What is the correct procedure to install a TCS application not included in the initial installation?

I can go through the installation procedure to the point when I've switched to the 2nd DVD. Setup resumes and a few seconds later states that no application was installed.
I'm adding Captivate to my initial installation of FM9, Acrobat9 and Photoshop. I'm not uninstalling them first. Should I? Why?
The initial installation was a year ago. The OS is Windows 7.
TIA
Douglas

On 06/01/2011 10:12 PM, Jeff_Coatsworth wrote:
So you already have TCS2 but didn't install the full suite the first time around? So now you just want to add Captivate? I believe in that case you just select it off the list. The installer skips all the ones that you haven't selected and only does the one you have. I think Captivate is on the 2nd DVD (at least it was on the TCS2.5 upgrade one I got), so you may have to start with that one first.
  Yes, I just want to add Captivate. I've been successfully doing the  canonical installation (DVD1 > setup (autoplay wouldn't work due  according to the error message to a  Unicode error in the lang.dat file)  up to the switch to DVD2.
As far as starting from DVD2 is concerned, there's no setup file on it  to launch. So that route is out.
Another option (because some have reported issues with installing from DVD) is to copy the contents of both DVDs to a temp folder on your hard drive and start the install from there.
  Copying DVD2 to the HD might be a solution. Unless data is somehow  corrupted on DVD2, but in that case, why did the original installation  succeed?
Thanks again for your prompt answers.
Best regards,
Douglas

Similar Messages

  • The correct procedure to install PeopleTools 8.49

    Dear Friends,
    Hello. I am still not sure the correct procedure to install PeopleTools 8.49. I have done the following:
    Step 1: Install Windows Server 2003
    Step 2: Install MS SQL Server 2005
    Step 3: Install BEA WebLogic 8.1
    Step 4: Download 7 disks of PeopleTools 8.49 from Oracle e-delivery site
    Step 5: Install PeopleTools 8.49 using setup.exe located in Disk 1.
    Step 6: Setup PeopleSoft Database using C:\PeopleTools8.49\setup\PsMpDbInstall\setup.exe
    Step 7: Install Tuxedo using C:\PeopleTools8.49\appserv\pstuxinstall.exe
    Step 8: Install application server using C:\PeopleTools8.49\appserv\psadmin.exe
    Step 9: Install PIA using C:\PeopleTools8.49\setup\PsMpPIAInstall\setup.exe
    From Step 1 to Step 6, my system works correctly. But from Step 7 to Step 9, my system is not working correctly. Is the above procedure correct to install PeopleTools 8.49 in Windows Server 2003 ? Thanks.
    Lucy

    Nicolas,
    Thanks a lot for replying to me. I have 3 questions as follows:
    First, How many PeopleTools can be installed using 7 disks ?
    As I indicated in previous discussed, I have done:
    Step 4: Download 7 disks of PeopleTools 8.49 from Oracle e-delivery site and extract them.
    Step 5: Install PeopleTools 8.49 using setup.exe located in Disk 1.
    Step 6: Setup PeopleSoft Database using C:\PeopleTools8.49\setup\PsMpDbInstall\setup.exe
    In step 5, setup.exe in Disk 1 load all of files in 7 Disks into C:\PeopleTools8.49\ and PsMpDbInstall install PeopleSoft Database successfully. I can log into Application Designer and develop my first application successfully in 2-tier mode.
    Second, As you said in previous discussion, "Tuxedo is apart from PeopleSoft..." , do you mean I don't need to do Step 7: Install Tuxedo using C:\PeopleTools8.49\appserv\pstuxinstall.exe
    Third, I don't understand how to install the rest of PeopleTools using the files in 7 Disks. Are they application Server and PIA ? Thus, we do:
    Step 8: Install application server using C:\PeopleTools8.49\appserv\psadmin.exe
    Step 9: Install PIA using C:\PeopleTools8.49\setup\PsMpPIAInstall\setup.exe
    Lucy

  • What is the initial account and password  for BW IDES 7?

    Hi all:
         what's the initial account and password for BW IDES 7?
    Thank you very much!!

    sap* pass1234 or
    ddic password was set in install.

