What is the correct way to transfer data from old hard drive to new Crucial SSD on a mid 2010 13" MBP

I just bought an Crucial M550 256GB for my mid 2010 MBP. And I'm not clear on the data transfer instructions.
1) it came with Acronis instalation kit with a blank CD and a usb cable. I'm not sure what this CD is used for?
2) is it best to install the SSD with a fresh OSX download and then just use time machine to load all my previous settings?
3) or do I partition the SSD before I install it in the MBP and transfer using a clone?
Not sure what to do here...

Well, I am not familiar with the Crucial kit you got - you might want to ask them about that blank CD...... however, I did install an SSD and this is what I did:
I ordered a kit from OWC which included an external USB hard drive enclosure and tools. When it arrived, I first installed it in the external enclosre, hooked it to my MBP and then used CarbonCopyCloner to make a full bootable clone of my system on the new SSD after formatting it to Mac OS Extended (Journaled) and the GUID partition scheme. I then uninstalled the internal, installed the SSD in its place (following the install video availabe at OWC) and booted up - that was it. I installed the old internal drive into the external enclosure for an instantaneous bootable cbackup.

Similar Messages

What is the fastest way to transfer data from old macbook pro to new macbook pro using the migration assistant

I'm trying to transfer my data (applications, files, etc.) From my older macbook pro to my new macbook pro. I've started the migration wizard and the process aHa its going to take 16 hours. Is there a faster way? Fireside? If so what cables would I need and is it ok to stop this since its already startwd.

Ethernet or Firewire:
http://support.apple.com/kb/HT4889
Sounds like you're using WiFi...that will take forever & can produce errors.

How do I transfer data from old hard drive to new mac exactly the same as it was on my old one?

Unfortunately my 2009 iMac has been written off due to a faulty motherboard. Thankfully the company we got the mac from are providing me with a brand new one at no cost as I am under warranty. My old hard drive had many important documents and applications on it and we have requested for the old hard drive back. What I would like to know is how to I go about transferring all the stuff of my old hard drive to my new iMac? I would like everything to be set out exactly the same as it was on my old mac so basically I would like it cloned identical on my new mac from my old hard drive.
Thanks Nathan

In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

Transfer data from old hard drive to new G5

I have an older MAC (IDE) interface and the IO board has gone out. It will no longer power up. I need to somehow copy my data over to a new G5 system. If I understand the specs correctly the new G5 is SATA. Does it also support the IDE drives. What is the easiest way to get my data copied over?
Please advise...Thanks

Hi,
The easiest way is probably to install the old IDE hard drive in an appropriate USB 2.0 or FireWire enclosure, and then connect the unit (externally) to the new computer. There are also USB-to-IDE adapters without a case (but with a power supply). You should find the necessary equipment in most computer stores.
Jan

What is the best way to transfer photos from old laptop to new laptop?

What is the best way to transfer photos from old Macbook Pro to new Macbook Pro?

If you only need to transfer photos, connect the two Macs to the same network. Enable file sharing on both, and copy the iPhoto folder from your old Mac to the new one. Put it in your Pictures folder. This assumes you have no photos on your new MacBook Pro you wish to keep. If you do then let me know.
The first time you launch the new version of iPhoto with a Library created by an older version, it will most likely want to "upgrade your iPhoto Library". This is normal.

What is the best way to transfer data from a PC to an iMac?

What is the best way to transfer data from a PC to an iMac?

If you know how to set up a computer-to-computer Ethernet network, then you can give that a try, but a hard drive will be faster than Ethernet unless you don't have a lot to transfer.
Mac OS X 10.6 Help- Creating a computer-to-computer network

What's the easiest way to transfer data from an old external disk to a new one?

Hello!
My external hard drive (SimpleTech 250GB) is almost full so I bought a LaCie P'9230 3TB hard drive to take the place of the old one. What is the easiest way to transfer the data from the old one to the new one? Also, any tips on how to format the new drive will be appreciated since I haven't done this in a while.
Thank VERY much!!!
tenntooter

Hello rkaufmann87 and Linc,
Thank you both for your responses. It ended up that it was REALLY easy to set up and use the LaCie drive. The drive came with very simple instructions and a very easy to use setup assistant. Setup took about 2 minutes without ever leaving the assistant to get into Disk Utility, etc. Once the drive was setup I simply dragged the older external drive on top of the LaCie drive and the LaCie copied the data in about a minute.
After backing up the old drive I set Time Machine to use the new LaCie drive and selected the encryption option. It took the LaCie drive about an hour to totally back up my iMac's hard drive and to encrypt it as well.
VERY IMPRESSED with LaCie for sure!!! (As well as continuing to be VERY IMPRESSED with my MAC!!!)
Thanks again!
tenntooter

What's the easiest way to transfer content from a mac to a new one?

I currently have an iMac and I just purchased a new MacBook. What is the easiest way to transfer content such as, photos, music, address book and documents? Thx.

