What is the Correspondance type for Credit Memo Form?

Hi,
I need to use the Credit Memo Form for taking Printouts. Kindly tell me which is the standard Correspondance Tyep that i can use to take this Printout?
It would be a great help if any one can provide some inputs on this..
Thanks
Kishore

Use SAP11.

Similar Messages

  • Other document type for credit memos in MIRO

    Dear,
    i would like to use a seperate document type for credit memos posted with MIR0 compared to RE for invoices. I created a new Z transaction. And now I thought that I could enter this new transaction code in OMR4 (tablle V_169F), but I can not add a new customised transaction in this list. What can I do?
    Or is there an other way to have another document type for credit memos?
    Thank you.
    Leen

    Hi
    You can create a new document type for credit memo through t code OBA7. Once the T code is created with all necessary parameters you can assign this to MIRO transaction.
    You cannot create a customised transaction through OMR4. This is meant for assigning the Doc type to Invoice verification
    Regards
    Jaswanth

  • Implement the following scenario for credit memo

    Dear experts!
    Thank you for your attention!
    how to implement the following scenario for credit memo??????
    1.Credit memo requests are usually blocked for billing (that is, credit) upon creation until the
    employee responsible releases this block.
    2.Within our company, we want make the definition of the point at which the check is carried out and
    the employee responsible dependent upon the value of the credit memo request.
    3.If the value of the credit memo request is below a certain minimum limit, then it can be released
    automatically by the system.
    4.The workflow within the framework of credit memo processing now guarantees that the employee
    responsible is automatically determined and informed when a credit memo request is created,
    depending on the value involved.
    waiting for your help!!!!!
    Best regard!
    Tangdark

    Hi,
    Hope so you know all the setting regarding credit memo customizing.
    Otherwise use the standard one.
    Regarding authorization go to PFCG and create a new role.
    In that you can maintain the authorization regarding the minimum credit limit.
    Please check out this setting.
    And update me also if I was wrong.
    Regards
    Raj.

  • What is the transnaction type for MDF program..?

    Hi All,
    Please do let me know what is the transaction type for MDF(Market Development Fund) program..?
    Thanks in advance.
    Regards,
    Archana.
    Edited by: archu_sap on Jun 23, 2009 8:44 AM

    Actually use this program. I mae some changes to it.
              int x,y,z;
              x = 0;
              y = 5;
              z = 5;
              if(x<=0 || y<=0 || z<=0)
                   System.out.println("not a triangle");
              else
                   if(x==y && x==z)
                        System.out.println("this is a equilateral triangle");
                   else
                        if(x==y || x==z || y==z)
                             System.out.println("this is a isoceles triangle");
                        else
                             System.out.println("this is a scalene triangle");
              }

  • WHAT IS THE CONNECTION TYPE FOR SRM

    HI
    WHAT IS THE CONNECTION TYPE IN SRM RFC DESTINATION.
    3-R3 ....ETC.

    Hi,
    depending on the application to connect to backend SRM system, your connection type may change.
    1. If you write Dynpro appliactions to use SRM System, at backend, it'll connect SRM via RFC.
    2. If you use ITS to create views of SRM Transactions, then the connection will be Dailog and URL
    note 730870 you should find the answer to your question
    Also check:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/22/042638488911d189490000e829fbbd/frameset.htm.
    Look for TCP/IP RFC destination in it
    <b>Reward points</b>
    Regards

  • What's the business case for using adobe forms for handling print forms

    Hi
    We are just starting our SAP project and are looking at the possibility to use Adobe forms for generating and printing our forms, like purchase orders, invoices etc.
    My Question is:
    1. Is this possible / adviseable ?
    2. if so - what's the business case in using Adobe forms  - <i> We have been looking on the SAP Pricing for adobe interactive form, and in our point of view it's grotesque high</i>
    3. What other options do we have - do we need to settle with SAP Script / Smartforms ?
    Regards
    Morten Nielsen

    Hi Morten,
    1. Is this possible / adviseable ?
        As far I know SAP is going to stop support for SAPScript in coming years (I don't know exact dates). It is pretty much advisable to use Adobe Print Forms.
    2. if so - what's the business case in using Adobe forms - We have been looking on the
    SAP Pricing for adobe interactive form, and in our point of view it's grotesque high
      We can use Adobe Print Forms where ever we can able to use SApscripts/PDF print Forms.
    3. What other options do we have - do we need to settle with SAP Script / Smartforms ?
      It is better to settle with Adobe forms rather than using SAPscript/Smart forms. One of the main reason for this is maintainance is much easier than SAPscript/Smart forms.
    But remember that Java Stack need to be installed in order to use Adobe Forms.
    Please visit the below SDN area on Adobe forms for more details.
    https://www.sdn.sap.com/irj/sdn/interactiveforms
    Thanks
    Ramakrishna
    Message was edited by:
            Ramakrishna Ramisetti

  • EDI Message Type for Credit Memo inbound message

    Hi Experts ,
    We have ECC6.04.
    We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type  - INVOIC02)  which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type  - GSVERF03 , Processing code-  GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type-  BUS2094)
    I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
    No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
    Diagnosis
    The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
    System Response
    IDOCS processing is terminated.
    Procedure
    Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
    and
    EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
    Diagnosis
    The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
    This error can have several reasons:
    The segment E1EDK04 is assigned to a group whose header segment does not occur.
    The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
    The sequence of segments in the group in which the segment appears is incorrect.
    Previous errors ('mandatory' segment or group missing) may be due to this error.
    Procedure
    Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
    Th table T661W  is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
    Can anyone please suggest/help me what is the problem and solution on this ?
    Thanks
    NAP

    Hi ,
    Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
    Can any one suggest /  confirm what should  be exact Message Type , Basis Type, Process code  and Funct. Module requiered  for processing EDI inbound message in MM - Logistics Inv Varification ? 
    Thanks
    NAP

  • What is the corresponding option for " Table Display"  in BI 7 Query Design

    Hi Experts,
    In 3.x Query Designer we have an Option  of " Table Display" to arrange the charesterstics in the Coloums .
    Please let me know the corresponding option  in BI 7 Query Designer.
    Thanks
    Bhanuprakash.

