What is the " Change voicemail passw" option for?

I change the voicemail pass on my phone, but it never prompt u for one, and its visual mail, so if the phone is unlocked anyone can hear ur messages. So whats that option for? Also the iphones at the apple store would actually be dialing in to the voicemail the way regular phones do,,, can I do that on my phone? Am I missing something?

When you call your vm from another phone you need to enter your password, which is why you need to have one.

Similar Messages

What are the support or replacement options for my out of warranty phone?

My beloved 3G, that I use now as a jump drive and an iPod, just died. Dead dead. No response from any buttons, no reset ability, no restoring... Nothing, other than if i charge it it gets really hot. Really really hot.
I have purchased two MacBooks, four iPhones and one iPad over the past three years for myself and my family, and I am wondering what support apple will offer me for my new doorstop. I know it won't be free and I understand that..... But????? Anything? Anyone know? Can I upgrade? Replace? Repair?
Thanks in advance.

There is nothing special provided in this regard regardless how many Apple products you have purchased over the last 3 years.
Apple offers an out of warranty or not covered under the warrant "repair" price, which pays for an exchange for the same model at a significantly reduced price off what was the full retail sales price. The cost is $199 plus applicable sales tax and the exchange will include a 90 day warranty. This does not require signing a new two year contract with AT&T. This will be for another 3G - the same color and storage capacity. Not sure if Apple offers this for an iPhone that is no longer activated with AT&T, but as already provided, there will be no charge at an Apple store to have a diagnostic check run on your iPhone to determine where the problem lies. If only the battery, Apple has a price to replace the battery only, or you can use a 3rd party for this, or try to do it yourself if you are so inclined.
http://www.apple.com/support/iphone/service/faq/#warranty7

What is the best Graphic Card Option for me?

I have a first generation Quad Core Mac Pro with a Radeon X1900XT with dual DVI Connections for my two older Apple 24" LCD Displays. I want the best card to run Adobe CS5 and support dual DVI for my 2 monitors. I was told maybe the ATI 4870 or 5770. What would be the best card for CS5 and Final Cut Studio?

300 dollars.. 250 for the backplane board(661-5706), and for the single processor tray(661-5707) - your price may vary.. I got mine for 50 dollars.
so, for 300 dollars.. you can make your 2009 mac pro into a 2010.. and yes, you can use the same existing processors.. the good news is that 1333 mhz memory works with the following processors in the new board: W3570, W3580(High end 3.33 2009 mac pro quad which was 1400.00 extra as a configure to order on apple's store from a 2.66 quad-core at 2499.99), and finally the W3680.
I am running still my w3580 with now 8GB of DDR3 1333 mhz memory.. it was 1066, but i got 1333 for a great price..
If you want to know more information about this, please send me a private email.
I can help you if you want..
Please note: if you have the 4870 HD Apple version, and not pc flashed, the sensor reading is too high for the 2010's firmware... you will need the GT120 or the 5770 graphics card.. 5870 is not going to be available for sometime and there is rumor from AMD themselves stating the card might be EOL..

What is the gcc/g++ compiler option for data race?

Is data race detaction supported on Linux using gcc/g++?
It seems it is only supported on Solaris using -xinstrument=datarace option in "CC".
Thanks,
Ethan

EthanWan wrote:
Is data race detaction supported on Linux using gcc/g++?This is not the best place to ask about GNU compilers options this forum being about Sun Studio compilers. There are plenty of places devoted specifically to gcc/g++.

What are the differences in format options available for partition?

what is the differences in format options available for partition?

Select the drive in Disk Utility, click on the Erase or Partition tab, select the Format type: dropdown menu that will list your format options. For OS X the only option you should use is Mac OS Extended, Journaled. This is the standard format for OS X drives.
Then there are options for Windows - MSDOS (standard FAT format) or ExFAT (an advanced FAT system with most of the characteristics of NTFS.) OS X can read and write with either filesystem. NTFS is only readable, not writeable, by OS X.

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

What is the default iTune Folder Structure for iTunes 10?

What is the default iTune Folder Structure for iTunes 10? As far as I can tell in windows 7 it goes something like.
My Music\iTunes\iTunes Media\Music
Other folders for downloads, pod casts, mobile applications are all in the iTunes Media folder, however the iTunes library database files are located in the iTunes Folder.
The reason I ask is that I am re-doing my music collection and I set up the folder structure mentioned above, but iTunes re-arranded everything and copied all of my music into the iTunes Media folder.
Anyone have any idea how iTunes does it by default?

