What is the correct model no Bluetooth card for early 2005 G5

Hi, Could someone please tell me the correct model no Bluetooth card for an early 2005 2.0Ghz Duel Processor PowerMac G5 (Serial CK5300SCRTY), i have two model no's but am confused about the correct one, one is A1115 and the other is A1044.
Also is the correct Airport Extreme card model no A1027 for this mac?.

Airport Extreme Card (Europe, Asia, Australia) PART NO: M8881Z/A, Model No. A1027
Apple Bluetooth Card for Early 2005 G5, PART NO: 922-6784, Model No. A1115
Apple Bluetooth Card (REV 3) for G4, iMac, eMac, G5 (through late 2004) PART NO: 922-6876, Model No. A1044
Do not confuse the G5 A1115 with the Mac Pro A1115.

Similar Messages

TS4000 What is the "correct" date and time settings for icloud reminders?

What is the "correct" date and time settings for icloud reminders?

Sep. 18th. We don't know what time.

Flash player? my iMac crash if I watch tv on it and forget to close my Mac? What is the correct model of Flash Player and where I can get it?wand

file://localhost/Users/Tuula/Desktop/21042012158.jpg
This photo shows, what hapens, if I forget to close the tv-programe after watching it.
What is the correct version of Flash player I need to my iMac?

Check the Flash installed here;
http://www.adobe.com/software/flash/about/
If the installed version is not up-to-date, there is a link on the page to download and install the latest version;
http://get.adobe.com/flashplayer/

What Are The Correct Gray OS X Discs For This Imac?

I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

Liquidus wrote:
I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
-Brian

What is the correct boot camp support driver for late 2009 Macbook for windows 8.1

I have late 2009 Macbook with OS X 10.9.4. I want to run boot camp for windows 8.1, but unable to due to the fact that it can only run Windows 7. What is the correct Boot Camp Support Software so that I can run Windows 8.1?

Thanks for the info, but unfortunately there is no current support software or update for my issue at this time. I found the information under Boot Camp: System requirements for Microsoft Windows operating system. Hopefully Apple will fix this issue promptly!

What is the correct firmware update check URL for a Westell VersaLink 327W?

Hi, I was wondering what the correct URL is for the modem to check for updated firmware on the Westell VersaLink 327w. My model is the D90-327W15-06 and its current firmware is 04.04.03
To clarify, I'm looking for the URL that goes in the box at the top of the upgrade page in the router's advanced settings. That link is a screenshot of what my page currently looks like.
Since I first got this modem 2 or 3 years ago, it has never been able to properly check for updates. I've tried changing the URL to point to the Verizon support page for manually downloading the firmware but that doesn't seem to work either. I'm guessing the URL should point to a specific file, possibly an xml or something? I don't remember what the original address in the box was but it didn't work anyway.
I'm pretty sure I am running the latest version (04.04.03) and manually upgrading isn't a problem if a new version comes out but its always bugged me that the built-in check has never worked right for me so I figured I'd ask on here for the heck of it. At the very least I'd like it to be able to check version information even if it can't upgrade automatically.
Does the built-in firmware check work for anyone else using the 327w or similar model? If so, could you kindly copy/paste the URL on your modem's firmware page? Even if you have a different modem, it might help me figure out the right address for my own. Thanks!

#1 Go to http://www.verizon.net/central/vzc.portal?_nfpb=true&_pageLabel=vzc_help_contentDisplay&linkflag=use...
#2 Make sure that use save as.
#3 After you save the file, go into your router's upgrade screen.
#4 Then use the file that you downloaded earlier to upgrade the router..
If you have any questions as how to do this..
#1 Be sure to take screen shots.
#2 And be sure that you use tinypic.com as your image host.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

What are the correct Premiere Pro CS4 settings for producing WMV/MP4 to FLV/F4V videos?

Greetings.
I have recently purchased CS4 Production Suite. My task is to convert WMV/MP4 videos to FLV/F4V videos that contain titles, transitions, and credits for streaming from Flash Media Server.
My test videos are experiencing audio sync issues when using Adobe Media Encoder as the export tool. When I use Flash Video Export tool using the source WMV/MP4, I do not experience sync issues.
I can control the WMV/MP4 output settings since we record our own sessions using Windows Media Encoder. I can also utilize Flash Media Live Encoder to capture the source.
The video source comes from a video capture card (Osprey) that is connected to an IP based camera(s) which are controlled by video technicians.
We record from that capture card into WMV format.
My question is, what are the settings in Premiere to produce FLV/F4V for streaming in 480p quality?
I am new to video production and gladly appreciate any assistance.
Regards,
Shack

Classification: UNCLASSIFIED
Caveats: NONE
Jim,
Thank you for your response. I am a total noob at video, but have the requirement to produce recorded video to our FMS servers.
Here is my situation. We have classrooms and auditoriums hard wired with IP cameras. Our video techs can record to DVR and then finalize to DVD (VOB). We also have a control center that can capture those cameras using Windows Media Encoder to record.
I have been given CS4 to produce these videos. Each time that I transcode, the audio gets out of sync. I am trying to figure out a suitable way to take VOB and WMV files into PP and output to FLV/MP4.
Appreciate any advice...
Shack

What is the correct version of DVD Player for OSX10.3.9?

