What is the connection between programs saplvo5t and the transaction va05?

hi all,
i really wonder that i have put a break point in a subroutine move_userfields in an include V05TZZMO and when i execute va05 transaction breakpont stops at this subroutine? How can this happen when the  program behind va05 is SAPMV75A.
Please help..

Hi Vijay ,
The transaction VA05 calls the FM <b>RV_SALES_DOCUMENT_VIEW_3</b> .
The main program of this FM is SAPLV05T and the include you are talking about is a part of this FM .When you see the debugger take  a look at the call stack and thing will be clear for you .
Thanks ,
Varun .

Similar Messages

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • Problem: Hotsync error message "The connection between your device and the desktop could not be establisthed."

    When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed.  Please check your setup and try again."
    Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
    Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time.  HotSync Manager will open the port when it becomes available."
    Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4.  I cannot change it to anything else.
    Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
    Tried rebooting both laptop and Palm TX.  Still can't Hotsync.
    Operating system: Windows XP Pro
    Post relates to: Palm TX

    You are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
    Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
    I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's.

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • Need help in establishing the connection between BO federator and Oracle DB

    Hi Experts,
    I am working on BO federator and now I need to establish the connection between BO federator and the oracle db to use this as the source for the federator,
    I know we need to download the respective oracle DB connect .jar file from the oracle web site and place it under the drivers section(folder) of the BO Federator.
    Now I need to understand what is/are the next steps I need to follow and what are the values for the following parameters which are required during establishing the connectivity while creation of data sources from federator end.
    Host Name:
    Port:
    SID:
    Schema:
    Please share the details, any help will be highly appreciated.
    Thanks with regards,
    Vinay

    Hi,
    Please find below details.
    Host Name: Server Name or IP Address (Oracle)
    Port: (oracle Server Port)
    SID:SID is a unique name for an Oracle database instance. -> To switch between Oracle databases, users must specify the desired SID <-. The SID is included in the CONNECT DATA parts of the connect descriptors in a TNSNAMES.ORA file
    Schema: no need to enter(Blank)
    Thanks,
    Amit

  • How to test the connection between DSD backend and DSD connector

    Dear all,
    I am configuring the MDSD scenario .. and i want to insure that my customization is correct
    How to test the connection between DSD Backend and DSD connector ??

    Hi Viren,
    The problem is:
    We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
    Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
    Thanks,
    RPK.

  • What's the difference between Java SDK and the Enterprise Edition?

    What's the difference between Java SDK and the Enterprise Edition? Are they both free?

    both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

  • What is the associatione between Star Wars and the WCUI Skin "New Hope

    Hi Guys,
       I am doing SAP CRM 7.0 through University SAP Alliance programme. Could you please anyone tell what is the answer for the following question
    What is the associatione between Star Wars and the WCUI Skin u201CNew Hopeu201D
    Thanks in advance
    Regards
    Saravanan.R

    Ok, I'll take a stab at it. Since you normally work with a single layer it probably is not as important. But it still can be important inder the right circumstances.
    Lets say you have a photo of a blue background with a green square and a blue circle. You want to move the two objects.
    Use the selection tools to select one of the objects, hit ctrl-j to make a copy of that section onto a new layer, then repeat for the second object.
    Now that each object is on it own layer, you are free to fill that original image with the background color
    Because the two objects are on their own layer and everything around that object is transparent, you can freely move the object around until it suites you.
    When you are done, if you wish you can flatten the layers again.
    Now this could have been done using the new layers button, but it creates an emty layer, so you have the extra step of copy and pasting the section to that new layer.
    Now image you work for a large company and you are doing a composite for a huge magizine that has over a hundred objects that your boss "says" are in the wrong location, and wants them moved asap as the magazine is printing by nightfall.
    By eliminating the extra copy/paste step with multiple layers the time saved can be huge.
    If you are creating new objects then duplication doesn't really make sense then so, each does have its place.
    Hopefully that sheds a bit of light and doesn't confuse things more. LOL.

