What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
                                                                                    W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

Similar Messages

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

    What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

    Hello,
    Part number 614-0305-A
    Hope this helps.

  • What's the correct brightness setting for viewing iphotos

    What's the correct brightness setting for viewing photos accurately on iphoto.

    What's the correct brightness setting for viewing photos accurately on iphoto.

  • HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

    What's the correct email settings for the fastest email receiving on my iPhone 4s

    As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

  • What is the correct Page Width for Mobile Device???

    Hi All
    Just have a question that "What is the correct Page Width for Mobile Device???"
    Is the Default 380px width is right? or 320px?
    Because the average smartphone is having resolution is 320X480 pixels...
    also in this video http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-designing-for-mobile-devices/ Dani Beaumont created the Mobile version website in 320px width (If you watch the video carefully you can notice the page width is 320px)
    And if the default page width 380px taken, will it be displayed correctly on every smart phone (average & high end)?
    please reply if you have any suggestions

    HI. I have designed a mobile web site that is currently 450pixels wide. This is the first one I have done. When it displays on some mobile phones, the width of the entire page is scaled down and it only fills about 1/2 of the width of the mobile phone with a whole pile of mrgin to the right. Is this because I should have designed it to be 380 pixes wide or have I done something else wrong. The test site is at:
    http://ancasterdental.com/muse/phone/index.html
    Please help me if you can. Thank you.
    john.

  • What are the post installation steps for sap 4.7ee

    what are the post installation steps for sap 4.7ee

    Hi,
    Post installation steps are as follows.
    1.SICK to be run first to checkt the errors while installation.
    2. Install SAP GUI
    3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
    4. Change the default password of SP* and DDIC.
    5. Set up the operations mode using RZ04 and SM63.
    6. Apply patches through SPAM.
    7 Schedule default background jobs through SM36.
    8 Import default profiles through RZ10.
    9. Schedule backup calender through DB13.
    10. Create clients using SSC4
    11. Install lisence
    12. Schedule SGEN

  • What is the benefit of up grading from ATI Radeon 1900 to ATI Radeon 4870?

    What is the benefit of up grading from ATI Radeon 1900 to ATI Radeon 4870?. Will the average user that does not use video game see the difference? What programs would I see the benefit in?
    Thanks!

    Installing 3 NVIDIA GeForce GT 120 will allow you to use up to six monitors. Installing the Radeon 4870 will give you some benefits in certain video/graphic editing programs. If all you do is email, web surfing and non-graphic intensive stuff than the NVIDIA GeForce GT 120 is adequate.

  • What would you replace an ATI Radeon 9800 Pro (256MB) with?

    Hi,
    I started a thread before asking whether I could replace a 256MB card with a 128MB card, even though the interface was a different shape.
    But, as I know so little about Macs and graphics card, it seems wiser to ask
    What would you replace an ATI Radeon 9800 Pro (256MB) with?
    The computer is user for photo editing and normal internet/email use.  The photo editing is done on Adobe Photoshop for professional treatment of photographs.
    The computer is a Power Mac G5 (1.6GHz) and budge is £80 / $120.
    Thanks in advance, Franc.

    Hi-
    Please check my recommendations in your other thread.
    Better options for the 9800 Pro are the Radeon 9800 XT, Geforce 6800 GT, Geforce 6800 Ultra, or if one has the money or finds a good deal, a Radeon X800 XT.
    For your budget and uses, the Geforce cards are a performance value buy.
    BTW, I have owned all of the cards, used all of the cards, and tested all of the cards.
    Graphics Cards- ATI and Nvidia
    See my testing pages starting here:
    Page 1: Open GL

  • Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

    Hi,
    I am trying to help a friend whose graphics card has bust.
    The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
    I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
    Can I just swap them over?  The connectors are not identical according to the photographs.
    Thanks.

    I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
    I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
    I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
    eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced  when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
    Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
    Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
    At the time of writing, the display has been up and running for a couple of hours and all seems fine.
    Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • Will the following ATI Radeon 9800 Pro work on a G4 MDD?