  • What are the post installation steps for sap 4.7ee

    what are the post installation steps for sap 4.7ee

    Hi,
    Post installation steps are as follows.
    1.SICK to be run first to checkt the errors while installation.
    2. Install SAP GUI
    3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
    4. Change the default password of SP* and DDIC.
    5. Set up the operations mode using RZ04 and SM63.
    6. Apply patches through SPAM.
    7 Schedule default background jobs through SM36.
    8 Import default profiles through RZ10.
    9. Schedule backup calender through DB13.
    10. Create clients using SSC4
    11. Install lisence
    12. Schedule SGEN

  • Batch user creation - what is the initial password?

    Hello experts,
    I'm trying to import a list of users using the batch import (User Administration -> Import) as described here:
    [http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm]
    I see that the users are created in the UME.
    What is the initial password for the newly created users?
    Can I specify this somehow?
    Best regards,
    Florian

    Hi Florian
    Please check the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
    and
    http://help.sap.com/SAPHELP_NW04S/helpdata/EN/f6/0edf3d0eb8af5ee10000000a114084/content.htm
    The link :
    http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm
    itself contains ample info.Please go through the UME instructions.
    Regards
    Chen

  • What's the Initial Charge time of MacBook Pro?

    I got my first Macbook Pro earlier. Tomorrow I'll be charging my mac, but what's the initial charging? Thanks.

    Charge it until it reaches 100% which at 100% it will stop charging all by itself. The leave it connected to the AC whenever possible and only run it on the battery when not near or convenient AC power source. If you leave it connected to AC most of the time let it run on the battery every week or so or once or twice a week to work the battery.
    BUT NEVER EVER Drain it down to zero. Recharge (connect to AC) at 20% or above if at all possible.

  • What is the initial iMac password?

    i just bought the i mac and i want to download the adobe flash reader, they asked for a password and i have none yet.
    what is the initial password?

    If you purchased a new iMac running Yosemite the initial setup asked for your Apple ID and password. That password was then used as the initial administrative account password. You can change the password in the Users and Groups section of the System Preferences.

  • When I started my PC this morning I got a pop-up message stating that CC has damaged files and required downloading. Indeed, CC did NOT work and subsequent attempts to download CC never got beyond the initial installer box. I am at my wits end here. Have

    When I started my PC this morning I got a pop-up message stating that CC has damaged files and required downloading from www.adobe.com/go/adobecreativecloudapp. Indeed, CC did NOT work and subsequent attempts to download CC never got beyond the initial installer box. The posted link also appears to be bogus I am at my wits end here. Have other users experiences this issue? Is this a clever intrusion?

    Please ensure you have the latest version of the Creative Cloud app installed
    http://helpx.adobe.com/creative-cloud/release-note/cc-release-notes.html
    We also have this solution for the having to sign in on every product launch
    http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    You can also try uninstalling & re-installing the CC.
    Regards
    Rajshree

  • My mountain lion upgrade is take long after the initial installation finish it is showing increasing negative number like -50 munites remaining

    My mountain lion upgrade is take long after the initial installation finished it is showing increasing negative number like -50 munites remaining while still saying installing os x on the disk.
    I mean it starting saying time remaining about 6 munites
    Now it up to time remaing about -55 munites
    I thing something is wrong with this installation and all I did is fallow the onscreen instruction
    Thank

    You might want to just manually power down your machine and, if necessary, start the installation process anew. You're unlikely to damage anything by doing this. It may have actually installed and is just hanging when it's supposed to reboot.
    Good luck,
    Clinton

  • Whats the correct procedure to installing/updating Audigy 2

    Hi all, I am terribly confused with all the updates.
    Is this correct?
    I install the drivers and software that came with my Audigy 2.
    Then I go to Creative site and download all the updates? Or just some? if so, which ones and how do I know which ones I need and which ones I already have or do not need?
    Also, how do I install the latest BETA openAL driver? Do I uninstall all Creative software or JUST the driver?
    Thanks.

    After your original cd has been installed and you have rebooted to your sound working correctly,install the older software updates (the ones before the August '05 ones).
    Then install the Nov. '03 Driver using the downloaded setup.
    After reboot, extract that driver setup with an extracting tool like Winzip or WinRar.
    From the extracted driver folder, run CTZAPP.EXE and choose to overwrite previously installed and shared files.
    Reboot twice.
    Install the .84.55-R Driver setup.
    You shouldn't need to run CTZAPP.EXE over itself this time as this file seems to have fixed the problem of the older releases where the driver files were not completely updated or reported as Microsoft signed in Device Manager. You may want to verify this in Windows Device Manager. Mine updated fine with this setup without needing the additional CTZAPP step. All driver files were the correct version and the "signed" designation icon's were all there.
    Now, you may install all the other software updates from August, as well as the latest Audio Console software.
    You don't need to install the latest beta driver unless you play newer OpenAL games. Those drivers break some aspects of the Creative software, although you can still control those broken parts of EAX Console through the new Audio Console.
    If you want to install those beta's, read the instructions first and do what Creative instructs. I successfully applied everything I told you to do, but have no experience using those beta drivers to this point so can not help you there.

