What is the code to make something STAY on the stage? Also, some button issues.

That might be confusing. I am new to Flash, and I have a
scene with animations happening, but I'm finding that things that I
want to just stay static are ending up disappearing unless I have
something in every keyframe...I'm just wondering how it is you make
some generic text, for instance, just REMAIN without picking an
ending frame, etc. etc.
I was also wondering...how to get a button to do movie
clip-like things. Ideally, I would like to insert a functioning
button within a movie clip. Is there a way to do that? I want a
button, which has an up, over, down state to also be able to fade
into the stage at some point.
I am good at other things, I PROMISE.

Melissa,
Have you tried adding a new layer, spanning the whole of your
timeline, and putting your static text on that layer?
Brian.

Similar Messages

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

What is the fix for some applications repeatedly asking permission to accept incoming connections?

What is the fix for some applications repeatedly asking permission to accept incoming connections?
On every restart, AutoPairs and Epson Event Manager asks me to reject or agree to allow incoming connections. It is very aggravating and time-wasting. I know other Mac users who have the identical problem with other applications on their Macs.
Isn't there some way to make my Mac understand that "Yes" means "Yes" once and for all?
I am presently running Yosemite, but this was a problem with prior OS X versions too.
Respectfully,
Nate

This is a comment on why you might, or might not, want to use the built-in Application Firewall.
The firewall blocks incoming network traffic, regardless of origin, on a per-application basis. By default it's off, and when turned on, it allows applications digitally signed by Apple, and only those applications, to listen on the network. It does not block outgoing traffic, nor can it distinguish between different sources of incoming traffic, nor does it filter traffic by content.
No matter how it's configured, the firewall is not, as some imagine, a malware filter. If that's what you expect it to do, forget it. All it will do is bombard you with pointless alerts.
Consider some scenarios in which you may expect the firewall to be useful.
1. You enable file sharing, and you allow guest access to certain folders. That means you want people on your local network, but not outsiders, to be able to access those shared folders without having to enter a password. In the default configuration, the firewall will allow that to happen. The router prevents outsiders from accessing the shares, whether the application firewall is on or off. But if your computer is portable and you connect it to an untrusted network such as a public hotspot, the firewall will still allow access to anyone, which is not what you want. It does not protect you in this scenario.
2. You unknowingly install a trojan that steals your data and uploads it to a remote server. The firewall, no matter how it's configured, will not block that outgoing traffic. It does nothing to protect you from that threat.
3. A more likely scenario: The web browser or the router is compromised by an attacker. The attack redirects all web traffic to a bogus server. The firewall does not protect you from this threat.
4. You're running a public web server. Your router forwards TCP connection requests on port 80 to your Mac, and the connections are accepted by the built-in web server, which is codesigned by Apple. The application firewall, still configured as above, allows this to happen. An attacker hacks into the system and tries to hijack port 80 and replace the built-in web server with one that he controls. The good news here is that the firewall does protect you; it blocks incoming connections to the malicious server and alerts you. But the bad news is that you've been rooted. The attacker who can do all this can just as easily turn off the firewall, in which case it doesn't protect you after all.
5. You're running a Minecraft server on the local network. It listens on a high-numbered port. You, as administrator, have reconfigured the firewall to pass this traffic. An attacker is able to log in to a standard account on the server. He figures out how to crash Minecraft, or he just waits for you to quit it, and then he binds his own, malicious, Minecraft server to the same port. The firewall blocks his server, and because he's not an administrator, he can't do anything about it. In this scenario, the security is genuine.
6. Here is a more realistic scenario in which you might have reason to enable the firewall. Your MacBook has sharing services enabled. You want those services to be available to others on a home or office network. When you're on those networks, the firewall should be off. When you move to an untrusted network, you can either turn off all the services, or enable the firewall with a non-default configuration to block them. Blocking is easier: one click instead of several.

HT201441 what if the user also forgot id apple? how to solve this problem? whether the iPhone can still be used?

what if the user also forgot ps apple? how to solve this problem? whether the iPhone can still be used?

Start here:
https://iforgot.apple.com

Good day actually i purchase second hand iphone from Swiss and we i try to open it in Egypt the phone showing it's locked as it was working in Swiss, so no one will help me like Apple it self just i want to know what is the way to fix this issue please?

good day actually i purchase second hand iphone from Swiss and we i try to open it in Egypt the phone showing it's locked as it was working in Swiss, so no one will help me like Apple it self just i want to know what is the way to fix this issue please?

