binary file by using Read From Binary File, the output data from this function then sends to FPGA after multiply a number (32767/10). But unfortunately I got a wrong output. The final output value for some reasons looks got attenuated. People told me maybe it's related to the FPGA step size, so I want to know what is the FPGA step size and how to calculate it. Can someone answer my questions here?
Thanks in advanced!!!Hi Weny,
It sounds like you are trying to find out the output resolution of your FPGA module. It would be helpful if you provided what FPGA module you are using in your tests so we know what information to provide. For instance, the R Series Manual provides information on how to calculate the required DAC output code to generate the desired output voltage. You should also try to keep the accuracy of your device in mind. The analog output signal you are generating will be subject to gain, offset, and noise errors. You can use the specifications sheet (such as the R Series Specifications) of your device to determine what accuracy your board will have. The specs also provide information on the resolution of the board. You can search ni.com for the manual and specifications for your particular device if you are not using R Series.
Regards,
Browning G
FlexRIO R&D -
What is the Weigh Bridge System and How to Implement
Hi All,
I have a requirement from a client to interface with Weigh Bridge systen and to generate the delivery order record.
Could someone explain to me what is the Weigh Bridge system and how it is being implemented in SAP.
Thank you!
Regards,
YvonneHi,
this is to inform you that,
this weigh bridge concept is very simple its an interface with other or software which the company which is implementing SAP.
for EG:
my company is cement company in production plant you will be getting raw materials in tons and out going finished products will also be in tons.
in that plant there is weigh bridge where in flow of materials will be wieghed and if it matches to the paper which is getting along with then he ticks OK other wise NOT.
the above case applies to out going of goods in tons also.
regarsd,
balaja -
What is the package mzm.stuhjljp and how can I re download it ?
What is the package mzm.stuhjljp and how can I re download it ?
I opened it and a Lion icon went to apps folder, then I deleted the
package folder and package,because I did not recognize what it
was and after I found out I need the whole package stored
someplace else beside my download folder.Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1. Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2. Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3. Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic -
What's the Commitment item? And how to use it?
When I create a G/L account by FS00 I need to input a Commitment item.
But I don't know how to use it.
Can you tell me what's the Commitment item? And how to use it?
Thank you very much.
Moderator: Try pressing F1 or going to help.sap.com>>In SAP XI / PI, WS adapter is not thier frm standard SAP.
Are you sure about this?
WS is a standard adapter shipped along with PI 7.1 installation.
Quote from help.sap.com
Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
Refer:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
If you are not sure about what you are saying, it is better not to say it. -
What are the benefits of Yosemite, and how do I use them?
I upgraded to Yosemite on my iMac. I can see it looks different, but I don't know what the benefits are or how to access them. I only upgraded because I have been told that I should use the newest version of software, as that is what is being maintained and improved. Is there a site or a document somewhere that will describe the changes in Yosemite, and how to utilize them to the best advantage?
The easiest graphical way I would recommend is to search for an example "whats new in yosemite" on youtube, I am sure you will find lots of videos on that.
-
According to iTunes I am using approximately 20.35GB of the available 27.32GM of memory, leaving about 7GB free. Of the used memory, about 7.9GB is labeled "OTHER". Making the same measurement on my iPad Air, only 3.9GB is labeled "OTHER". Why am I loosing so much memory capacity and what do I do to mitigate this problem?
This is having a significant effect on using my iPhone for recording Video interviews which in some cases constitute two to three hours of video. I need to be able togged the "OTHER" memory space so I can do more than one video recording during a session. Lowering the "OTHER" category to 3.9GB, the same as the iPad Air, would make it possible to record two or in some cases three videos before having to offload them to the MacBook Pro for editing in the evening.Charliebear88 wrote:
No. He mentions freeing up storage on the iPhone, Mac, and hard drive. I'm looking for just the iPhone, and his suggestion for that is downloading some program.
No, it's not, if you would actually read the linked information like I said. There is plenty of information in this link about how to reduce or eliminate your 'Other' data without using third-party programs or procedures:
http://appducate.com/2013/01/reclaim-other-storage-space-on-ipad-iphone-and-ipod /
• Delete Browser Cache
• Delete Mail account and re-add
• Delete Text Messages
• Empty out the Reading List
• Delete iTunes Backups
• Backup to iCloud instead of iTunes
• Restore as new then restore the backup
• Restore as new, but don't restore backup -
What is the table field for PO releaser in R/3 (4.7 Enterprise)?
Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hwHi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE Release Purchase Orders
BAPI_PO_RESET_RELEASE Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul -
What is the Other yellow stuff - and how do I get rid of it?
I have .18 audio, .02 photos, .01 apps and .21 OTHER? I dont know what that is or how to get rid of it. I saw where some responses said to go to the back or restore factory settings. My question is on what and how? I am very computer illiterate and getting frustrated! Now it is not much, but I don't want it to cause a problem down the road. Also, if my itouch is a 8G, why does it show only 6.5 GB as the capacity? Thanks for any help!!
To reduce "other" sometimes a restore from backup works but many times a restore to factory defaults is required. I would not be concerned until ti gets to 1 GB though.
The difference between the 8 GB iPod total capacity/storage capacity and 6.5 is due to the iOS taking up some of that difference by a lot of it is du to the difference of how BG is calculated. See:
http://wikimediafoundation.org/wiki/WMFJA051/en/US?utmmedium=sitenotice&utm_campaign=20101223JA056&utm_source=20101223_JA028C_US&count rycode=US -
What is the pop-up page and how do you disable it?
When I read through documents in Acrobat XI, a small, miniature version of the page pops up on the upper right hand corner. It is surrounded by a dark gray border with a white box inside that shows me where I am on the page, and the message "page X of Y" appearing at the bottom. What is this? I searched the manual (the Help and Tutorials document) in vain to find out what this is, I've Googled it, Bing'ed it. No dice. Hovering my cursor over the image does not reveal anything either. What in the heck is this thing called, and how do I disable it? It is very distracting and not very useful.
I am aware that you can turn it off by clicking on the "x" (which is barely visible). However, this is only temporary. When I scroll down to the next page, the box pops up again. So I have to click if off on every page. What I am looking for is a way to completely disable this function so I don't have to deal with it to begin with. Thoughts?
-
What is the output of Maya and how does Java use it in animation.
What type of software is used and what input and output files are created in the animation process?
From what I read:
Maya is used to create polygon structures, perform rigging, and it attaches surface textures which are made in Photoshop. Then Maya creates key images or positions of the animation. Next Maya exports an image and a data file to do the neccessary transformations. Finally, Java uses the image and the data file to paint the images and their position based on the game logic's use of the data file.
What have I missed or described wrong?
I also need more clarity on the input files to Java and how Java stores and uses these files. The use of Maya images and files seems different. Is Maya or Java doing the transformations or are they both doing them? How does this work?
Thanks for your help
JonThanks for the explanations. What this means in my situation is that tags are an unnecessary way of spending a lot of time making my file system more complicated, without adding any value whatsoever. Without tags, I can find any of my 3,000 files with a few clicks. (On my computer, Spotlight has cobwebs. I very rarely need it, but it's wonderful when I do.) Now that I know how tags work, I can ignore it.
A human being can only perceive a quantity of seven without counting or grouping; hence we arrange things in structures to keep the number of entitites low on each level. You don't need to count three objects to know that they are all there, but you do need to count twelve objects. Which is why Home Alone was believable. We sort screws and nails in jars and toolboxes have compartments. Even the grocery store has a hierarchical arrangement. You don't find steaks in the bakery section, or breakfast cereal in the produce department.
Some people aren't organized, and that's not a bad thing, but no folder, no tag, and no group is going to change a fundamental personality characteristic.
Thanks everyone for showing me that in my case, there's no point to tags. That saves me a lot of time. -
What is the default identity store - and how can I set it?
Hi,
I'm running Webcenter on WLS, and using WLS and JPS for the authentication of users. On the WLS Console, if I go to Security Realms -> myrealm -> Providers, I have a list of four different providers.
If I understand correctly, these four providers are my identity stores. How can I set one as the 'default' identity store? Or see which one is currently the default?
The reason I'm asking is I have the following code in Webcenter to create a new user in the Active Directory:
// Get the default identity store
IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
// Get the user manager object
UserManager usermgr = idStore.getUserManager();
usermgr.createUser(loginName, password.toCharArray(), propertySet);So I have a utility Java class which gives me the "default identity store". Now I want to change the WLS configuration so that the Active Directory in which I want to create new users is the "default" identity store.
