What is the cause of my MBP coming out of sleep to sound a long low tone and repeat every 5 to 7 seconds?
I put my MBP to sleep with: Paralells, Safari, Sophos, LittleSnitch and smcFanControl running as they are suppose too.
Two hours later I went to wake my MBP and I get a long low tone and repeat it was repeating every 5 to 7 seconds. I had to do a hard power down in order to reboot or get any type of response from the MBP...
Does anyone have any ideas of what this is. This machine is not even 30 days old yet & I am a new comer to the world of MBP's.
Thank you all for the input regarding grounding. This was the problem, but not from a power outlet. The Sure 8900 microphone is has a 3-prong "balanced" connector at the microphone, but then is adapted to 1/8 inch connector so that it will fit the "mic" input jack on the iMac. The result - a conversion of a balanced to unbalanced signal. After describing this to a technician a a local electronics store, he immediately said "You can't go from a balanced to an unbalanced input and not have grounding noise. The reason: one channel shares the ground - allowing the AC clipping to occur.
Solution: The 8900 mic comes with a 1/4 inch adapter making the mic "balanced" if connected. Put the 1/4 inch input over the 1/8 inch input, PLUG THIS INTO A USB mixer and into the USB port- problem solved - no more buzzing AND BETTER RECORDING QUALITY!!!
iMac G5 Mac OS X (10.4.4) intel Duo Core processor
iMac G5 Mac OS X (10.4.4) intel Duo Core processor
Similar Messages
-
What does the icon with an arrow coming out of a phone mean?
i have had my iphone 4 for a while now, and recently when i was abroad an icon appearing on the top bar which looks like an arrow coming out of a phone. does anyone know what it means?
You can find the icons and their menings in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
my ipod 3rd gen. touch screen is unresponsive, cant slide to unlock or enter passcode to access ipod. What is the cause? how do i fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefinedEvery time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined -
What is the cause of this error message?
What is the cause of this error message?
What is the solution to this problem ?
ThanksFirst part of your question:
Error Message
%CFT_API-3-CFT_ERRMSG_NO_MEMORY: [chars] [chars] [dec]
Explanation
The system was unable to supply the requested memory for flow processing to continue
Recommended Action
Reduce other system activity to ease
memory demands. If conditions warrant,
upgrade to a larger memory configuration.
link:
www.cisco.com/c/en/us/td/docs/ios/system/messages/guide/sm_cn02.pdf
Pretty generic, but its a start, the process in question is cft_flow_lookup.
This may be an indication of a deeper resource issue. -
What is the cause of the Spinning Wheel of Death (SWOD) and how can we fix it?
What is the cause of the Spinning Wheel of Death (SWOD) and how can we fix it?
I get the SWOD using Safari, Mail, Google chrome, Firefox, Mathematica, and other programs. This cannot be a browser plug-in issues as other forums suggest. I suspect a windows process at the root but I don't enough to know how to trace. Does anyone know what's causeing this epidemic?I'm having a similar problem. Someone PLEASE HELP!
I'll start with just an example of what I've been facing. During the composing of this post, when I switched from Firefox to Word, I had to wait 60 seconds before the spinning wheel stopped and I got a cursor. I then copied one set of Etrecheck results, switched back to Firefox, hit Command-v to paste and had to wait 45 seconds or so for the spinning wheel to stop. And the paste operation didn't paste until I hit Command-v again (with no wait this time).
Here's what I've done:
I tried three times to run a scan with avast! and all three times the scan was unable to complete.
I restarted holding down Command-r and it found and fixed many permissions, but found no problems with files.