  • What is the Optional Installs package on the install DVD?

    Can anyone shed some light on the Optional Installs package on the install disc. For example, what does it upgrade in Address Book or what is the optional iPod support?
    Thanks.

    Thanks, but my question is not what are the items but what changes would be made to them if you install them from the Optional Install package. The items are: Address Book, iCal, iChat, iTunes, Mail, Oxford Dictionaries, Safari, X11, iPod Support, Additional Fonts, Language Translations and Printer Drivers.
    Although some of these also appear in the "Custom" install section of the default package, these are separate and distinct in the Optional Install package. For example, Address Book, iCal, iChat, iTunes, Mail, Safarai and X11 were already installed as part of the default installation. What upgrades would be done by this Optional Install?

  • What is the initial account and password  for Portal ?

    Hi all:
         I installed BW and Portal . I want to do some configuration for Portal , but don't know what the initial account and password? could you please give me a hint ?

    If you get really stuck, you can try to activate the emergency user. See http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/bb6ca4f5fe307be10000000a42189b/frameset.htm for details.

  • What is the initial value for a numeric field ??

    Can someone tell me what the INITIAL VALUE FOR A NUMERIC FIELD is ?? Thank you
    Rod.

    Using the following...
       class MyClass
         int myvar1;  // Default initial value
         int myvar2 = 3;  // Default initial value and default value
         MyOtherClass myclass1; // Default initial value
         void doit()
           int mylocal1;  // No value
           MyOtherClass myclass2; // No value
    All number member variables, like myvar1 start off with andefault initial value which is zero. For booleans this is false. Object reference variables, like myclass1, have a null value.
    All local numeric variables are considered undefined. So mylocal1 and myclass2 are undefined. Before you can use them you must explicitly provide a value.
    Finally note that myvar2 will have two values during class instantiation. Initially it will have a value of zero. Sometime later it will have the value of 3. (When that happens is very definitely outside the scope of what this forum covers. If you want to know then ask in the advanced forum.)

  • What are the SAP Installation  Rewquirements

    I want to buy this laptop
    dell inspiron14r
    Intel® Coreu2122 i3-350M Processor (2.26Ghz, 4Threads, 3M cache)
    Genuine Windows® 7 Home Basic 64 bit (English)
    2GB (1 X 2 GB) 1 DIMM DDR3 1333Mhz
    320GB 5400RPM Hard Drive
    14.0 Widescreen HD WLED Glossy Display with TrueLifeu2122 (1366x768
    Intel® HD Graphics (India)
    DVD+/-RW Optical Drive
    SAP can be install in that laptop?

    Hello,
    I believe you won't have problems if you are installing a SAP system just for test purposes. You might experience performance issues as it has only 2GB.
    Also definitely you will have to change the OS, to a Windows Server (be aware that 2008 R2 is not supported yet) or another
    OS that you prefer. Please check the supported OS / DB platforms at service.sap.com/pam
    Then also follow the specific installation guide for the system that you are installing (e.g. NW7.0 EhP1 SR1 / ERP 6.0 EhP4, etc)
    you can find the guides at service.sap.com/instguides as well.
    Regards,
    Daniel

  • What's the initial Disk Usage of New MacBPro

    Dear Community
    Pl let me know the initial Disk Usage of a new MacBookPro , retina with 265 GB.
    I am asking it, coz I see a lot of my space have been consumed up while I have not used many apps or data.
    Presently it says;
    Apps 22.7GB
    Other 10.74GB
    Pl also note that these are out of "250.4 GB", is it correct ?
    Recently, I run a Developer Installation by Command line but I stopped it in middle.
    Just wondering, if it has eaten up the space.
    Thanks

    Thanks Melophage;
    For taking time to answer it.
    Do you have idea, how to verify it and clean further.
    Thanks

Maybe you are looking for