What is the correct Page Width for Mobile Device???

Hi All
Just have a question that "What is the correct Page Width for Mobile Device???"
Is the Default 380px width is right? or 320px?
Because the average smartphone is having resolution is 320X480 pixels...
also in this video http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-designing-for-mobile-devices/ Dani Beaumont created the Mobile version website in 320px width (If you watch the video carefully you can notice the page width is 320px)
And if the default page width 380px taken, will it be displayed correctly on every smart phone (average & high end)?
please reply if you have any suggestions

HI. I have designed a mobile web site that is currently 450pixels wide. This is the first one I have done. When it displays on some mobile phones, the width of the entire page is scaled down and it only fills about 1/2 of the width of the mobile phone with a whole pile of mrgin to the right. Is this because I should have designed it to be 380 pixes wide or have I done something else wrong. The test site is at:
http://ancasterdental.com/muse/phone/index.html
Please help me if you can. Thank you.
john.

Similar Messages

HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

What's the correct email settings for the fastest email receiving on my iPhone 4s

As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

Hello,
Part number 614-0305-A
Hope this helps.

What's the correct brightness setting for viewing iphotos

What's the correct brightness setting for viewing photos accurately on iphoto.

What's the correct brightness setting for viewing photos accurately on iphoto.

What are the best AirPlay speakers for Apple devices?

What are the best AirPlay speakers for Apple devices? I would like to get some good speakers to be used with my iPod, iPhone and iPad. Ideally, they should be able to play using AirPlay and be quite powerful, but with a good design if possible.
I am particularly interested in the Fidelio range of speakers by Philips.
Thank you for your help in advance.

Best is going to be a matter of opinion. What environment are the speakers going to be used in? How large is the room? What type of music are you going to play? What features/functions would you like in the speakers? What price range are you looking for? All of these are going to effect which speakers will best fit your needs.

What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.

Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

What is the correct wireless driver for x31 type 2672-phh ?

Do i have to install a wireless network driver first ? What is the correct driver for a x31laptop type 2672-PHH ? Is it the "6hwc05ww.exe" ? Its not working for me. A command prompt just pops-up and saying something "kill_app.exe" and "inst_app.exe" then it just disappears. What is the correct driver ?
Message Edited by kleinski23 on 06-23-2009 03:01 AM

Hi and welcome to the forum pythonscript!
If it's driver issue then you should see yellow marks in the device manager, your post doesn't say so, but let's start with the driver. Your system has ThinkPad card and following is the correct driver that needs to be installed for your wireless card:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701
There is a hardware wireless radio switch on your SL410, make sure it is turned on too.
Keep us informed.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

What is the correct part number for an iPhone 3g battery

It seems there are many different APN's for iPhone batteries. What are the proper part numbers for the 3G and 3Gs? Does it matter what the iOS is?

The only supported source for iPhone batteries is Apple. Take it to an Apple store and they will replace the battery for $79. There are no officially supported batteries available from other sources; all of them are aftermarket replacements. The version of iOS doesn't matter. If you really want to install an aftermarket battery go by the reputation of the seller; that's the best you can hope for. Note that if you replace it yourself Apple will no longer service or support your phone.

What is the correct charger W for my mac?

My charger just died.
It is already 2nd on my old but faightful mac A1226 SantaRosa 15inch.
My Question is: What is the correct charger Wats?
There is a lot 45, 65, 85W, but which one is mine?
Original I had was 65, then I read that it shall be 85W coupe of years ago, so I had 85W. Now I am going to buy another one and I am still confused wth that as many yeas before or even more.
Any suggestion?
Thanks,
Dali

"Original I had was 65"
You can buy either the original, or one with a higher wattage.

What is the correct fsck syntax for issue with invisible disk ?