I just replaced the Sony combo drive in my G4/Quicksilver with a Pioneer DVR-116D, but for some (or no) reason, I do not have the DVD Player application. When I search on the Apple site, I only find version 4.6, which is for Tiger and version 3.1.1, which is for Jaguar.
Hopefully someone can point me to the correct version for Panther.
Thanks,
Jon

Welcome to discussions Jonathan,
The DVD Player that come with Panther is version 4.0 as is part of the iLife package that comes with your installation CD's.
You can reinstall it from the installation CD using Pacifist
And to avoid any problems in using it, read the documentation here:
Pacifist Documentation

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

Best bluetooth card for early iMac G5 (2004)?

I've recently bought an iMac G5 without a bluetooth module. My understanding is that the following bluetooth cards would work with my iMac are:
-A1115
-A1044
I was wondering if anyone could advise me on which to buy?
Is one better than the other?
Thanks.

You may be able to find what you need in the [DIY|http://www.apple.com/support/manuals/imac> manual appropriate for your model. However, I think that the BT module is soldered to the motherboard and is not user replaceable. Get an external dongle, which will work just as well.

HELP For Replacement CPU PowerMac (970 V.2.2) What is the correct model?

Hallo!
I have a question for you!
I have a PowerMac G5 (2003) with cpu PPC G5 970 (v.2.2) 2GHz as seen in System Profiler;
My Mac is a Dual processor, but one CPU is brocken and today it runs with only one CPU.
Now I want to buy the second CPU in ebay, to replace the second CPU broken, but I can't find nothing of clear in apple part number, in fact I Have a CPU 630-4890.
Reading service manual I think that I must search a 661-2901, but i don't know if this is correct!
There is someone that can help me in this choice?
Thank a lot!
Paolo

Look at the model number like the other member said to do . But it you change out the cpu yuo need to re calibrate the fans on it . You need the dvd that will re calibrate the fans for the new processor . The apple service diagnostic disk or better know as the thermal calibration of the fans . Thats a must or I think you will burn up the new processor .
get a service manual plus the disk I told you about . Goto ebay for that .

What's the correct way of preparing artwork for print in Illustrator?

I want to print an illustration on 8.5in. x 11in. paper. Whenever I print, the artwork always fills the whole page and all of the artwork doesn't show. So I created a new document and these are the settings. Are they correct? Thanks in advance.

Your new document setting are correct, CMYK & 8.5 x 11.
Unless you have borderless printer you cannot print to the edge of the paper. This keep from toner getting into the printer and one side is usually the shortest so the gripper can grab the paper. Usually this is only about 1/8" around and one side about 1/4".
If this does not help, can you please provide a measurement of how much is missing and describe where it si your are determining all of the artwork does ton show, is this in the print window or other.

For EOS Rebel SL1 what is the correct wired remote shutter/timer?

I'm looking at getting a Rebel SL1 for someone. She'll want to do long exposures(bulb). What is the correct model of wired remote timer? The website shows the RC-6 (which seems to just be a wireless shutter) but not the wired remote. The instruction manual shows a jack but doesn't indicate what model remote or what time of jack.

For wire shutter release, you'll need the Canon RS60-E3
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=70561&Q=&is=REG&A=details
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

What is the best model laptop that 9.2.2 can start up on?

I'm looking to buy an old laptop that starts up Classic 9.2.2 like the iMac G3 does and can also run a version of OS X (at least 10.3.9). Would those be Powerbooks or iBooks or both? What is the fastest model I should look for?

Click here. All of the iBooks which fit those criteria are G3s.
(62248)

I can't get my Epson Stylus SX438W to work. Has anyone had trouble finding the correct model when installing the driver?

I am having trouble completing the installation of my new Epson Stylus SX438W Wi-Fi printer. The printer is connected to my network and so is my Mac. I have put the Epson software disc in the Mac and followed the procedure to installing everything that is needed. I am stuck at a point that Epson have not been able to help with, and as advised to ask my router provider whether it does MAC filtering. It does not apparently. Then i have been advised to contact Apple. So that's where i am. The problem is that at the point where i have to add the printer to the printer list the correct model does not show in the provided list, so i hit the "more printers" tab. Not in here either. Epson have guided me through the installation of the latest driver and the prinnter still, does not show up in any lists. We have tried setting it up manually (i believe!, i am far, far from really knowing at all what i am doing). When trying to print a document from Microsoft word all that comes out is jargon on the sheets. Obviously not what i am after. I realise my description may be very unhelpful to you but i am REALLY stuck i don't know what to do now. Any help or guidance will be greatly appreciated.
P.S. i have attached an image of the screen i have got to if that is of any help and i can get more screen shots etc. if anyone needs them!

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

What is the correct model no Bluetooth card for early 2005 G5

Similar Messages

Maybe you are looking for