  • What is the difference between partition-count and the number of caches?

    What is the difference between partition-count and the number of caches in Coherence? Are they same?

    Those are totally orthogonal concepts.
    For more, look at this thread where I answered your other related questions and explain this, too:
    Where can I find the accurate definitions of these terms?
    Best regards,
    Robert

  • HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

    I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Table having the link between  Clearing document and the Invoice document

    pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
    Thanx .

    Hi,
    You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
    Regards,
    Svetlin

  • BCT - how to find the difference between installed BCT and the newest BCT?

    Hi,
    How do I find the difference between installed BCT and the newest BCT?
    or find a description of the newest BCT?
    Thank you.
    - Gunnar

    Hi,
    Thank you for your answer.
    I am aware of the possibilities you mention.
    I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
    That is for example:
    If F&R business content has been moved from 3.x technology to 7.0
    If there is changes to the F&R content at all
    -> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
    The possibility to see that the only changes might be in the area of SAP HCM ...
    Thank you.
    - Gunnar

  • What is the difference between program RSWWWIDE and WORKITEM_WRI?

    Hi Team,
    Good day.
    I want to implement a daily housekeeping job for Workitems (BPE Workflow messages).
    As per my understand, I can use the programs below for this purpose.
    RSWWWIDE - can delete workitem with status (WAITING, READY, SELECTED, STARTED, ERROR, COMMITTED, COMPLETED, CANCELLED, CHECKED, EXCPCAUGHT, EXCPHANDLR)
    WORKITEM_WRI and WORKITEM_DEL - can archive and delete workitems with status CANCELLED and COMPLETED.
    With this, I have the following questions.
    1. Can anyone confirm if the above description of the programs are correct?
    2. If RSWWWIDE can delete workitems with status COMPLETED and CANCELLED, so what is the purpose of using WORKITEM_WRI and WORKITEM_DEL?
    Thank you in advance.

    Hi,
    Once more: Do not use RSWWWIDE. You can use some permanent and serious harm.
    If you really want to delete work items, then the only way (that makes sense) is through data archiving (transaction SARA) and using archiving object WORKITEM. Archiving relates to WORKITEM_WRI nad WORKITEM_DEL. But from my point of view, you should try to use the standard data archiving process (through SARA) instead of perhaps trying to call these programs directly, or?
    By the way, what is actually your requirement? What is your "daily housekeeping job"?
    Regards,
    Karri

  • I've lost the majority of the connections between my projects and items in the library (showing up as "missing files"). I've moved nothing. How can I reconnect? The items show up as missing in the library as well as in the "movie".

    I am using the version 10.0.9 which might have been an automatic upgrade from my original version.
    The majority of my connections between library items has been lost. The items show up as missing files both in the library and when I run my project. How can I re-estabish these connections?

    Did you try using the relink function?

  • How to configure the connection between AS JAVA and AS ABAP

    Hello,
    I have installed a SAP Netweaver 7.3 AS JAVA and I would like to connect this JAVA Instance with 3 ABAP Systems (ECC 6.0) .
    On help.sap.com I have found the following instructions: http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/0c4b428f96ab53e10000000a1550b0/content.htm
    Could you please advise, if the above configuration steps are OK?
    Or could you please help me with the exact procedure?
    Thank you in advance!
    Noemi

    Noemi,
    I'm not sure how exactly you want to use ABAP and Java so it is hard to answer your question.
    The link that you posted describes the steps to configure ABAP as a Security Assertion Markup Language (SAML) service provider. As a service provider, the AS ABAP enables you to off-load the authentication of users onto an identity provider. The identity provider enables you to federate identities across domains for Single Sign-On (SSO).
    Check the following wiki page for a good overview of all the ways that you could connect to ABAP
    http://wiki.sdn.sap.com/wiki/display/ABAPConn/ABAPConnectivityHome
    Regards,
    Ventsi Tsachev

Maybe you are looking for