You need to find out who the carrier was in Switzerland and see if they will unlock the device. The carrier with the lock is the only one that can authorize the unlock. You may need to check with the original owner and see if they can get it unlocked by the carrier if you do not qualify.

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

Simple question: White vs. Black Iphone 4 - what are the differences? Some say that white is thinner with different camera. Some say white is "faster"?

Simple question: White vs. Black Iphone 4 - what are the differences? Some say that white is thinner with different camera. Some say white is "faster"?

White iPhone 4 vs. Black iPhone 4: Do They Have Different Cameras ...
The white iPhone: Does size matter? | iPhone Atlas - CNET Reviews

[svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

How to make text STAY up after removing mouse from button?

Hello!
I honestly hope that this thread title makes sense. Allow me to explain my predicament.
Someone has created a map where there are little colored buttons over building locations. The buttons were made so that when you hover your cursor over them, they will bring up a little chat bubble (like the ones you see in comics) with the appropriate street address text. What I cannot figure out is how to, after removing the cursor from over a button, make the text bubble stay put so that those who see the map can highlight then copy and paste the street address from it.
Is there any advice?

It kinda depends on what version of actionscript you're using, but one that may work for AS2 and AS3 is to use setTimeout to call a function that does what your rollout code currently does... meaning in your rollout function you use: setTimeout(callFunction, x-seconds)... where callFunction is a function that contains what your rollout function did originally.

What is the difference between "System" buttons and boolean buttons?

I'm writing a VI with an event structure that allows me to push different buttons to control external instruments, but I found two types of buttons worked: "System" buttons and "Boolean" buttons. On the surface, the functionality seems the same: I can write the VI so that either one works, and they work in the same way, but which one is right?
Here is a little more info on what I'm doing. I have a case structure that has one "timeout" case, which just measures the position of a movable stage. Another case, if a "system"-type button is pressed, moves the stage to an absolute position. Another case activated by a "boolean"-type button moves the stage to the zero point. I could switch these and it would still work, but I don't understand how the buttons are different.
Also, right now I'm using the "run continuously" function so that the loop just repeats. Is this the right way to do it? I could put everything inside a loop, and make my own stop button for it. Would that be better? Worse? --> I think I found the answer to my own question: run continuously will stop and start the code at each instance, so a while loop will be better because it doesn't start and stop repeatedly. (True?)
Thanks,
Karl
Message Edited by Karl T. on 03-31-2008 05:43 PM

Karl,
You never want to design your program to have to use the run continuously button. It is more for debugging than anything else. Using a while loop with your own stop button is the preferred method of doing things.
The System, 3-D, and Classic Booleans all basically work the same. The appearance is different. The System buttons look like your OS buttons that you see on all your other programs. The 3-D were introduced in LV6 and remain standard across different OS's and are not affected by System color changes or System theme changes. The classics behave similarly to the 3-D, but they are the older controls that existed prior to LV6 and have been kept for legacy's sake.
There are arguments for using system controls vs. 3-D controls (I don't think most people use the classic controls much anymore). So, you really have to make a personal decision as to which you prefer to use. NI pushes the system controls, but you'll notice there is a large number of controls which are not available in the system pallette. I have made versions that look like system controls, but they do not automatically update for theme or system color changes.

Only show whats on the stage

I have two swfs, swfA and swfB.
swfA loads swfB into a MC. I want swfB to be limited to the
MC size it was loaded into.
The problem is that swfB is a gallery that stack the pic
horizontally and the pics run out the sides of the stage, but I
don't want to see them, only what fits on the stage. So is there a
way to make a mask that when something leaves the stage it can't be
seen?
Clear as mud?
Thanks In advance.
By the way is there a way to change my username or e-mail on
this site?

Oh, I got it. Thanks for the steer in the right direction.
For anyone that doesn't know:
MCA: movieclip you want to mask
MCB: movieclip you will use as mask
MCA.setMask(MCB);

What is the correct fsck syntax for issue with invisible disk ?

