What is the communication technology for 3D Active shutter?
Hello,
I purchase Toshiba 3D screen 46tl438, the TV supplied with two active 3D glasses model: FPT-AG02G.
I look pretty much everywhere (including the manual and on the glasses themselves) what is the communication technology? IR, RF or BP?
I also try in Toshiba web but with no success.
Thanks in advanced,
Kobi
I think its IR because the module is placed in the middle of the glasses and the same info about IR can be found on other webpages.
Similar Messages
-
What are the pre-requisite for JAVA Proxy communication?
What are the pre-requisite for JAVA Proxy communication?
Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d -
What are the pre-requisite for ABAP Proxy communication?
What are the pre-requisite for ABAP Proxy communication?
hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy -
JSF - Tomcat security...what is the best choice for a high activity site
JSF - Tomcat security...what is the best choice for a high activity site
The JDBCRealm is not multithreaded so what are options for high activity site??
I would like to have Apache as front end doing load balancing, Tomcat as server and JSF.
All ideals and suggestions please.
Thanks
PhilOne more question.
Since Tomcat has this setup.
create table users (
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
create table user_roles (
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key (user_name, role_name)
It seems like a huge pain to keep a user with every role. What happens when you have 500,000 users???
Also, the authentications on every page....would it be easier to login once and setup a session bean check that on with the page header ??
Thanks
Phil -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar -
Hi
I am trying to create sites programmatically in O365 SharePoint Online. So, just want to know that can we create a DeveloperSite ?? what is the template code for it viz. Team site- STS#0, etc
If possible provide me the MSDN link where I can refer for available site templates for O365 SP Online sites creation.
Thank youhttp://community.office365.com/en-us/f/154/t/61145.aspx
Are you meaning to create sites on SharePoint Online by invoking web services in your own program? SharePoint Online indeed provide some web services for custom programming, however, the web methods for creating a new site seems not included in them. Here
are some resources for the development of SharePoint Online for your reference:
SharePoint Online for developers
http://msdn.microsoft.com/en-us/sharepoint/gg153540.aspx
Code example for SharePoint Online: Accessing Web Services
http://code.msdn.microsoft.com/office/SharePoint-Online-0bdeb2ca
As to create a site collection, the parameter "Template" is the name of the template you want to use, as to find the name of the custom site template, you can use the powershell command "Get-SPOWebTemplate",
it will list all the templates with the names.
Note, The Template and LocaleId parameters must be a valid combination as returned from the Get-SPOWebTemplate cmdlet.
Also check
http://stackoverflow.com/questions/21268629/creating-new-site-collection-in-office-365-from-an-app
If this helped you resolve your issue, please mark it Answered -
Help Me.
What is the best solution for this problem ?Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
Users are having issues w/ the community page for pa.
It seems other users are having issues with accessing the community page for pa, as noted on
URL: http://www.dslreports.com/forum/r22862991-Any-else-out-there-having-issues-w-the-community-page-4-pa
Title/Location: DSLR (dslreports.com) Forums -> US Telco Support -> Verizon -> Verizon Fiber Optics -> Any else out there having issues w/ the community page 4 pa?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.This is what I told at the online chat..
Richardo: if some people can get to both URLs and others can only get to the new one that could be that the old one is being done away with or if not that then it would have to be the setting for those computers that are not getting to the old one.
Me: Like what kind of settings?
Me: I have, as you may know, A Static Public IP (IP, Subnet Mask, Default Gateway, and DNS Servers) as assigned by Verizon.
Richardo: that would be the settings within the browser.
Me: like cache, or proxy server for example... ?
Me: connection setting
Me: You do not need to tell me where these settings are, just what type of browser settings...
Me: Please, and thanks.
Richardo: the security , cookies, temporary internet files
[EDIT] My appolgies for Cross posting.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
What is the best resource for Discoverer novice.
I need direction in this tool. what is the best resource for me to use.
Hi Ade
You could do a lot worse than get hold of a copy of the Oracle Discoverer 10g Handbook that I wrote. It will walk you through much of what you need to know. You can find it on amazon.com or via a link from my website: http://learndiscoverer.com/books/books.htm
Another good resource would be a training class in either the Admin tool or End User tool or both. Oracle Corporation offer excellent training as do many other companies, including mine. Just google Discoverer Training.
