What is the cisco ironport C680 and M680 configuration backup file size?

what is the cisco ironport C680 and M680 configuration backup file size?

Size of the XML itself? That is going to vary based on what you have configured, total lines of code, and # of appliances you may/may not have in cluster.
M680, based on SMA as stand-alone, should be similar --- you are probably looking @ < 1 MB...
Looking @ my test environment, in which I have a nightly cron job set to grab a backup of...
-rw-rw---- 1 robert robert 161115 Sep 26 02:00 C000V-564D1A718795ACFEXXXX-YYYYBAD60A5A-20140926T020002.xml
So, 161115 bytes = .15 MB
-Robert

Similar Messages

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What's the best settings to Export movie for smaller file sizes?

Hi, I've been working on some helmet cam footage which was taken with Xvidmpeg4.avi and was advised to convert it to dvavi for editing in PrE, this created a huge file to work with, the original footage was 206mb and the finished edited dvavi file is now 1.56gb, what settings can I use to export the movie with a much smaller file size, but hopefully try to retain some quality, to upload to places like Vimeo? I thought I would try to export it in the same as the original footage Xvidmpeg4.avi thinking this might compress it again to something like the 206mb of the original and the original was good quality footage, but PrE just hangs up with a box stating 'Xvid Status (Not Responding)' and when I try to cancel that the whole thing crashes and closes? So when I go to File > Export > Movie, what would be the best settings in:
General > File Type ?
Video > Compressor
lots of options under compressor if I select the file type as Microsoft AVI, so I'm guessing something under that would compress it to a smaller file size but what, I could spend all night trying different settings so hoping for some advice?
Or, if I'm completely in the wrong place for the settings and should be doing something else please tell me?
Thanks, Gav

Thanks for the replies, but to me it's still confusing - simply because there are so many settings, if I go to Share/Personal Computer I'm then presented with a whole load of settings
NTSC Flash Video
MPEG
DVAVI
Windows Media
QuickTime
and under each of those is a lot more advanced settings?
I'm guessing I wouldn't use flash or quicktime, so which of the others would I use and what are the advanced settings to use as I can't find anything that is .wmv or .mov
What I've done with other videos that I've exported from PrE as dvavi is then to put it through Windows Movie Maker, Publish Movie, This Computer, then put the settings to Windows Media DVD Quality (PAL) (3.0 Mps) - this seemed to be the only setting that reduced the file size considerably but still had good quality, but it's still about twice the original file size?
This all seems long winded to me, open original file, convert original file, output another file, then output the file again in something else which then results in loss of quality and a larger file than the original? I'm ending up with lots of files, was hoping just to edit in Premiere then export/publish that edited clip and that would be it, then upload to the net.
Is it not possible to just edit my original footage and save it, just like you would with something like a word document, should I be using something else and not Premiere?
Thanks.

What is the Cisco 881G "PDP establish max timeout" ?

Hi
What is the Cisco 881G "PDP establish max timeout"?
The Cisco 881G 3G connection is to be disconnect by PDP establish max timeout. I want to infinite to establish this connection. What parameter I can adjust?

Hi Jonson,
PDP Context Idle Timeout
When a data session is established it uses resources in the network, if there is no data passing over this session then many operators close the session automatically after a set period of time. This can be as short as after 10 mins and as long as after 24 hours. Each time the data session is closed any rounding and minimum session size criteria will be applied.
try the below command.
you also might need to update the firmeware on the router to get the dialer persistant command
router(config-if)#dialer idle-timeout 0
cheer
phil

What's the relation between Gain and transmitted power with coverage area?

what's the relation between Gain and transmitted power with coverage area?
if we want add coverage area, could we just add antenna's gain only or add transmitted power only?

That information can be found at: http://www.cisco.com/warp/customer/cc/pd/witc/ao350ap/prodlit/agder_rg.htm

Is the cisco ironport c170 end of sale?

Hi,
I was wondering whether the Cisco Ironport C170 is end of sale?, if so what is the replacement?
Thanks

Hi Juan,
As far as I know C170 is not in end of sale.
You can verify with your Cisco Account contacts for more details.

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

What is the diffrence between cookies and cache, is it safe to remove cache?

what is the difference between cookies and cache , is it safe to remove cache ? . I had cleaned cookies many times but I have not removed cache , does it goes on increasing day by day ? please let me know

Cookies are small files that contain information useful to a web site -- such as password, preferences, last date visited, etc. You may remove the cookies that you don't want adn since some of them are a privacy issue, many people remove them all.
Cache is just a collection of data downloaded to help display a web page. After you leave a site, much of the cache is left on your computer and is no longer needed. You can always remove the cache because it will be replaced as needed.