Hello everybody,
My problem actually (I also have a problem with the 17" Install DVD) is to repair *3 disks* with *fsck command*, as the filesystems are damaged. I phoned Apple Assistance Saturday, for about 30 minutes, but finally the Advisor sent me a link to one of their thousands (and sometimes obsolete) articles, and the solution wasn't there entirely.
I'll describe you the problem :
One of my USB external disks (4TB data) *doesn't appear* after Startup, but when I use the Install DVD and Disk Utility, the application tells me it's OK, that the disk "SEEMS" to be alright etc. That's false.
When I reboot with *Cmd + S* (root level), and tell Terminal (I have been obliged to print the four states of an American Extended keyboard) :
"sudo fsck -fy /dev/disk4s1"
the reply is :
"BAD SUPER BLOCK: MAGIC NUMBER WRONG
LOOK FOR ALTERNATE SUPERBLOCKS? yes
SEARCH FOR ALTERNATE SUPER-BLOCK FAILED. YOU MUST USE THE
-b OPTION TO FSCK TO SPECIFY THE LOCATION OF AN ALTERNATE
SUPER-BLOCK TO SUPPLY NEEDED INFORMATION; SEE fsck(8)."
So, I use the *-b option* of *fsck command*, and :
"fsck: -b flag *requires a number*"
"-b size Specify the size, in bytes, of the physical blocks used by
the -B option."
So, I'm searching *since 3 days* (and *I'm learning a lot*, but nothing, of course, concerning my problem) the full info command to know *what sector address* I have to tell to -b to install an alternate superblock, because I need to know exactly at which places filesystems and *data start* and end.
You understand, I suppose, that I can't use any of my softwares, because the disk is INVISIBLE (doesn't exist) after normal restarting.
It's not MOUNTED nor UNMOUNTED.
It exists (very well, thank you) when rebooting *with Apple Install DVD*.
I'm under *Snow Leopard 10.6.5*, and I don't know if, perhaps,
*there wouldn't be a problem* (or more) with this update ...
That's what I've seen, in any case, on other places here,
about several different issues.
Please, Bob, Gary, Camelot, etresoft, Bill, Jun, Nils, Cole, Charles, Michael,
gimme some help !
If someone has the full solution, a beginning of solution,
or a path to solution,
thank you very, very much in advance !
With my best regards
Vialatte