Further resources are the Oracle By Example series on the OTN forum. These are free. You will find the Discoverer lessons here: http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/index.html
Other resources, such as blogs, abound on the web too. Here are some:
Oracle BI Blog: http://oraclebi.blogspot.com/
Mark Rittman: http://www.rittmanmead.com/blog/
My Blog: http://learndiscoverer.blogspot.com/
Best wishes
Michael -
What is the best laptop for Photoshop Elements 10 ?
I have HP Pavilion g6 Notebook,i5-245M 2.5GHZ, 4 GB mwmory, 64-bit Operating system window 7, Radeon Graphics, Eidtior not working , I get error message ( Unable to continue because of hardware or system error,Sorry,but this error in unercoverable).
So I want to give this one to my son, and I want to bay new One for me,
but i do not want to have same Error with my new Laptop,
So any one know what is the best Laptop for PhotoShop Elements 10 ?
Thanks for Helping me .I would suggest a machine with a multi-core processor and plenty of storage as photo files take up quite a lot of room over time. Many laptops have a screen resolution of 1366 x 768 and whilst elements will run OK some menu functionality will be missing if the display is not at least 800 pixels in height. A resolution of 1600 x 900 would be much better.
Independent advice is best, such as Which, UK. You can get a trial membership for as little as £1 to access their recommendations.
http://www.which.co.uk/technology/computing/reviews/laptops/best-buy/verdict/ -
What is the best plan for me? *please read details*
My parents are getting me a 4S for my birthday but I have to pay for the plan.
- I live in Alberta
- I will use less than 500MB data
- I have many friends in different provinces I will be texting
- I never talk on the phone for more than 200 min a month
- I'm currently with Koodo
- I will be in Costa Rica for 4 months in the new year; I am probably gonna get a SIM card when I'm down there.
What's the best service provider, and what's the best plan for me?Thanks, Meg.
So would a Verizon device-only iPhone 5S still be the better choice if I plan to use GSM in the US (and not the CDMA part of the Verizon iPhone which would lock me to their service).
Ideally, if I had the device in my hand, I would like to use TMobile's prepaid plan (40$ for unlimited talk, text, and 500 mb of data). Upon getting the phone, couldn't I just discard the included verizon simcard (without my activation) and just pop in the TMobile SIM card since the Verizon device-only instrument comes with the GSM unlocked? ( In other words, I don't have to ask Verizon to unlock the GSM part of the iPhone 5S )
Also, if this is what my goal is (to use a prepaid Tmobile sim), I could just buy an unlocked sim-free iPhone 5S from Apple, right? I dont have to ask for a Verizon device-only iPhone 5S if I want nothing to do with Verizon or use their CDMA service? I'm guessing a device-only iPhone 5s (regardless of carrier label) is the same as unlocked sim-free iphone 5S? -
How to check the tran code for specific activity.
Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
RegardsHi,
try the TSTC table with SE16.
Hope it helps,
MG -
HT1430 what is the default passcode for an iphone4s?
what is the default passcode for an iphone4s. Mine has been restored to factory settings and my old pass code doesnt work
TimS60 wrote:
what is the default passcode for an iphone4s.
There isn't one.
TimS60 wrote:
Mine has been restored to factory settings and my old pass code doesnt work
Is this your Issue...
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
Maybe you are looking for
-
I essentially got my GL CS2 site into DW (I think they made the wrong choice if GUI is the main consideration). So, I was trying to set up a page for the first time, and drop in a few pictures. Well, now, whenever I open DW all I get is a spinning ba
-
Opening images in preview shows image for fraction of second and everything becomes grey (or whatever your default preview background color is) and if I choose multiple images, side bar shows up with same grey empty space and preview pane is also in
-
Migration from Windows to Mac:
Hello, I recently moved from WIndows and is very new to the Mac and so am not very sure how this thing will work. I have seen several posts on migration but it assumes one thing: that my Itunes Library Folder and My Itunes Contents are all in one dir
-
PureMVC, and the learning curve. Please share your thougths
Hello Everyone, So I have decided to get my head wrapped around the PUREMVC framework. It has been a week and yes some of it makes sense yet I still struggle with it. I would like to know if anyone else share the same sentiments as I do. I have been
-
Oracle-specific deployment descriptor
Hi all does anybody know how i can edit the oracle deployment descriptor while using JDeveloper 3.2 to deploy. I need to add an ejb-reference, wich has to be mapped in the oracle specific descriptor. I tried to do it manually but everytime when i dep