Here are typical layouts for the iTunes folders:
If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other.
Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is greyed out (already upgraded) or you prefer the older layout.
2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organised outside the designated media folder into it. NB This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards. If space is at a premium try my scripts Unconsolidated to find out what would need moving and ConsolidatebyMoving to move rather than copy it.
3. Select Edit > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
4. Select Edit > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
5. (Optional) Close iTunes, rename the folder iTunes Music as iTunes Media then restart iTunes. Check under Edit > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename.
6. (Optional - Windows only) If Windows Media Player has ever had access to your files it may have liberally scattered folder artwork files about which iTunes won't tidy up when it reorganizes things, thus leaving behind a heap of folders with artwork and no media. I've written a script for cleaning this mess up called CleanDeadArt.
PS If you really prefer the older layout, but it is already in the new one then edit the file called .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
tt2

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What is the benefit in using OID for names resolution?

I have been wondering about this for awhile. I have been working on getting this to work in Iplanet along with Pat Lehane ([email protected]), and it works now.
What are the benefits in using OID for names resolution when you can just use the static tnsnames.ora. Database and database names are not created dynamically and they don't change that often. Would creates a new database every day and has to worry about changing the static tnsnames.ora file. In my environment, we run Oracle applications from a server, so there is only one tnsnames.ora file, on the file server.
It would appear that using OID would cause extra traffic (LDAP lookups) on your network.
I would like some opinions from both Oracle and Oracle users. Thanks

hi,
A benefit of using OID for names resolution is that it allows you to centralize net8 naming (i.e., tnsnames) information in the same place (OID) where other types of administrative information (about users, enterprise groups, enterprise roles, etc) gets stored. If you are more comfortable using tnsnames.ora files for net8 naming, that is perfectly fine!
An important reason that Oracle had for providing Net8 naming functionality in OID is that the legacy 'Oracle Names' functionality of Oracle 7 will eventually be desupported. This is discussed in metalink Note #135696.1 on http://metalink.oracle.com .
Hope this helps.

What is the best word processing program for ipad2?

What is the best word processing program for ipad2?

I would recommend using Pages for what you are doing. It is the best one to use on the iPad itself, and has the ability to convert to an MS Word format. I know that it can do this through email, but I am also fairly certain you can import it in this format through iTunes, though you may need to convert it on the iPad itself.
With iOS 5 and iCloud, I recommend kicking Word to the curb altogether and going with Pages on both machines. Not only will everything be more seamless, but iCloud will update the changes you make, on either device, automatically. And Pages is only 20 bucks through the App store for the Mac (OS 10.6.7 or later needed).

What are the defaul username and password for SQL Plus ?

hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
When you install it, you'll be given several options about the type of database you want.
But before you install anything, you should read the installation manual for your platform.

What were the changes to the recent iPhoto update?

Anybody have the thread/website that shows what the recent UPDATE to iPhoto was?
What were the changes?
thanks.

The usual place to start looking for "what was changed" in a particular new version release is the Release Notes for that version. <br />
https://www.mozilla.org/en-US/firefox/28.0/releasenotes/
From that page you can use the hyperlink for the [https://bugzilla.mozilla.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&f1=target_milestone&f2=cf_status_firefox28&f3=target_milestone&j_top=OR&o1=anywords&o2=anywords&o3=equals&query_format=advanced&resolution=FIXED&v1=mozilla28&v2=fixed%2Cverified&v3=Firefox%2028&order=bug_id&limit=0&list_id=9960032 complete list of changes in this release], which displays the '''RESOLVED, VERIFIED, CLOSED''' Bugs reports for that version. 3934 Bugs are listed there for the Firefox 28.0 Release version.

What is the change occured by using the package in select statement

Hi all,
Can some one please tell me using the following package in the select statement of the view does it restricts the data or fetches the data
what is the change occurred using the package for fetching the date column
hr_discoverer.check_end_date (per_assignments_f.effective_end_date)
Thanks in advance

You can check the code -
-- this function checks to see if a date is equivalent to the end of time(31-Dec-4712)
-- if this is true it will return null else the actual end-date
Cheers,
Vignesh

What's the best flash to use for nighttime sports games?

What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

What is the " Change voicemail passw" option for?

Similar Messages

Maybe you are looking for