What is the current status of iWEb BLOG?

What is the current realitly around iWeb's "Blog" feature. When MM disappeared, the Blog feature suffered. It did not "translate" to other servers which drove users to use other blogging programs rather than do the gymnastics to make iWeb Blogs work.
Is this still the state of affairs?
ks

Well yes and it always will be as MobileMe is not coming back and if you are talking about blog comments, then that was a MobileMe only feature.
There are workaround for this that work very well and you can have a look at http://www.intensedebate.com and there is also Disqus and perhaps other software.
Try WordPress.com or .org instead, Blogger by Google or Posterous and re-create your blog and then link to it from your website or display it in your website as an iframe within an html snippet.

Similar Messages

  • What is the current status for Kerberos Constrained delegation feature on the ASA platform?

    What is the current status for Kerberos Constrained delegation feature on the ASA platform?

    Hi Oscar,
    This is not available yet in the current software. Now, we cannot give any official information on this forum about software that has not been released yet, but if you really want to know I would suggest that you contact your local Cisco sales office to confirm with your account team which new features will be in the upcoming ASA 8.4 software release.
    hth
    Herbert

  • What is the current status of compatibility of OS X with Logic 9 & Final Cut Studio 3

    With the impending demise of Mobile Me, I'll be making some changes.  In order to utilize the full capabiliteis of new Mobile Me I'd need to upgrade to OS X.  I have not yet done so because I have and use FCS 3 and Logic 9, both of which have been reported as having compatibility problems with Lion.  I write to ask the status  especially of compatibility between Lion and Logic 9.  With sadness I understand that FCS 3 will never work with Lion, so  I'll also ask of any FCS 3 users who have upgraded: what have you done to be able to work with your video created in FCS 3?  Thanks.

    If they originally had compatibility problems with Lion that has not changed. Apple has done nothing to make older programs run in their newest OS. This will never change, in fact it will only get worse. Even some Adobe software released last year does not run properly on Lion. Has Apple done anything about that? No they have not. They, Apple, expects the software companies to update their software to work correctly with Lion and their user base to upgrade to the newer versions to run properly on Lion. That is with No concern for the Mac user.

  • What is the current status on JINI technology?

    I am wondering if there are any home devices like TV-s, DVD-s, etc. implementing JINI technology?
    Did JINI end up just as another research project?
    Can someone give me few words on this?
    Thank you in advance
    Nermin B.

    The best place to assess Jini's status is its Web site:
    http://www.jini.org/
    <personal-opinion>
    Looks like it's still active, but there's not much buzz or mindshare in the press. It's certainly not getting the play that SOAP or Web Services or SOA are right now.
    Being 100% Java/RMI based seems like a limitation to me.
    Brilliant stuff from a brilliant individual. I think it was ahead of its time. Limited network resources (compared to current capability) and onerous licensing terms and fees nipped it in the bud. It's open source now, but my sense is that it's too late.
    From my vantage point, I can't see any significant commercial applications being written in Jini. Conservative management would frown on any suggestion to use it where I work.
    </personal-opinion>
    %

  • Nokia Silverlight - what is the current status?

    About a year ago, amid big fanfare, it was announced that silverlight was goingto be available on the Symbian platform. Where can I download Silverlight for E71?

    still in production  i had a look earlier and it cant be found to download anyehere.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • What is the best replacement for iWeb?

    I have been using iWeb for a very long time. I need to move on to something that is being updated. What is the best replacement for iWeb? I see Wordpress needs special software to work on a Mac.
    Thanks!
    Pat

    I have used HostExcellence in the past and they support all the CMS's including WordPress, so you should have no problems there.
    The top CMS's that most have heard about and use are Drupal, Joomla and WordPress.
    There is probably no best one, but you need to look at them all and use the one that best fits your needs.
    I have used all of them in the past, but most recently Joomla and Drupal.  Drupal has a reputation for being quite hard and Drupal 6 was, but with the advent of Drupal 7, things got a lot easier.  There are a lot more themes that you can use and if you want increased functionality in Drupal, then you can download Modules and install them.  You can have a membership site if you want it and this is easy to do - people can sign up for an account and you can restrict their access to certain parts of the site and then limit what they can do.  You can allow people to complete forms on the site itself and the results to be sent to you.  There is a Blog module that you can enable and that comes in Drupal Core with no need to download an extra module.
    Joomla is good also and you can have a Blog with it too and there are lots of themes to choose from, but sometimes you have to pay for extras with Joomla - you can download Extensions and Plugins, but they may not always be free.
    WordPress was always just thought of as a blogging platform, but it has evolved in to much more than that and you can now create stunning looking websites with blogs - there are a good range of free templates to choose from and if you want your blog on the front page of your site you can have this, or you can change it to another part of your site if you want a static front page.  To extend functionality you can download plugins from inside WordPress itself, most of which are free.  This might be the easiest one for you to use if you just want a website with a built in blog that is relatively easy.
    Check out the others though at Drupal.org, Joomla.org and then WordPress.org.