I ran Etrecheck in a "Safe Boot" and in a normal startup and there were two things that were tagged as "[failed]" in the normal startup:
Launch Agents: [failed]com.logmein.LMILaunchAgentFixer.plist Support
User Launch Agents: [failed][email protected]
I apologize for taking up so much space, but here are the results from both Etrecheck runs:
EtreCheck in Safe Mode
EtreCheck version: 1.9.12 (48)
Report generated July 24, 2014 3:38:40 PM CDT
Hardware Information:
MacBook Pro (17-inch, Early 2008) (Verified)
MacBook Pro - model: MacBookPro4,1
1 2.6 GHz Intel Core 2 Duo CPU: 2 cores
5 GB RAM
Video Information: GeForce 8600M GT - VRAM: 512 MB
Color LCD 1680 x 1050
System Software: Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:12:35
Disk Information: WDC WD1600BEVS-00VAT0 disk0 : (160.04 GB) disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (27.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Kernel Extensions:
[not loaded]com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) Support
[not loaded]com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[not loaded]com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded]com.devguru.driver.CDFree (0.1.8) Support
[not loaded]com.devguru.driver.DevGuruVsp (0.1.8) Support
[not loaded]com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded]com.parallels.kext.prl_usb_connect (7.0 15107.796624) Support
[not loaded]com.vmware.kext.vmci (3.1.4) Support
[not loaded]com.vmware.kext.vmioplug (3.1.4) Support
[not loaded]com.vmware.kext.vmnet (3.1.4) Support
[not loaded]com.vmware.kext.vmx86 (3.1.4) Support
Startup Items: HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
[not loaded]com.adobe.fpsaud.plist Support
[not loaded]com.adobe.SwitchBoard.plist Support
[not loaded]com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[not loaded]com.avast.init.plist Support
[not loaded]com.avast.uninstall.plist Support
[not loaded]com.avast.update.plist Support
[not loaded]com.cloudpath.maccmd.plist Support
[not loaded]com.crashplan.engine.plist Support
[not loaded]com.google.keystone.daemon.plist Support
[not loaded]com.logmein.logmeinblanker.plist Support
[not loaded]com.logmein.logmeinserver.plist Support
[not loaded]com.logmein.raupdate.plist Support
[not loaded]com.oracle.java.Helper-Tool.plist Support
[not loaded]com.oracle.java.JavaUpdateHelper.plist Support
[not loaded]com.orbicule.uc.plist Support
[not loaded]com.parallels.desktop.launchdaemon.plist Support
[not loaded]com.vmware.launchd.vmware.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[not loaded]com.avast.userinit.plist Support
[not loaded]com.google.keystone.agent.plist Support
[not loaded]com.hp.help.tocgenerator.plist Support
[not loaded]com.logmein.LMILaunchAgentFixer.plist Support
[not loaded]com.logmein.logmeingui.plist Support
[not loaded]com.logmein.logmeinguiagent.plist Support
[not loaded]com.logmein.logmeinguiagentatlogin.plist Support
[not loaded]com.oracle.java.Java-Updater.plist Support
[not loaded]com.orbicule.UCAgent.plist Support
[not loaded]com.parallels.desktop.launch.plist Support
[not loaded]com.parallels.DesktopControlAgent.plist Support
[not loaded]com.parallels.vm.prl_pcproxy.plist Support
User Launch Agents:
[not loaded]com.adobe.ARM.[...].plist Support
[not loaded]com.adobe.ARM.[...].plist Support
[not loaded]com.akamai.single-user-client.plist Support
[not loaded][email protected]
[not loaded]com.avast.home.userinit.plist Support
User Login Items:
CrashPlan menu bar
VMware Fusion Start Menu
Dropbox
TeamViewer
EvernoteHelper
Internet Plug-ins: GlancePlugIn: Version: 2.5.6 - SDK 10.4 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.1.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobePDFViewer: Version: 10.1.10 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.1.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Safari Extensions: avast! Online Security: Version: 9.0.2022.120
Audio Plug-ins: iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins: Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
User iTunes Plug-ins: TuneUp Visualizer: Version: 2.2.0 Support
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.26 Support
WebEx64: Version: 1.0 Support
3rd Party Preference Panes:
Akamai NetSession Preferences Support
Citrix online plug-in Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Perian Support
Time Machine: Time Machine not configured!