Hello everybody,
My problem actually (I also have a problem with the 17" Install DVD) is to repair *3 disks* with *fsck command*, as the filesystems are damaged. I phoned Apple Assistance Saturday, for about 30 minutes, but finally the Advisor sent me a link to one of their thousands (and sometimes obsolete) articles, and the solution wasn't there entirely.
I'll describe you the problem :
One of my USB external disks (4TB data) *doesn't appear* after Startup, but when I use the Install DVD and Disk Utility, the application tells me it's OK, that the disk "SEEMS" to be alright etc. That's false.
When I reboot with *Cmd + S* (root level), and tell Terminal (I have been obliged to print the four states of an American Extended keyboard) :
"sudo fsck -fy /dev/disk4s1"
the reply is :
"BAD SUPER BLOCK: MAGIC NUMBER WRONG
LOOK FOR ALTERNATE SUPERBLOCKS? yes
SEARCH FOR ALTERNATE SUPER-BLOCK FAILED. YOU MUST USE THE
-b OPTION TO FSCK TO SPECIFY THE LOCATION OF AN ALTERNATE
SUPER-BLOCK TO SUPPLY NEEDED INFORMATION; SEE fsck(8)."
So, I use the *-b option* of *fsck command*, and :
"fsck: -b flag *requires a number*"
"-b size Specify the size, in bytes, of the physical blocks used by
the -B option."
So, I'm searching *since 3 days* (and *I'm learning a lot*, but nothing, of course, concerning my problem) the full info command to know *what sector address* I have to tell to -b to install an alternate superblock, because I need to know exactly at which places filesystems and *data start* and end.
You understand, I suppose, that I can't use any of my softwares, because the disk is INVISIBLE (doesn't exist) after normal restarting.
It's not MOUNTED nor UNMOUNTED.
It exists (very well, thank you) when rebooting *with Apple Install DVD*.
I'm under *Snow Leopard 10.6.5*, and I don't know if, perhaps,
*there wouldn't be a problem* (or more) with this update ...
That's what I've seen, in any case, on other places here,
about several different issues.
Please, Bob, Gary, Camelot, etresoft, Bill, Jun, Nils, Cole, Charles, Michael,
gimme some help !
If someone has the full solution, a beginning of solution,
or a path to solution,
thank you very, very much in advance !
With my best regards
Vialatte

