What is the data source for cProjects hierarchy texts 0CPR_GUID?

The cProjects hierarchy will not display texts, only the technical name. I believe I must extract the texts for BW InfoObject 0CPR_GUID. I can not identify the text counterpart to 0DPR_HIERARCHY_ATTR data source for BW InfoObject 0CPR_GUID.
Questions:
1) What is the technical name for the text data source of BW InfoObject 0CPR_GUID?
2) Is this data source included in NetWeaver 04?
Thanks you for your help,
John Hawk
[email protected]
(209) 324-0436

The Answer:
The project element data sources must be mapped to both the project element infosoure AND 0CPR_GUI_TEXT.
For each data source
0DPR_APPROVAL_TEXT to 0CPR_APPROVAL_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_ITEM_TEXT to 0CPR_CHECKLIST_ITEM_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_TEXT to     0CPR_CHECKLIST_TEXT and0CPR_GUID_TEXT
0DPR_PART_TEXT to 0CPR_PART_TEXT and 0CPR_GUID_TEXT
0DPR_PHASE_TEXT to 0CPR_PHASE_TEXT and     0CPR_GUID_TEXT
0DPR_PROJECT_TEXT to 0CPR_PROJECT_TEXT     and 0CPR_GUID_TEXT
0DPR_TASK_TEXT to 0CPR_TASK_TEXT and 0CPR_GUID_TEXT

Similar Messages

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Data source for Payment trem TEXT

Hi,
What is the data source for payment term text ??
Please let me know soon.
Points assured...
Bill

Hi,
we created a generic text datasource based on table TVZBT (call tran RSO2) since I dind't find any business content for that purpose.
Connect it then to IObj 0PMNTTRMS.
hope this helps...
Olivier.

What is the data source name and the data target name for the table COSP

Hi,
Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
here we are using all the business content extractors and BI content cubes and odss.
please reply immediately as its very jurgent isssue.
Thanks,
ashok

answered

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

Hi,
I am looking at help.sap.com but not able to find out the data flow from these two datasources.
0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
What are the data targets and further flow for these data sources?
Thanks,
Akshara

Hi,
Data source - 0EC_PCA_1 and cube - 0PCA_C01
Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
you can use same cube for two data sources.
Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
Thanks

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is the data usage for ipad mini on stand by when connected to WIFI?

We connected 34 ipad mini's for yacht WIFI network that has internet access. Now data usage is 1GB/h higher for the all connections than before.
None of the ipad's are used for internet. My question is what is the data usage when ipad is is standby usage and how I can stop is downloading/uploading.
This slows down internet for rest of the users in same network.
Please help.

Check out this Apple article -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
It'll walk you through uninstalling iTunes and the other Apple software.

What is the data dictionary for direcoty objects?

Dear All,
I would like to know the data dictionary for directory objects. Or where i can get more details of directory objects.
Thanks in advance
Balaji

Hi,
YOu can use dba_directories view to get info about directory.
For other views
1.select * from tab where tname like '%DIRECT%';
2.select * from dictionary where table_name like '%DIRECT%';
Regards
Jafar

What is the data source to populate ODS 0FIGL_O10

Hi,
The data source 0FI_GL_10 is not available in my source system(OLTP system), so from where should i populate the ods 0figl_o10?
When i installed the ods from business content it automatically took the data source as 0fi_gl_10. but when i try to upload data, ie, when i assign data source to the infosource 0fi_gl_10 in RSA1, the source system does not show 0fi_gl_10. Normally we transfer the data source in source system and replicate it in BW, but this particular data source is not available in source system.
Any idea on which data source should we use instead of 0fi_gl_10?
Regards,
Pradhiba

Hi Pradhiba,
Refer this link:
0FI_GL_10 Datasource
http://help.sap.com/saphelp_nw04/helpdata/en/be/928f40f5767d17e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/757140723d990ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
Bye
Dinesh

What is the data type for the Data Dashboard XY Graph?

Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.

Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

What is the data type for time and what to insert

Hi there
i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
How do i do that
what is oracle's built-in type for time???
adn how do i insert values in the table(i.e the format)
thanks

There is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
You have a lot of options for how to specify dates and timestamps along with format masks.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

What is the data source for cProjects hierarchy texts 0CPR_GUID?

Similar Messages

Maybe you are looking for