    I have an ATI Radeon 9800 Pro, 128MB DDR, and I'm wondering if anyone can verify if it will work on a G4 MDD. It was bought for a G5, but that G5 doesn't exist.
    Embossed on the front of the card it says:
    PN: 109-a14400-01
    On the back there are 3 stickers:
    1) J53480YRQ74B 603-4070
    2) SN + PN: 102A1440103 000009
    3) J53480YRQDMA 630-4908
    On the metal back-plane it has etched: 805-5422-A
    The card has 1 ADC connector with 25V/4A Max written beside it, and one DVI.
    Google brings up some hits, but nothing definitive concerning G4 vs G5.
    Thanks in advance!

    If it looks exactly like this one, including the "teeth" along the bottom, it won't work in any G4.
    This card has an "AGP Pro" connector, which gets all of its power through the slot (it has no molex connector).
    Even if the card was cut to physically fit in a G4, the AGP slot in a G4 (any model) can not provide enough power for a 9800. It would fry the G4, the card, or both.

  • Nvidia GeForce4 Ti 4600 or ATI Radeon 9800 Pro for G4 "Sawtooth"?

    Which video card would be the best 2x AGP upgrade for a G4 "Sawtooth" that sometimes uses Photoshop 6 in OS 9 Classic mode, an Nvidia GeForce4 Ti 4600 or an ATI Radeon 9800 Pro (or something else)?
    Sincerely,
    John

    Hi-
    Boot to OS 9 and the Geforce is better.
    In OS X Classic mode, the 9800 is better.

  • What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

    I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
    This question was solved.
    View Solution.

    Good question.
    That I don't have a definite 100% answer to.
    It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
    You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
    Paul

  • What is the correct wireless driver for x31 type 2672-phh ?

    Do i have to install a wireless network driver first ? What is the correct driver for a x31laptop type 2672-PHH ? Is it the "6hwc05ww.exe" ? Its not working for me. A command prompt just pops-up and saying something "kill_app.exe" and "inst_app.exe" then it just disappears. What is the correct driver ?
    Message Edited by kleinski23 on 06-23-2009 03:01 AM

    Hi and welcome to the forum pythonscript!
    If it's driver issue then you should see yellow marks in the device manager, your post doesn't say so, but let's start with the driver. Your system has ThinkPad card and following is the correct driver that needs to be installed for your wireless card:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701
    There is a hardware wireless radio switch on your SL410, make sure it is turned on too.
    Keep us informed.  
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • DNS OK but MX not working

    Hi Guys, Apologies for my lack of understanding about all things DNS and thanks in advance for any assistance you may be able to offer. I cautiously followed the instructions here: http://forums.adobe.com/docs/DOC-1741 and here: http://helpx.adobe.co

  • My email (gmail, actually) has been crashing on my ipad for days! There are over one hundred emails that I haven't been able to see!! HELP!!!!

    Hi! I am hoping someone out there has an idea of what I can do to end this recurring problem! It happened before, when I first did the latest upgrade...but, it seemed to resolve itself...now, it happened again!  This time, it has not resolved...now,

  • Disk Utility not finding Hard Drives after Updates

    Howdy; Updated my B&W G3 to 10.4.4 and itunes 6.0.2. After update and restart, ran Disk Utility (DU), which seem to just get into a loop "Gathering disk data". Force quit DU and tried running from Tiger DVD, but similar story. I have done a little re

  • B2B Inbound Error : Need Clarification

    Hi All, I would like to illustrate a particular use case for B2B Inbound Errors and if there is any workaround available to get over the problem. We are using B2B version 10.1.2 Use Case Details</strong1. Consider the scenario wherein we have a Inbou

  • Query special access

    Hi Friends, I have created a Bex Query. I will would like to give access to this Query to only one user. How can i do this. I am not allowed to put this Query in any roles. I am planning to save this Query in User Favorites. How can i do this.?? Than