    I think there is no Drill down Fesility in Report Designer.  what is the option for a query with Drill down charecterstics.

  • What is the data type for the Data Dashboard XY Graph?

    Hey all,
    I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
    On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
    What gives? Am I missing something obvious? Thanks for the help!!
    Tom
    Solved!
    Go to Solution.

    Great question, Aerogoob.
    The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
    If any of that doesn't make sense, please post back and we can walk you through it in more detail.
    Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

  • What is the content type for a plain text document.

    Hello :)
    I want to generate a plain text document for the user to either see, or to save to disk directly. What do I out for the setContentType MIME type for this?
    Thanks
    Jeff.

    text/plain
    zakir

  • What is the material type for Online/IT material creation?

    Hi
    Can any one tell me what is the standard material type and Item category groups used for creating an online/IT/software product material which is sold online [eg. online information sold over portals, portal subscriptions etc]?
    What are the uncharacteristic of such a material in standard system?
    Regards
    Sanjay

    hi
    these lins might be help ful to you:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9e60be90-0201-0010-49b0-f57cfeeb5530
    http://help.sap.com/saphelp_crm40/helpdata/en/f8/9d7c3e8a5cd064e10000000a114084/frameset.htm
    hope this clears your issue beacuse these lins provide you plenty of information.
    regards
    balajia

  • What is the data type for time and what to insert

    Hi there
    i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
    How do i do that
    what is oracle's built-in type for time???
    adn how do i insert values in the table(i.e the format)
    thanks

    There is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
    You have a lot of options for how to specify dates and timestamps along with format masks.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • What is the Payload Type for wav file

    Please inform me what is the PT (Payload Type) for wav file.
    As 26 is for MJPEG file.
    Thanks alot

    Hi Kittu
    These are the output type generally used for GI..
    WA01
    WA02
    WAE1
    WAE2
    WAE3
    WE03
    You can see the types defined in your system using tcode M706
    regrds
    Yogesh

  • What is the Object Type for User Define table ?

    Dear All Experts,
    I create one of the User Define Table with no. of UDF's
    I already register User Define Table with Unique ID.
    As per my knowledge, Unique ID is our Object type for that User Define Table.
    I want to add Transaction Notification Code for created Used Define Table.
    This Transaction Notification prevents user to must enter name in that form.
    IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
    BEGIN
    If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null  OR  T0.Name = ' ' ) AND T0.Code  = @list_of_cols_val_tab_del )
    begin
    SET @error = 1
    SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
    End
    End
    Please help me for this problem.
    Thanks & Regards,
    Nishit Makadia

    Hi All,
    Thanks for your replay.
    Below code is working for User Define Table's Transaction Notification
    IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
    BEGIN
    If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null  OR  T0.Name = ' ' ) AND T0.Code  = @list_of_cols_val_tab_del)
    begin
    select @error = 10
    select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
    End
    End
    Necessary to Remember 4 Things. That are mentioned below.
    1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
    2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
    3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
    4) Use error code as 10 Number
    Thanks & Regards,
    Nishit Makadia

  • What are the steps required for running a form in web browser in form10g

    Hi All,
    I want to run my form in web i.e forms10g. Please guide me what are the application server, configuation files and built in packages required to set up.
    Thanks

    You have to do some homework before you post here. You're very unlikely to get any help without explaining what you already tried and what your specific problem is. I guess your best of to start reading the Forms Services Deployment Guide.
    I can't point you to the correct location since you didn't even mention the version you're using. If it's 10.1.2.0.2 you can find it at http://download-uk.oracle.com/docs/cd/B14099_19/web.1012/b14032/toc.htm
    Otherwise have a look around at http://docs.oracle.com

Maybe you are looking for

  • Unable to startup in any mode - HELP!!

    Had continuous reboot issue. Tried all the usual methods to get to hard drive (recovery disk, disk utility, restore from backup, download OSX Mavericks, safe mode).  All failed (reboot at some time during the process or showed the drive could not be

  • Is there a simple way to save and open attachments?

    When I save an attachment in mail, I have to hit save, navigate to the place to save, say OK, then to open it, I have to open a finder window, navigate (again) to the place, and open it. Because we have a very deep directory structure on our corporat

  • MY PC IS WORKING VERY SLOWLY AND HANGING AGAIN AND AGAIN

    HELLO    MY NAME IS AKSHAY RAHAR & I HAVE A HP LAPTOP (PAVILION G6 WITH 500 GB HARD DISK , 2 GB RAM , 1 GB GRAPHIC CARD ). IT IS WORKING VERY SLOWLY AND HANG UP AGAIN AND AGAIN .. I REBOOTED IT 3 TIMES BUT I'M FACING SAME PROBLEM PLZ HELP ME ....

  • OBIEE11g - Report Multi Currency Display (Static Data)

    Hi All, I have a requirement where i need to display amount data in multi currency format in OBIEE 11g like LCY and OCY format.User have to select the currency type like USD,YEN,EURO and resulting amount data in report should display in that currency

  • Simple sql stetment with 2 SUM  - wrong result :-(

    Hi guys, here's a simple question that drives me crazy. when I do this, SELECT SUM(CSV_net.cur_amount) AS net_Accumulated from csv_net_production as csv_net where ID='5530500' GROUP BY ID  I get: 35188 //this is the right answer. but when I'm doing t