What is the diffrence between BAPI and RFC and business object

Hi Experts,
Can anybody tel me what is the diffrence between RFC and BAPI , and also what is ther relation with business object?
Thanx in advance.
Nilesh Hiwale

Hi,
BAPI's are associated with Business Objects and also they are RFC enabled.
But RFC's are the FM's which can be called from external systems, those FM's can be used in many places based on the applications..
Check these Links
whats the difference between BAPI and RFC??
Diff. Between BAPI and RFC
Regards
Kiran

What is the diffrence between PGA and UGA?

Hi All
Just one question
"What is the diffrence between PGA and UGA?"
Thanks

PGA Memory
The Program Global Area (PGA) is a memory region that contains data and control information for a single process (server or background). The PGA is made up of the following:
Stack Space
A PGA always contains a stack space, which is memory allocated to hold a session's variables, arrays, and other information.
Session Information - (UGA)
A PGA in an instance running without the multi-threaded server (named Shared Server in Oracle9i) requires additional memory for the user's session, such as private SQL areas and other information. If the instance is running the multi-threaded server, this extra memory is not in the PGA, but is instead allocated in the SGA (the Shared Pool).
Shared SQL Areas
Shared SQL areas are always in shared memory areas of the SGA (not the PGA), with or without the multi-threaded server.
Non-shared and Writable
The PGA is a non-shared memory area to which a process can write. One PGA is allocated for each server process; the PGA is exclusive to a server process and is read and written only by Oracle code acting on behalf of that process.
UGA Memory
The UGA, or User Global Area, is allocated in the PGA for each session connected to Oracle in a dedicated server environment. The PGA is memory allocated at the client to hold a stack which contains all of the session's variables, etc. In a Shared Server environment, Oracle allocates this memory in the Shapred Pool (the shared pool is contained in the SGA), for all sessions. This helps to reduce the PGA (client) memory footprint of Oracle, but will increase the SGA (shared pool) requirements.

What is the diffrence between pallet and quant

Dear friends,
what is the diffrence between pallet and quant

Hi,
Pallet is the material storage device & quant is the stock of the material in a storage bin.
I will request you if you are new comer to WM please refer any online WM guide for various terminology.
Regards,
PRashant

What is the diffrence between ASCII and BIN mode

Hello All,
What is the diffrence between ASCII and BIN mode
Regards,
Lisa.

'ASC' :
ASCII format. The table is transferred as text. The conversion exits are
carried out. The output format additionally depends on the parameters
CODEPAGE, TRUNC_TRAILING_BLANKS, and TRUNC_TRAILING_BLANKS_EOL.
'IBM' :
ASCII format with IBM codepage conversion (DOS). This format correspond
to the 'ASC' format when using target codepage 1103. This codepage is
often used for data exchange by disc.
'DAT' :
Column-by-column transfer. With this format, the data is transferred as
with ASC text. However, no conversion exists are carried out and the
columns are separated by tab characters. This format creates files that
can be uploaded again with gui_upload or ws_upload.
'DBF' :
The data is downloaded in dBase format. Because in this format the file
types of the individual columns are included, import problems, for
example, into Microsoft Excel can be avoided, especially when
interpreting numeric values.
'WK1' :
The data is downloaded in Lotus 1-2-3 format.
'BIN' :
Binary format. The data is transferred in binary format. There is no
formatting and no codepage conversion. The data is interpreted row by
row and not formatted in columns. Specify the length of the data in
parameter BIN_FILESIZE. The table should consist of a column of type X,
because especially in Unicode systems the conversion of structured data
into binary data leads to errors.

What is the diffrence between LIS and LO Cockpi

Hello All,
What is the diffrence between LIS and LO **** pit.
Regards,
Lisa

Hi Lisa,
take a look to my weblog to have more info...
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Hope it helps!
Bye,
Roberto

What is the diffrence between extends and creating new object?

HI ALL,
what is the diffrence between extends and creating new object?
meaning
class base{
class derived extends base{
class base{
class derived {
derived(){
base var = new base();
can u people tell me diffence from the above examples.
THANKS.
ANANDA

When you create a new object you have to supply the class to which that
object belongs. A class can extend from another class. If it does so
explicitly you can define the 'parent' class from which the class extends.
If you don't explicitly mention anything, the class will implicitly extend
from the absolute base class named 'Object'.
Your example is a bit convoluted: when you create a Derived object,
its constructor creates another object, i.e. an object from the class from
which the Derived class extends.
Extending from a class and creating an object don't have much in common.
kind regards,
Jos

What is the diffrence between multicasting and broadcasting?

hi friends
What is the diffrence between multicasting and broadcasting?
i'm bit confused in multicasting and broadcasting.

Broadcasts go everywhere within a range determined by the sender.
Broadcasting is deprecated and unliikely to go beyond the nearest router.
Multicasts go everywhere where receivers have declared they are present.
Multicast can be implemented beyond routers in a WAN which you control but ISP routers generally don't support it.

What is the cisco ironport C680 and M680 configuration backup file size?

Similar Messages

Maybe you are looking for