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • What is the current firmware for iphone 3g?

    What is the current firmware for iphone 3g?

    Dear Genes....    wjosten   /   Templeton Peck,
                             My iPhone 3G is on iOS 4.0.(8A293) and with Firmware  05.13.04. Since few days when I shifted  to New operator VODAFONE, I am troubling with "NO SERVICE" most of the time, but when I checked my SIM in another Mobile, it is working fine. So please tell me which iOS do i need to switch to and what will be my Firmware. As I own iPhone 3G, moving to iOS 4.2.1 is very slow.
    Please do suggest. Itz a lil Urgent.
    Looking Ahead to hear from you.
    Thanks in Advance....

  • What is the current best possible Qosmio I can buy?

    Hi, only just joined the forum, i run a large pc/laptop/gps reail repair outlet in es***, uk, I'm (for my sins) a microsoft ex employee and left 13 yrs ago to go it alone.
    I have become something of a Qosmio Addict, now owning 8, my latest aquisition a Brand New F-10-124 from e-bay for next to nothing.
    Just thought I'd say Hi and ask what is the current best possible Qosmio I can buy, because no 9 is coming!
    Paul
    Message was edited by: techstore

    Hi
    Well, at this time the Qosmio G30 and F30 are the newest Qosmio units at the market.
    If you want to know more details about the Toshiba notebooks and especially about the Qosmio so please check the Toshiba website:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/model_index_page.jsp?service=EU&ID=96787
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/notebooks_desktops_servers_family_page.jsp?service =EU
    bye

  • What is the current magic mouse model number?

    What is the current magic mouse model number?

    It’s MB829LL/A; the fourth and fifth letters may vary by country.
    (116783)

  • What is the current operating system on a Mac laptop?

    I'm shopping for a Mac laptop...what is the current operating system for a mac laptop?

    Mavericks is no longer available from Apple — unless you purchase an older refurb unit from Apple that still has it installed. Yosemite 10.10.0 (now 10.10.2) superseded it. Mavericks came with my May 2014 MacBook Air, and I had no issues with Mavericks, or applications on it. I subsequently upgraded to Yosemite, because I prefer to stay current — and have had no issues with Yosemite either.

  • What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

    What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

    Hi,
    Login to  http://service.sap.com/swdc using your S user-id
    Serach for kernel
    Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
    Regards,
    Rajneesh

  • Standard report Programs to find the current status of workflows

    Hi Experts,
                       Are there any Standard report Programs to find the current status of workflows or workflows which are pending.
    Regards,
    Hari

    Go to SWI1 t-code
    Give the appropriate Status - Ready or Inprocess or Waiting
    Input the Task - either WF Template or Standard Task.
    Choose the time period and execute the report.
    Regards,
    PR.

  • What is the current Version of Oracle XML Publisher

    Hi,
    This is S.V.Ramana Rao from india pls let me know following Details please, presently iam using XML Publisher Release 5.6.2, this is the current verions?. if it is a free version. where should i contact full version. for further details in india
    1.what is the Current versin of XML Publisher.
    2.can i deploy the in the server so that, access multuple clents? is it possible?
    3. what is the system requirments to deploy.
    Please Give me Details.
    Thank you,
    S.V.Ramana Rao.

    Hi ,
    Thanks for all you helping.
    I have got question on this, if xmlp 5.6.3 is recent version, then what about oracle BI publisher (formerly known as xmlp) 10.1.3.0 version came out and most of the clients started using this.So to the best of my knowledge this is the latest version.
    Please correct me if think wrong,
    --skbi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Get the current status of IDOC

    Hi,
    I want the current status of IDOC.
    Is there any function module through which i can get the current status of IDOC?

    Hi,
    Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
    Regards
    Vinod

Maybe you are looking for

  • Free of charge delivery.

    Hi, I'm looking for a movement type that is the opposite to 511 (not 512 reversal) but the movement used to deliver to vendor something without charge that must be repared from vendor without any charge. Best regards

  • Wrong port in FTP receiver adapter - no errors in message monitoring?

    Hello all We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everyth

  • Scheduling,Email Setup in cluster environment and multiple job servers

    Hello All,     I have to schedule and email instances of crystal reports to users in PDF and excel format. A Clustered environment of Business Objects 3.1 SP3 is been setup on 2 servers. There is 2 instances of crystal reports Job server been created

  • Base tables plsss

    hai Cananyone tell me wht are the base tables for 1) Opening , Closing Inventroy 2) Production (Material Group = Prime/Nonprime/Scrap) 3) Downstream Usage 4)Liftings 5) Shutdowns I think , these belong to PP/SD/LE/Inventory modules . Pls tell me urge

  • In Labview, is there an easy way to implement a string input from the operator with a dialog box?

    I have a production test system that I want the operator to enter the serial number through a dialog box. As I've currently done it, there's a string control on the front panel to enter the serial number, but the program will run without it. Any help