What is the creator code for final cut pro x?

Final Cut Pro 7 has creator code "KeyG" but the trial for FCP X has creator code "????" (according to the .plist).  Does the full version use "KeyG" like previous ones, or a new code?
Thanks
Marc

My first question would be how well 5.1 would work with SL. People have reported problems.
As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
Good luck.
Russ

Similar Messages

  • What are the system requirements for Final Cut Pro 7?

    I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
    I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
    Is there anyway I can find out the system requirements.

    Thanks
    I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

  • What is the best camcorder for final cut pro 5.1.4

    yes i know it is an older program i am having problems uploading video from certain cameras to final cut pro.  i was told it was a software problem with certain cameras and i cannot find any cameras that have firewire anymore that are not really expensive.  just need some ideas guys thanks

    My first question would be how well 5.1 would work with SL. People have reported problems.
    As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
    If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
    Good luck.
    Russ

  • What is the best workflow for Final Cut Pro X across multiple computers?

    I travel on a team that is in a different location every week, so all of our video editing has to be fairly moble. We have 3 macbook pros and would like to use final cut X on all of them. What would be the best workflow for us all to work on the same project and sync it across the computers? (eg, one of us editing the footage, one editing the sound, one working on visual effects?)

    My first question would be how well 5.1 would work with SL. People have reported problems.
    As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
    If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
    Good luck.
    Russ

  • Code for Final Cut Pro 2 not being accepted by FC Studio 2

    I upgraded to OS X 10.4.11 from 10.4.2. The FC Studio 2 icon would bounce a few times and stop, but nothing else would happen. 10.4.2 was reinstalled, erasing everything. An attempt was made at starting FCP 2, but the OS is not finding the files necessary in OS 9.
    Upgrades Final Cut Pro 4 and FC Studio 2 were made since purchasing FCP 2 as a full package approximately 7 years ago, but FC Studio 2 is not accepting the code for Final Cut Pro 2. How do I correct the problem short of buying the full FC Studio 2 or buying a new hard drive?
    Thank you.

    It doesn't make sense to me either. As Thomas stated, the crossgrade that required you to send in your old FCP install disc was for Final Cut Studio version 1 (which included FCP 5.1) - NOT version 2. And regardless of the fact that you sent in your install disc, you should still have the serial number for FCP 4. It was printed on two stickers that were attached to the "Installing Your Software" booklet that was included when you purchased FCP 4 (upgrade or full retail versions).
    There is NO need to have the old software installed in order to install and upgrade to FCS 1 or 2. All you need is the serial number form the older version; you'll be prompted to enter it during the install process for FCS 1 or 2.
    FCP 2 may install on an OSX version, but will NOT run on ANY OSX version - it only runs on a full installation of OS 9.
    -DH

  • What is the oldest version of Final Cut Pro HD that supports...?

    What is the oldest version of Final Cut Pro HD that supports clips from Panasonic P2 Cameras?

    You must have 5.0.4 or later.
    Nothing earlier will work:
    http://library.creativecow.net/articles/rossshane/p2workflow/video-tutorial.php

  • While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

    While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

    This has happened to me with a few downloads without any upsets.
    You should be OK.
    As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
    Al

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • What's the right mac for Final Cut Studio?

    Hi, I am a cameraman who wants to start learning final cut pro 5 to at first get a dvd together of my work (about 10 mins)and then maybe do some professional editing down the line. I am a bit lost with what mac I need to run studio on as I'm hearing conflicting voices. I can afford to buy an iMac G5 with 1.5 gig of ram. Will all the applications in studio run on this machine? should i bump up the hardrive to 250? Worst comes to worst should i wait and buy a power mac? Thanks for any help.
    Imac g5   Mac OS X (10.4.3)  

    Let's get serious. You are trying to put together a short reel, not edit Cold Mountain.
    If you believe you will make your living from this machine, get a professional grade box and all the bells and whistles to go with it.(max ram, multiple internal SATA drives, big monitors, etc)
    If you want to get your feet wet, develop an understanding of the program and its basic operational structure, most anything that meets the minimum configuration will do. (Heck, you can edit on a powerbook...)
    In the first case, (the professional box) if you spend 5 minutes rather than 15 minutes waiting for a render, it makes a differnece, time IS money. In the second case (learning curve), it doesn't matter. It's your time.
    Cheers,
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • What is the latest version of Final Cut Pro or Express for PPC G5

    I think I am to the point that iDVD and iMovie don't help. Do I have any FCP options available?