Dear Camelot,
First, thank you very much for answering me and try to help me ;
Secundo, please read, if you have time, what I replied to Bill Scott,
and I have to thank you also for your slightly better contribution and understanding.
Some words of what I've replied to him are written for you too :
"I type *sudo fsck -fy /dev/disk4s2* (not s1, of course, and *Camelot is perfectly right*, having remarked this mistake, as *s1 is dedicated to partition map* volumes).
There's also *a strange thing* with Disk Utility when starting from DVD :
it doesn't display the s1 volumes as usual."
As you've read it in my reply to Bill, it's a *complicated issue* and *Apple has no response*.
You tell me : "+Good luck with that.+" It starts badly.
"+It's been a long time since I've had to deal with superblocks+"
I totally ignored their existence …
"+- they just don't come up any more,+" What is the meaning of this sentence ?
"+but I don't know any way of recovering the superblock address after a disk has failed.+" That's the matter of my question : *Is it a failure ?*
"+Typically (at least, historically) you get the superblock addresses in advance, storing them somewhere safe until you need them.+"
That's a total discovery for me.
You tell me then : "+Are you talking about in the Finder here?+" Yes and no, I talk about the Sidebar (see below), but it's part of the Finder.
"+Have you checked the Finder's preferences to make sure it's just not hiding external drives?+" I did, when you told me to do so.
"+Since everything else tells you that the drive is OK+" Yes, you're right, when starting from Install DVD, that's *very strange*, but remember fsck doesn't say *the same at all* as Disk Utility ... "+this just sounds like a Finder preference setting to me.+"
I'm sorry, it would have been wonderful. My settings are correct, that means :
NOTHING on Desktop, ALL (including Computer) in the Sidebar (and clicking on Computer allows me to check that *no volume* has vanished from Sidebar (it happens sometimes).
"+If it's not the Finder prefs, then please post the output of diskutil list in order to troubleshoot further.+"
Here it is (a little far below), but there's *none of the 2 4TB volumes* (yes, there are two disks missing now) here, because, as I already said that, they are invisible for the Finder and *Disk Utility*, and I think *it's the same for Terminal.*
You'll note there's *no BOOTCAMP partition* here (I removed it temporarly to solve this issue), and don't be afraid if there are several systems on the internal HD.
As I noticed it here and there, there are problems with 10.6.5.
So, I try to work with 10.6.4 (delivered with MBP 17"), but have also an universal 10.6.0 Snow Leopard, with which I can configurate 10.6 *at any state*.
Unfortunately, I *can't use* (it so that Apple decided to do) the DVD delivered with my 15" MBP (rejected by 17"), because it is with my MBP 15" that I formatted those disks.
*Another thing :* If I didn't want my wife *to install herself* (with me to help her) the 15" MBP I've gave to her (there's the 17" new 500GB 5400rpm installed in it by me), I would already have tried to connect these two 4TB, just to see.
Last login: Fri Nov 26 21:22:38 on ttys005
sys171064:~ OH$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *500.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Seagate 149.9 GB disk0s2
3: Apple_HFS System 17 64.9 GB disk0s3
4: Apple_HFS Sys171064 34.9 GB disk0s4
5: Apple_HFS For Alu Black System 149.6 GB disk0s5
6: Apple_HFS SL 10.6.x 100.0 GB disk0s6
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *16.1 GB disk1
1: Applepartitionmap 32.3 KB disk1s1
2: Apple_HFSX olivier_herrbach 16.1 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_HFS HSD 01 TM 600 Go 599.9 GB disk2s2
3: Apple_HFS HSD 01 400 Go 120.6 GB disk2s3
4: Apple_HFS DiskTools > Seagate ... 279.1 GB disk2s4
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk3
1: EFI 209.7 MB disk3s1
2: Apple_HFS HELP ÉNERGIE 1,5 To 1.5 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk4
1: EFI 209.7 MB disk4s1
2: Apple_HFS HSD USB 03 1To 999.9 GB disk4s2
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *32.0 GB disk5
1: EFI 209.7 MB disk5s1
2: Apple_HFS Patriot USB Key 32 Go 31.7 GB disk5s2
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk6
1: EFI 209.7 MB disk6s1
2: Apple_HFS WD USB 1,5 To 1.1 TB disk6s2
3: Apple_HFS WD 02 350 Go Seagate 349.9 GB disk6s3
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk7
1: EFI 209.7 MB disk7s1
2: Apple_HFS HSD USB 02 50 Go 49.9 GB disk7s2
3: Apple_HFS HSD USB 02 715 Go 714.6 GB disk7s3
4: Apple_HFS HSD USB 02 110 Go 110.0 GB disk7s4
5: Apple_HFS HSD USB 02 100 Go 99.9 GB disk7s5
/dev/disk8
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk8
1: EFI 209.7 MB disk8s1
2: Apple_HFS WD USB 2To 2.0 TB disk8s2
/dev/disk9
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk9
1: EFI 209.7 MB disk9s1
2: Apple_HFS FW 03 TM 2To 2.0 TB disk9s2
/dev/disk10
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk10
1: EFI 209.7 MB disk10s1
2: Apple_HFS FW 02 1,2 To 1.2 TB disk10s2
3: Apple_HFS FW 02 200 Go 199.9 GB disk10s3
4: Apple_HFS FW 02 CS5MC 50 Go 49.9 GB disk10s4
5: Apple_HFS FW 02 Leopard 50 Go 50.0 GB disk10s5
/dev/disk11
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk11
1: EFI 209.7 MB disk11s1
2: Apple_HFS FC 02 Time Machine 1.0 TB disk11s2
3: Apple_HFS FC 02 SL 1To 999.5 GB disk11s3
/dev/disk12
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk12
1: EFI 209.7 MB disk12s1
2: Apple_HFS FC 01A USB 1To 700.0 GB disk12s2
3: Apple_HFS FC 01C 300 Go Leo 299.9 GB disk12s3
4: Apple_HFS FC 01B USB 1To 699.8 GB disk12s4
5: Apple_HFS Leopard 125 Go 300.0 GB disk12s5
/dev/disk13
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk13
1: EFI 209.7 MB disk13s1
2: Apple_HFS FW 04 TM 2To 2.0 TB disk13s2
3: Apple_HFS eDrive 12.9 GB disk13s3
/dev/disk14
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk14
1: EFI 209.7 MB disk14s1
2: Apple_HFS FW 05 2To 2.0 TB disk14s2
sys171064:~ OH$
As you and I see, I strongly believe that disk15s2 and disk16s2 (with s3, s4, s5 etc. partitions) are missing.
I must find a way to prove what I say to you. Remember that we are not in the case where I use *Cmd + s* after rebooting with Install DVD, but under normal utilisation. What follows has no interest :
Last login: Fri Nov 26 21:23:55 on ttys006
sys171064:~ OH$ sudo fsck -fy /dev/disk15s2
Password:
/dev/disk15s2: No such file or directory
Can't stat /dev/disk15s2
Can't stat /dev/disk15s2: No such file or directory
sys171064:~ OH$
So, I will now restart my MacBook Pro with Mac OS X 10.6.4 Install DVD, and go :
—1 in *Disk Utility* ;
—2 in Terminal (with *Cmd + s*).
I'll *note all* what I see, and then write you what I found.
You'll be nice to tell me if there's a way, in these conditions,
a) to *save Disk Utility log* ; or/and
b) to *save Terminal Output(s)* (.txt) ; or/and
c) to *take and save screenshots*, ; or/and
d) to *print anything*. (?)
as I don't know how it's possible to save these informations.
Thank you once more for your help. I'll do things now, but as it is 23:02 here in France, maybe I won't write you till tomorrow.
But, if you can answer to a), b), c) or d) above, post it to me please, because I'll go back here tonight.
And, also, *but I don't want to bore you*, I'd like to learn how to *copy and paste parts of messages* as you did, and how to *insert a Grab item (.png)* in a discussion, because an image is better than thousand words (that's what we say in France, but I'm sure we are not alone on Earth — like in the Universe).
With my best regards
Vialatte