Dear Camelot,
First, thank you very much for answering me and try to help me ;
Secundo, please read, if you have time, what I replied to Bill Scott,
and I have to thank you also for your slightly better contribution and understanding.
Some words of what I've replied to him are written for you too :
"I type *sudo fsck -fy /dev/disk4s2* (not s1, of course, and *Camelot is perfectly right*, having remarked this mistake, as *s1 is dedicated to partition map* volumes).
There's also *a strange thing* with Disk Utility when starting from DVD :
it doesn't display the s1 volumes as usual."
As you've read it in my reply to Bill, it's a *complicated issue* and *Apple has no response*.
You tell me : "+Good luck with that.+" It starts badly.
"+It's been a long time since I've had to deal with superblocks+"
I totally ignored their existence …
"+- they just don't come up any more,+" What is the meaning of this sentence ?
"+but I don't know any way of recovering the superblock address after a disk has failed.+" That's the matter of my question : *Is it a failure ?*
"+Typically (at least, historically) you get the superblock addresses in advance, storing them somewhere safe until you need them.+"
That's a total discovery for me.
You tell me then : "+Are you talking about in the Finder here?+" Yes and no, I talk about the Sidebar (see below), but it's part of the Finder.
"+Have you checked the Finder's preferences to make sure it's just not hiding external drives?+" I did, when you told me to do so.
"+Since everything else tells you that the drive is OK+" Yes, you're right, when starting from Install DVD, that's *very strange*, but remember fsck doesn't say *the same at all* as Disk Utility ... "+this just sounds like a Finder preference setting to me.+"
I'm sorry, it would have been wonderful. My settings are correct, that means :
NOTHING on Desktop, ALL (including Computer) in the Sidebar (and clicking on Computer allows me to check that *no volume* has vanished from Sidebar (it happens sometimes).
"+If it's not the Finder prefs, then please post the output of diskutil list in order to troubleshoot further.+"
Here it is (a little far below), but there's *none of the 2 4TB volumes* (yes, there are two disks missing now) here, because, as I already said that, they are invisible for the Finder and *Disk Utility*, and I think *it's the same for Terminal.*
You'll note there's *no BOOTCAMP partition* here (I removed it temporarly to solve this issue), and don't be afraid if there are several systems on the internal HD.
As I noticed it here and there, there are problems with 10.6.5.
So, I try to work with 10.6.4 (delivered with MBP 17"), but have also an universal 10.6.0 Snow Leopard, with which I can configurate 10.6 *at any state*.
Unfortunately, I *can't use* (it so that Apple decided to do) the DVD delivered with my 15" MBP (rejected by 17"), because it is with my MBP 15" that I formatted those disks.
*Another thing :* If I didn't want my wife *to install herself* (with me to help her) the 15" MBP I've gave to her (there's the 17" new 500GB 5400rpm installed in it by me), I would already have tried to connect these two 4TB, just to see.
Last login: Fri Nov 26 21:22:38 on ttys005
sys171064:~ OH$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *500.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Seagate 149.9 GB disk0s2
3: Apple_HFS System 17 64.9 GB disk0s3
4: Apple_HFS Sys171064 34.9 GB disk0s4
5: Apple_HFS For Alu Black System 149.6 GB disk0s5
6: Apple_HFS SL 10.6.x 100.0 GB disk0s6
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *16.1 GB disk1
1: Applepartitionmap 32.3 KB disk1s1
2: Apple_HFSX olivier_herrbach 16.1 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_HFS HSD 01 TM 600 Go 599.9 GB disk2s2
3: Apple_HFS HSD 01 400 Go 120.6 GB disk2s3
4: Apple_HFS DiskTools > Seagate ... 279.1 GB disk2s4
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk3
1: EFI 209.7 MB disk3s1
2: Apple_HFS HELP ÉNERGIE 1,5 To 1.5 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk4
1: EFI 209.7 MB disk4s1
2: Apple_HFS HSD USB 03 1To 999.9 GB disk4s2
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *32.0 GB disk5
1: EFI 209.7 MB disk5s1
2: Apple_HFS Patriot USB Key 32 Go 31.7 GB disk5s2
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk6
1: EFI 209.7 MB disk6s1
2: Apple_HFS WD USB 1,5 To 1.1 TB disk6s2
3: Apple_HFS WD 02 350 Go Seagate 349.9 GB disk6s3
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk7
1: EFI 209.7 MB disk7s1
2: Apple_HFS HSD USB 02 50 Go 49.9 GB disk7s2
3: Apple_HFS HSD USB 02 715 Go 714.6 GB disk7s3
4: Apple_HFS HSD USB 02 110 Go 110.0 GB disk7s4
5: Apple_HFS HSD USB 02 100 Go 99.9 GB disk7s5
/dev/disk8
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk8
1: EFI 209.7 MB disk8s1
2: Apple_HFS WD USB 2To 2.0 TB disk8s2
/dev/disk9
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk9
1: EFI 209.7 MB disk9s1
2: Apple_HFS FW 03 TM 2To 2.0 TB disk9s2
/dev/disk10
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk10
1: EFI 209.7 MB disk10s1
2: Apple_HFS FW 02 1,2 To 1.2 TB disk10s2
3: Apple_HFS FW 02 200 Go 199.9 GB disk10s3
4: Apple_HFS FW 02 CS5MC 50 Go 49.9 GB disk10s4
5: Apple_HFS FW 02 Leopard 50 Go 50.0 GB disk10s5
/dev/disk11
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk11
1: EFI 209.7 MB disk11s1
2: Apple_HFS FC 02 Time Machine 1.0 TB disk11s2
3: Apple_HFS FC 02 SL 1To 999.5 GB disk11s3
/dev/disk12
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk12
1: EFI 209.7 MB disk12s1
2: Apple_HFS FC 01A USB 1To 700.0 GB disk12s2
3: Apple_HFS FC 01C 300 Go Leo 299.9 GB disk12s3
4: Apple_HFS FC 01B USB 1To 699.8 GB disk12s4
5: Apple_HFS Leopard 125 Go 300.0 GB disk12s5
/dev/disk13
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk13
1: EFI 209.7 MB disk13s1
2: Apple_HFS FW 04 TM 2To 2.0 TB disk13s2
3: Apple_HFS eDrive 12.9 GB disk13s3
/dev/disk14
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk14
1: EFI 209.7 MB disk14s1
2: Apple_HFS FW 05 2To 2.0 TB disk14s2
sys171064:~ OH$
As you and I see, I strongly believe that disk15s2 and disk16s2 (with s3, s4, s5 etc. partitions) are missing.
I must find a way to prove what I say to you. Remember that we are not in the case where I use *Cmd + s* after rebooting with Install DVD, but under normal utilisation. What follows has no interest :
Last login: Fri Nov 26 21:23:55 on ttys006
sys171064:~ OH$ sudo fsck -fy /dev/disk15s2
Password:
/dev/disk15s2: No such file or directory
Can't stat /dev/disk15s2
Can't stat /dev/disk15s2: No such file or directory
sys171064:~ OH$
So, I will now restart my MacBook Pro with Mac OS X 10.6.4 Install DVD, and go :
—1 in *Disk Utility* ;
—2 in Terminal (with *Cmd + s*).
I'll *note all* what I see, and then write you what I found.
You'll be nice to tell me if there's a way, in these conditions,
a) to *save Disk Utility log* ; or/and
b) to *save Terminal Output(s)* (.txt) ; or/and
c) to *take and save screenshots*, ; or/and
d) to *print anything*. (?)
as I don't know how it's possible to save these informations.
Thank you once more for your help. I'll do things now, but as it is 23:02 here in France, maybe I won't write you till tomorrow.
But, if you can answer to a), b), c) or d) above, post it to me please, because I'll go back here tonight.
And, also, *but I don't want to bore you*, I'd like to learn how to *copy and paste parts of messages* as you did, and how to *insert a Grab item (.png)* in a discussion, because an image is better than thousand words (that's what we say in France, but I'm sure we are not alone on Earth — like in the Universe).
With my best regards
Vialatte