Top Processes by CPU:
23%firefox
2%WindowServer
1%Microsoft Word
0%Finder
0%Microsoft Excel
Top Processes by Memory:
307 MBfirefox
164 MBMicrosoft Word
108 MBMicrosoft Excel
90 MBWindowServer
72 MBDock
Virtual Memory Information:
1.11 GBFree RAM
1.14 GBActive RAM
392 MBInactive RAM
2.36 GBWired RAM
341 MBPage-ins
0 BPage-outs
EtreCheck in Normal Mode
EtreCheck version: 1.9.12 (48) Report generated July 24, 2014 3:59:15 PM CDT
Hardware Information:
MacBook Pro (17-inch, Early 2008) (Verified)
MacBook Pro - model: MacBookPro4,1
1 2.6 GHz Intel Core 2 Duo CPU: 2 cores 5 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 512 MB
Color LCD 1280 x 800
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:11:57
Disk Information:
WDC WD1600BEVS-00VAT0 disk0 : (160.04 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (27.56 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Kernel Extensions:
[loaded]com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) Support
[loaded]com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded]com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded]com.devguru.driver.CDFree (0.1.8) Support
[not loaded]com.devguru.driver.DevGuruVsp (0.1.8) Support
[loaded]com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded]com.parallels.kext.prl_usb_connect (7.0 15107.796624) Support
[loaded]com.vmware.kext.vmci (3.1.4) Support
[loaded]com.vmware.kext.vmioplug (3.1.4) Support
[loaded]com.vmware.kext.vmnet (3.1.4) Support
[loaded]com.vmware.kext.vmx86 (3.1.4) Support
Startup Items:
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
[loaded]com.adobe.fpsaud.plist Support
[loaded]com.adobe.SwitchBoard.plist Support
[loaded]com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
[loaded]com.avast.init.plist Support
[loaded]com.avast.uninstall.plist Support
[loaded]com.avast.update.plist Support
[loaded]com.cloudpath.maccmd.plist Support
[running]com.crashplan.engine.plist Support
[loaded]com.google.keystone.daemon.plist Support
[not loaded]com.logmein.logmeinblanker.plist Support
[running]com.logmein.logmeinserver.plist Support
[loaded]com.logmein.raupdate.plist Support
[loaded]com.oracle.java.Helper-Tool.plist Support
[loaded]com.oracle.java.JavaUpdateHelper.plist Support
[running]com.orbicule.uc.plist Support
[running]com.parallels.desktop.launchdaemon.plist Support
[loaded]com.vmware.launchd.vmware.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[loaded]com.avast.userinit.plist Support
[loaded]com.google.keystone.agent.plist Support
[loaded]com.hp.help.tocgenerator.plist Support
[failed]com.logmein.LMILaunchAgentFixer.plist Support
[running]com.logmein.logmeingui.plist Support
[running]com.logmein.logmeinguiagent.plist Support
[not loaded]com.logmein.logmeinguiagentatlogin.plist Support
[loaded]com.oracle.java.Java-Updater.plist Support
[running]com.orbicule.UCAgent.plist Support
[loaded]com.parallels.desktop.launch.plist Support
[loaded]com.parallels.DesktopControlAgent.plist Support
[running]com.parallels.vm.prl_pcproxy.plist Support
User Launch Agents:
[loaded]com.adobe.ARM.[...].plist Support
[loaded]com.adobe.ARM.[...].plist Support
[running]com.akamai.single-user-client.plist Support
[failed][email protected]
[loaded]com.avast.home.userinit.plist Support
User Login Items:
CrashPlan menu bar
VMware Fusion Start Menu
Dropbox
TeamViewer
EvernoteHelper
Internet Plug-ins:
GlancePlugIn: Version: 2.5.6 - SDK 10.4 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.1.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobePDFViewer: Version: 10.1.10 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.1.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.2.0 Support
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.26 Support
WebEx64: Version: 1.0 Support
3rd Party Preference Panes:
Akamai NetSession Preferences Support
Citrix online plug-in Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Perian Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
6%WindowServer
4%mdworker
2%SystemUIServer
0%LogMeIn
0%configd
Top Processes by Memory:
113 MBCrashPlanService
108 MBcom.avast.daemon
108 MBDropbox
92 MBFinder
67 MBSystemUIServer
Virtual Memory Information:
2.61 GBFree RAM
1.19 GBActive RAM
651 MBInactive RAM
573 MBWired RAM
534 MBPage-ins
0 BPage-outs
There were two listed as [failed]:
Launch Agents:
[failed]com.logmein.LMILaunchAgentFixer.plist Support
User Launch Agents:
[failed][email protected] -
What is the cause for the mac to become slow
what is the cause for the mac to become slow?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
TS3694 What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
What is the cause of "error 1015" when you're trying to restore and update an iphone 3gs? My iphone is currently in recovery mode and can not get out of it. All the information about my iphone shown on itunes is only marked as- N/A. How can I get my iphone out of recovery mode and get it to recover and update?
Thank you,
MacQuestioner3http://support.apple.com/kb/TS3694#error1015, which says:
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words, either your phone is jailbroken and you are sadly out of luck or you are trying to downgrade iOS. -
Since two days I get an error message when I try to sign in without further notice what is the cause
Since two days I become an error message when I try to sign in without any further information what is the cause of this error message.