What is the correct XML request for ccm 6.0

Hi,
i m tring to get getphone-data from my ccm6.0 with a axl call.
here is what i have, which is a example out of the toolkit, i guess its old, so it doesnt work with my ccm6.0
xmlhttp.Open("POST", "http://" + ccmserver + "/CCMApi/AXL/V1/soapisapi.dll", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Content-type", "text/xml");
xmlhttp.Send(xmlDoc);
can anyone help me and share the correct lines for this request?
thanks

yeah.. my java programm with the soap call, which works fine, is using
http://myserver/AXL/
i tryied it in my jva-script, but its not working, i also tried https, but in both cases i dont even get an entry in the trace files..:-((
here is what i use in my java programm
sAXLSOAPRequest = "POST /axl/ HTTP/1.0\r\n";
sAXLSOAPRequest += "xxxxxxxxx:8443\r\n";
sAXLSOAPRequest += "Authorization: Basic " + authorization + "\r\n";
sAXLSOAPRequest += "Accept: text/*\r\n";
sAXLSOAPRequest += "Content-type: text/xml\r\n";
sAXLSOAPRequest += "SOAPAction: \"CUCM:DB ver=6.0\"\r\n";
sAXLSOAPRequest += "Content-length: ";
and in my java-script i tryied..
xmlhttp.Open("POST", "http://" + ccmserver + "/AXL/", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Content-type", "text/xml");
xmlhttp.Send(xmlDoc);
but with no success..:-((
can anybody help?
thanks

What are the correct parameter names for a JDBC pool connection?

Looking in the admin console I notice the differences in the properties name (type casting) of PointBasePool and __TimerPool pool connections properties and the create wizard properties.
PointBasePool and __TimerPool uses this name parameters: User,Password, and DatabaseName.
Create wizard uses these: databaseName, user, password.
So, then, what is the standard names for a connection in SOA8? What is the standard for JDBC?
For example, Tomcat 4 uses username, password, url, driverClassName as parameters names.
Please help,
This is getting more and more confising,
Thanks,
Lorenzo Jimenez

The properties that you specify when creating the connection pool are unique to the vendor.
Any or the properties that you specify user,password, url...etc we expect to have setters (setUser, setPassword, setUrl)
let me know if need more info

What is the correct rail kit for x4170 m2?

The x4170 m2 Sunfire server, despite numerous Oracle documentation claims to the contrary, is not designed to fit a 19" rack. The body of the server is only 16.75" wide, and the entire server, faceplate and all, will fit through the opening in a 19" rack without touching the mounting plate on either side. The railkit is advertised in various places as 350-1502-01, but the server side rails in that kit (I have one) won't attach to the sides of my x4170 m2 server - the pins and holes aren't even close to lining up. Does anyone know the part number for the correct kit to mount an x4170 m2 in a standard 19" rack?

X2380A [S]
Extended Length Rail Kit, 1200mm
371-4919 [C]
1U/2U Screw-Mount Slide Rail Kit
n/a
X6325A-N [S]
371-2740 [C]
1U/2U Snap-In Slide Rail Rackmount Kit, 730mm
n/a
X6326A-N [S]
371-2741 [C]
1U/2U Screw-Mount Slide Rail Rackmount Kit, 730mm
n/a

What is the correct icc profile for jpegs extracted from DNGs?

Are they always sRGB, or always something else? do they need an icc-profile assigned for colors to be interpreted properly? is the correct profile available as metadata that could be read using exiftool or such?

Profile/color space can be anything - there is a DNG tag called "PreviewColorSpace" that allows for:
0 = Unknown
1 = Gray Gamma 2.2
2 = sRGB
3 = Adobe RGB
4 = ProPhoto RGB
Good practice would be to attach an ICC profile to the preview, but I don't think there's any requirement to do so.
Sandy

What is the correct Page Width for Mobile Device???

Similar Messages

Maybe you are looking for