Migration Assistant.
It is magic.
http://support.apple.com/kb/HT3322

What is the quickest way to transfer data from one Mac to another?

I just bought a Macbook Air, and using the Migration Assitant, it says that it will take 32 hours to transfer data from my old Macbook to the Macbook Air.
There must be a quicker way! What happens if I abort?

Unless you can use Thunderbolt Target Disk Mode, the fastest means is to use a Time Machine backup from an external drive, using the quickest port you have compatible with that drive.
However, I would NEVER, ever use Migration Asssistant for a new Mac from an old one. Setup Assistant is exponentially better, even if you have to start over.
Read this.
http://pondini.org/OSX/Setup.html

What is the Best way to consolidate projects from multiple hard drives?

I am working on my first tv show. My team and I have been editing various clips on multiple hard drives. What is the best way to put all these different projects into one timeline while still maintaining the ability to edit individual "tracks"?
xmls?
omfs?
Please help

In project library > right click on project > consolidate media
Also
http://support.apple.com/kb/PH12706?viewlocale=en_US

Moving Data from old hard drive to new hard drive

I'm posting this question in this category , I hope it's the right place. Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3. just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it. I hadn't been doing regular backups, so I want to save as much if not all of my data as I can. I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
Here's my plan:
l. Remove old hard drive from laptop
2. purchase new hard drive - I've been told any drive will work, it doesn't have to be designed for a Toshiba. I've been looking at best prices, etc. mainly Western Digital. I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
3. Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
4. Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive. Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
5. Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
6. This is the step I'm not sure what or how to do next. I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install. I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow. I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
I need further help and information about this last step...the critical data transfer method. There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file. Also, would it overwrite or interfere with the clean install on the new drive? I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer. I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer).
My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips. Thanks for any help asap...

Hi!
The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR. This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB). I was told not to go above 120 or I'd have partition problems.
The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead. If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system. Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
My big question now is: Will the Toshiba recovery disc actually reformat my new drive? Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install. I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc. That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do. Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running . (A Knoppix live CD boot disc didn't work either).
I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc. The disc does have drivers, etc. but the question is, are they able to install the OS. I was running XP3 when it crashed, so I know i would have to download that again. I just want to get the darned system back up and running with my new drive and restore disc. IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is.
So, that's where I'm at now! Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

How do i move data from old hard drive to new one?

Just bought a 750GB Hitachi hard drive for my MacBook Pro. What is the best way to move the new data to it? Load it from a time machine backup, or as one source says, install a clean copy of Snow Lepoard, then upgrade to Lion, then copy the data? Any thoughts?

I just used this posting from Apple to copy all my Time Macine files from one drive to a new one, using OS 10.8.4 http://support.apple.com/kb/HT5096

Transferring data from old hard drive to new computer

The hard drive on my MacBook Pro went bad and had to be replaced. I was told it would be simple to transfer its contents onto the new installed hard drive, but I have yet to figure it out. Can anyone tell me what equipment I need and how to do this? Any help would be appreciated.

Perhaps I'm missing something here, but if your old hard drive in fact failed, requiring its replacement, unless you have a separate backup, other than using a data recovery service, your data is gone.

Macbook screen cracked. How to transfer files from old hard drive to new computer?

I had a 13" white macbook, but the screen cracked, and the computer wouldn't work anymore. I took it to be fixed, but they weren't able to fix it, so they gave me a macbook pro. I asked them to try and transfer the files from my old macbook to the old one, but they said that they couldn't, and gave my the hard drive and said I could have someone else try to fix it for me. How do I connect the old hard drive to my new macbook to see if I can get the files off of it? I don't have the old computer anymore, just the hard drive itself. Thanks!

Sorry, I don't understand all of this stuff. Do I have to buy a certain one for Mac? Or will any enclosure work? Would this one do what I need? http://www.bestbuy.ca/en-CA/product/startech-startech-external-hard-drive-enclos ure-with-integrated-usb-cable-sat2510scb-sat2510scb/10192449.aspx?path=9e9804b6f 287edbfe4f83d36c2a6aa71en02

How to transfer history from old hard drive to new computer

So my motherboard on my old PC died. I therefore pulled the hard-drive from my old computer and patiently waited on my new toy to come in. Problem is, I didn't have a chance to do my weekly synch before my old system crashed. I'd like to get the history/favorites off of my old hard-drive, but I'm not sure how to go about it. The OS are also different - old PC was Windows 7, new is 8.1.
Suggestions?

You need the places.sqlite file to restore history.
Note that this file stores the bookmarks as well, so you will lose bookmarks that you already have created.
The file structure in Windows 8 is the same as in Windows 7 and Windows Vista.
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

What is the correct way to transfer data from old hard drive to new Crucial SSD on a mid 2010 13" MBP

Similar Messages

Maybe you are looking for