Hi,
I apologize for the trouble. We had a service maintenance on 1/10 and it is working already so please try to login at https://createpdf.acrobat.com/signin.html.
Please let me know if you still have the same issue.
Thank you.
Hisami -
While on Facebook, I always need to refresh the page to know I received a message, comment or whatever else. Also, while on game sites such as Gamespot, Firefox does not play any videos. All this is happening in version 3.6.9. What is the cause for this?
How ram does your machine have have you tried shut the machine down pull the power plug for a few minutes and plug it back in and restart the computer. The only thing I can think of is Low onn Ram or the speed of your connection. It might be the player you are using as well. download VLC Player itwill play everything.
-
What is the cause of the loss wireless between the WRT110 & WAG54GX2 ?!!!
The beginning, I like to thank you my brothers for your help me to solve a problems facing the wireless network, a few days before i put the subject of the problem of communication between the WRT110 & Linksys WRT160N on this link
http://forums.linksys.com/t5/forums/postpage/board-id/Wireless_Routers?comm_cc=US&comm_lang=en
I have Linksys WAG54GX2 as main router with the Internet service, & it's conneted with WRT110 device through the wire, so that the latter re-broadcast the Internet in rooms away from the main distributor
The problem is that every few seconds separated the wireless network distributor WRT110 cut off the Internet !!!
what is the cause of this problem?!!
Another point that the Internet has become slow across the wireless network in both routers,, what is the reason of that?!!
am attached some pics. of the settings of the two routers
First the main router settings (WAG54GX2):-
http://img520.imageshack.us/img520/985/linksyswag54gx2pic1wb2.jpg
http://img442.imageshack.us/img442/395/linksyswag54gx2pic2dy5.jpg
http://img442.imageshack.us/img442/2549/linksyswag54gx2pic3ih4.jpg
http://img442.imageshack.us/img442/7159/linksyswag54gx2pic4bp3.jpg
WRT110 router settings:-
http://img248.imageshack.us/img248/4908/wrt110pic1tv3.jpg
http://img248.imageshack.us/img248/6950/wrt110pic2vc5.jpg
http://img248.imageshack.us/img248/5788/wrt110pic3fr1.jpg
http://img248.imageshack.us/img248/4682/wrt110pic4vd6.jpg
http://img248.imageshack.us/img248/3711/wrt110pic5sm4.jpgThank you for your help, my dear,
I have worked as your good advice, Now i have a strong network and the Internet has become a quick .
I would understand some things about our preparations:
* is should the channel be different in those routers, and what would happen if they were on the same channel ?
* My wireless networks are not protected now, its un safe .. What is the best encryption of the wireless network .. Do you use the WEP or WAP, including what is the difference ?
* What are the steps to be followed by encryption in both the routers the main WAG54GX2 & WRT110?
* Why we change Fragmentation in WRT110
Can you help me in this link
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=116282
Thank u again my brother
Message Edited by Almowdmer on 11-29-2008 11:19 PM -
I noticed that some of my podcast are missing from the iTunes store. What is the cause of that?
That suggests that the tracks are damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
My mac pro is taking long to open any program what is the cause of this
my mac pro is taking long to open any program what is the cause of this
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.
I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.
Maybe you are looking for
-
Is there a way of having the email name show and not the Company name.
I have a few address listing for Companies that have 7 or 8 names. I have them listed with the custom names for each person separately. I really do not need separate e-mail listings for each person. Is there a way that would list the individuals name
-
Error while deploying entity javabean (CMP)
Hello, I have a problem while I'm trying to deploy an entity javabean (with container managed persistance). I'm using JDeveloper 3.2.3 and 8.1.7.2 database. Here is the error I get: *** Executing deployment profile E:\Xaris\JDeveloper\General\EJBs\Em
-
Restructuring Small Bus Network on RV016
Hello. I have been with a fast paced growing business the past 9 years. When we started we maybe had 10 devices or so on the computer network, we now probably have a couple hundred or so. We are planning on expanding even more and I am looking into r
-
what are the different status available for an order document. what is the table field that refers to?
-
How to insert photos over clips
Friends, In iMovie 08 I could insert photos over clips. I can´t see how to do this in iMovie 09. If it is possible, could someone please tell me how to do it? In mid-stream of an edit and would be very much assisted if I could be advised asap. Thanks