What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us
What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
How would one go about arranging for such service?
Why is it impossible to contact a real human for support, either via online chat or phone?
Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely.
Similar Messages
-
What is the field and Table for "Batch Class" and "Class Type" in QM.
Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details? -
Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefinedEvery time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined -
What do the symbol and stand for in the following script? not like displa
What do the symbol *>* and *>>* stand for in the following script? It is displacement? They do not like displacement symbols.
$JAVA_HOME/bin/java -cp $CLASSPATH $JVM_OPT $SYS_OPT
oracle.sysman.integration.coherence.EMIntegrationServer *>* $COHERENCE_
HOME/mgmtnode.log *>>* $COHERENCE_HOME/mgmtnode.err &
Thank youjverd wrote:
BigDaddyLoveHandles wrote:
But the example, if it's correct, seems to be using >> to redirect stderr, not to append stdout. The OP should identify what OS and what shell they are using.In any unix shell I'm aware of, > is overwrite and >> is append.Which is why he said "seems to be using >> to redirect stderr". Which I read to mean that BDLH also found it to be incorrect but some "corner-product" shell may do this sort of thing (not that I know, or have heard, of any that do). ;-)
In a bourne family shell, the initial construct would cause stdout to replace the log file and append the err file, and would not redirect stderr.
If you want to send stdout to one file and stderr to another, with overwrite, it'd be
command > logfile 2> errfile
Correct, of course. ;-)
And, of course, changing either of those ">" symbols to ">>" would append (that stream), but you've already said that. ;-) -
What is the ECCN and CCATS for a PS4?
I looked and I called, but no one was able to help me with getting a export classification for the PS4.
Can someone please advise me from Sony...what is the ECCN and CCATS for a PS4?PlayStation has a separate community which can be found here. Please visit it for further assistance. Thanks!
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K -
What are the Terms and Conditions for the AppleID
What are the Terms and Conditions for the AppleID? You know, those speed bumps you blow by when trying to achieve something. Good luck trying to find them. Apple has one place to take your money, many many different ways to tie you up with disparate Terms and Conditions. They say that the fine print is important too. So why are the terms and conditions for the AppleID so hard to find?
Hi, Wanderer 37.
Thank you for visiting Apple Support Communities.
I absolutely understand your concern with having access to Terms and Conditions that you have accepted, and at Apple, we want this information to be as transparent as possible. You can access the iTunes/Apple ID Terms and Conditions here:
TERMS AND CONDITIONS
https://www.apple.com/legal/internet-services/itunes/id/terms-en.html
Cheers,
Jason H. -
What is the values and meaning for parameter TCLAS in functions
what is the values and meaning for parameter TCLAS in functions like
HR_INFOTYPE_OPERATION
regards
janHi Jan,
Good Morning,
In TCLAS,
A, B , T will be there.
A- Master data and time data.
B- Applicant data.
T- Shift Schedule.
So, here we can say the default value will be integrated according to the above ABT.
Means in the feature ABKRS, if you give the default values for all the three, your payroll area will appear in Master Data and Time data. And in recruitment ( Appicant data ) and work schedules. Means you are getting ingrated to all the three.
And you can observe the feature PINCH also.
If you dont want to get integrate with Master data, then dont give the default value under the A- Master date and Time data. And if you want to get integrate with Recruitment , then give the default value under B.
I think u got the clear idea about TCLAS.
Dont forget to give the points
Thanks in Advance
Cheers
Vijai -
I have purchsed iPhone 4S from US. Now my screen is broken and want to get it repaired. What will the cost and time taken in repairing of the same in US.
You cannot get warranty or out of warranty service in India on a US purchased phone. The warranty on the iPhone is not international.
-
What are the advantages and disadvantages for the larger blocksize and for
What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?
Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks. -
When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.
I can't follow your meaning. What does connect directly to your ISP mean?
Did you mean turning off WiFi but turning on Cellular Data on your iPhone? -
What are the points and levels for on the apple communities
what are the points and levels for on the apple communities
You mean these?
https://discussions.apple.com/community/user_tips_library_documents
I wouldn't consider 665 tips as being "hardly any", myself.
Regards. -
attempting to update operating system on macbook pro with osx10.4.11.
how is this accomplished and what is the cost ? is the worth the expense give the age of unit?Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard. -
What determines the price and tax for consignment stock?
Hi All,
anyone knows how the price and tax are calculated for consignment stock? in other word, among the info record , contract or material master, what determines the price and the tax calculation for consignment stock?
please advise, your input will be rewarded.
thanks,Ravi,
I have almost same Nancy's problem. I change tax code indicator on ME12 from N0 to N2, after that, I made the invoice verification on MRKO for a consignment material, however tax code N0 (original) was taked for the withdrawal.
I followed up notes:
Note 87860 - Consignment: determining tax code as of 4.0
140675 - Consignment: Determination of tax code transition
But these notes doesn't apply for 4.7. Do you know any note that apply on this version?
Thanks in advance.
Myriam -
Ok... the only reason why i want to uprade my software is because of StarCraft 2. For those that don't know, Heart of the Swarm is coming out this March. I've been eagerly waiting for this expansion. I just read that SC2 HOTS will not be able to support any software below lion. I currently have 10.6.8 and i was wondering what are the disadvantages and advantages (aside from being able to play this expansion) of upgrading my software? Are there any draw backs, etc.
Go all the way to Mountain Lion if you can...
Upgrade to Mountain Lion
But...
Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)
Also, get more RAM...
You can use this Link to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP http://support.apple.com/kb/ht1270 -
Hi, a student had a question and I honestly never thought about this: when you open multiple documents in Photoshop CS4, what's the rhyme and reason behind the order they're arranged in (left to right?). Sometimes they're in one order and sometimes they're in another, and it doesn't always correspond with the filenames or the order in which they were selected.
Thanks, hope someone can enlighten us. It's probably really obvious, but... !My student says that's not exactly what she was asking. What she meant was, is the arrangement of multiple tabbed documents open within Photoshop (which one is furthest left, which one comes next to it, which one is furthest right etc) dependent on something? In what order they were opened, alphabetical, date created or what?
Maybe you are looking for
-
Disable profit segment in the billing document
Hi experts, I'd like to know if it's possible to disable the field profit segment in the billing document. I need to post amounts from taxes in cost center , but as the profit segment is enable in billing document, the amounts are posted in CO-PA. Th
-
Scenario execution errors not logged
Hi, in production environment, we start our scenarios by means of startscen.bat. Sometimes, when an error occurs, startscen.bat returns an error which does not appear in the operator log (scenario seems to be still running). Has someone been faced to
-
I updated my iPad OS this morning, and now I can no longer use iMessage to send pictures. When I try to get one from the camera roll, it blows up. Is this a known problem?
-
Unable to sync settings today can not connect to the creative cloud ?? I can sign in and sign out to deactivate and activate. retried many times.
-
I want users to ckick a thumbnail on my "thumbnails" page, then go to a detail page where they can see the full size image. But I also want navigation on this details page so users can go next next next through all full size (repeat region showing 1