    Final Cut Studio 2...that includes FCP 6. But finding it to buy NOW will be tricky. Pretty much only eBay at this point.
    Shane

  • Trying to find the app preference for Final Cut Pro 7

    Upgraded from Snow Leopard to Mavericks
    running Final Cut ver7.03
    Black Magic Design Intensity Pro card in PCIe
    26 gigs RAM
    Normally if I had an issue in Snow Leopard, I could TRASH the FCPplist and re instate my preferences from the start.
    Im having some home made issues due to poor file keeping, changed a few project files destinations and the like and now wanted to trash the
    FINAL CUT PREF plist file but its NOT in the Preference file.  WHat did Mavericks do with the preference files???  I noticed that Mavericks did away with
    the usual System Library and User Library now only having ONE Library folder with preferences.  I searched ProApps and did not find a FCPplist only a
    RegFinalCut Plist  is this the one I want????
    ANy help appreciated!!
    SHould I go back and buy Mountain Lion and revert my entire system back???
    HELP!
    Lou

    Download Preference Manager from Digital Rebellion (free):
    http://www.digitalrebellion.com/prefman/
    and it will do it all for you. Your FCP preference will be restored to default the next time you launch FCP.
    MtD

  • Plugins for final cut pro?

    which are the best plugins for final cut pro?

    To do what?
    http://www.cgm-online.com/eiperle/index_e.html
    http://www.nattress.com/
    http://www.joesfilters.com/

  • Help for Final Cut Pro X training book.

    Hello everyone!
    I've recently decided to study to get the Apple Certification for Final Cut Pro X level 1, so I bought the book "Apple Pro Training Series: Final Cut Pro X" by Diana Weynand. Due to a mistake of mine, I bought the edition released on October 2011, knowing later that there is a 2012 version and a new one coming out in just a month.
    I'd like to know if I can still handle the exam studying this book released on 2011, or if I necessarily need to get the latest version coming out sooon.
    Thanks in advance for your help!
    - Alex

    I understand. I don't feel like waiting so much time, so I need to choose.
    1 - Start studying my old 2011 book since I have it here, and see if I can make it before the exam is updated (I have no idea how much time it'll take me to study the entire book though, even if I study everyday).
    2 - Buy the Motion 5 book and get that certification while waiting for the new FCPX book to come out.
    3 - Just waiting for the new FCPX book (which means wasting time waiting).
    Thanks for your answers and patience.

  • HT4589 What are the computer requirements or specs for Final Cut Pro

    What are the computer specs required for Final Cut Pro?
    Also is anyone operating Avid Media Seven on an OS X Lion 10.

    Lynn Kielley wrote:
    What are the computer specs required for Final Cut Pro?
    http://www.apple.com/finalcutpro/specs/
    Even though it says 4 GB RAM recommended, I think most experience users woild say 8 GB and up is the real minimum.
    Can't answer the Avid question.
    Russ

  • What is the cost for Final Cut Pro if I don't have a previous version to update?

    What is the cost for Final Cut Pro if I don't have a previous version to update? I see the $299 price for updates.
    What is the brand new purchase price?

    Thanks so much. Yes I was thinking on the lines of PwnySlaystation's response.
    I appreciate the help.
    Will this new version run on OS 10.6.8?
    Thanks for the help.

Maybe you are looking for

  • Load Balancing with Xserve?

    Hi, I have a unique situation with my network which I'm having a heck of a time getting info about. Setup: I currently have two sites. Site A has cable for internet service, and is providing site B with internet via a WDS wireless bridge. So basicall

  • No video on start up

    I have an IMAC with snow leopard OS.  on startup the white light comes on but no video.  I can hear the fan running but nothing else.

  • Fade Effect problem in IE

    hi everyone, I'm having problems with a fade out/in transition in IE8.  The area I am changing has a white background (actually there are a few nested divs that all have a white background), and the fade effect triggers on a click in the navigation a

  • Print preview before saving for notification

    Hi all, When creating a notification in IW51, user could preview nothing before he/she saves the notification. What method could be used in the print program so that the preview shows the contents before saving? Thanks!

  • System relate issue

    Hi friends, im in guess of where to post system related issue, since this is my problem run --> drivers --> host file, i couldnt able to edit & save host file. Tried below steps: 1. host --> properties --> Security --> add --> everyone --> given full