Thanks in advance for any help,
LudovicHi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1. Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2. Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3. Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic -
What is the original expand function and how to compile this
https://onedrive.live.com/redir?resid=E0ED7271C68BE47C%211002
i lost the original file, and when i search Expert F# 3.0 and download again, it do not include the expand function
i only have the version i last edited and test, but it is the original version
i want to edit expand function for 2 valued logic and 3 valued logic
1 0 -> 1 means a+0 = a
0 1 -> 1 means 0+b = b
1 2 2 -> 2 means a+op2(b,c) = op2(b,c)
let Expand v e =
let rec expan v = function
| Num num -> Num 0M
| Var v' when v' = v -> Num 1M
| Var v' -> Num 0M
| Neg e -> expan v (Prod ((Num -1M), e))
| Add exprs -> Add (List.map (expan v) exprs)
| Sub (e1, exprs) -> Sub (expan v e1, List.map (expan v) exprs)
| Prod (e1, Add(e2)) -> expan v (Add (List.map (fun x -> Prod(e1, x)) e2)) //Add [Prod (expan v e1, e2); Prod (e1, expan v e2)]
| Prod (Add(e2), e1) -> expan v (Add (List.map (fun x -> Prod(e1, x)) e2))
| Frac (e1, e2) -> Frac (Sub (Prod (expan v e1, e2), [Prod (e1, expan v e2)]), Pow (e2, 2M))
| Pow (e1, num) -> Prod (Prod(Num num, Pow (e1, num - 1M)), expan v e1)
| Sin e -> Prod (Cos e, expan v e)
| Cos e -> Neg (Prod (Sin e, expan v e))
| Exp (Var v') as e when v'= v -> e
| Exp (Var v') as e when v'<> v -> Num 0M
| Exp e -> Prod (Exp e, expan v e)
expan v e
computing nightmarei lost the original file
This is what source control systems are for, especially off-site ones like GitHub or BitBucket.
That code looks like Listing 12-11, where the outer function is called `Differentiate`, and the inner `diff`, because it is computing differential of an expression. Your rename makes little sense save to obfuscate the intent of the code. -
What are the F keys for and what are the insert and delete line shortcuts?
I have always had a full keyboard and I'm really missing a few shortcuts I previously had that I used mostly in Quickbooks...mainly using the Control insert combination for inserting a line in General Journal and also the Control delete for deleting a line. Is this just an issue with Quickbooks on a Mac? I hate to say it, but during a period of insanity and persuasion by my accountant, I...GASP, went to a PC from a Mac and now I'm finally back in the family. I've forgotten a lot of what I'd learned in the last several years. Do the F keys have these capabilities or is there some other way? Thank you for any assistance.
Look carefully at the F keys you will see that F1 and F2 will darken and Brighten yur screen F 10 11 and 12 will Mute turn down and turn up your sound.F3 will minimise the screen F4 goes to all your Applications installed.
You need to fool around and see what they all do to help minimize work
Cheers
Don
http://support.apple.com/kb/HT1343
http://macmost.com/mfm/mastering-keyboard-shortcuts.html
Maybe you are looking for
-
Creation of reports using JasperReports
Hi all! I have a problem with developing Java code for printing reports, by using JasperReports tool. I'm trying to create report by using next peace of code (you can found it also on http://ensode.net/jasperreports_intro.html) package myReport; impo
-
I tried to download the latest upgrade and I got a message telling me "The application or DLL ProgramFiles/CommonFiles/Apple/Applie Application Support\ApplePushService.dll is not a valid Windows image. Please check this against your installation dis
-
XFDF file is not created in C drive of the System.
Hello, I am developing a plugin in acrobat professional 9.0 which exports all annotations in xfdf. I am using exportAsXFDF, through trusted function. The code works fine, except that XFDF is not created in C drive(C:\) of the system(WindowsXP). Plea
-
Safe Mode breaks Classic Theme Restorer layout
I use Classic Theme Restorer to restore the customisability that was lost with the new UI introduced in Firefox 29. Recently, I had to use Safe Mode, and upon leaving Safe Mode, the UI broke; the address bar was missing. My address bar is placed in t
-
Picture turns upside down after being taken
What could cause my phone to turn my pictures upside down after it is taken? As I am taking the photo it is the correct way but when it transfers into my camera it rotates to be upside down.