What is the Id of navigation button?

Hi all
I need to know what is the ID of the navigation button which allows navigation between records using the UDO. (the button appears at the top toolbar)
thanx in advance
Yoav

Hi Yoav,
these are the id's of navigation buttons -
First Data Record     - 1290
Previous Record     - 1289
Next Record     - 1288
Last Data Record     - 1291
Hope you will got your solution.

What is the reference for unplanned goods issue?

Hi,
Gurus
I have qurry on material issue .
normally we issue the material to the production order through Picklist.here it is the planned issue.up to here it is ok.
But if we want extra material against prod.order which is not in prod. order,we are not getting the reference like sales order.
also management is interested in the material like this which issued as unplanned.how can we do it?
Sir its very urgent.
Regards
vilas

hi,
shrikant,
no that is not my qurry.
in our scenario our store person see the hard copy of picklist,and then he ll issue the material to production order.here up to this it is ok.
but suppose at the last moment if they required some extra material for that particular fert item for that order,but that extra material is not in std bom.then what ll be the subseqent document ,on that basis store person ll issue the material.becos that material ll not be in std pick list,becos that ll be unplanned issue.
regards
vilas

4s iphone will not recognize Yahoo or juno only gmail what is the secret also what is the I cloud nonsense about?

First I never used an apple product in my life.. so I would appreciate assistance that recognized that issue.
Just go 4S iphone but first only using on WiFi
my android and XP stuff and even vista works fine.. so this is not a WIFf issue.
I am only able to set up Gmail
Yahoo does not work or Iphone will not pick it up.. and I went to an apple web page that had information
that I tried to load on the Iphone but Iphone will STILL not recognize Yahoo.
The dumb thing keeps saying my password is wrong... Funny I have not problem using the same
password on with my DESK top Xp and it WORKS> so it is not a password issue.
Same **** thing with JUNO.
I tried using POP.JUNO.COM and 110 and SMTP.JUNO.COM 587
and still the 4S Iphone refuses to work.
Yahoo too used IMAP.MAIL.Yahoo.com 993 SMTP..MAIL.YAHOO.COM 465
Still nothing........?
On web this seems to be a big problem....
What is the secret handshake I need to know to get operational????
I have spend days on the web and found no answers.

Anyone? Has anyone had experience with this problem? I've reset the extending Airport and reapplied the settings and still have the same problem.

What is the code to make something STAY on the stage? Also, some button issues.

Similar Messages

Maybe you are looking for