What is the data source to populate ODS 0FIGL_O10

Hi,
The data source 0FI_GL_10 is not available in my source system(OLTP system), so from where should i populate the ods 0figl_o10?
When i installed the ods from business content it automatically took the data source as 0fi_gl_10. but when i try to upload data, ie, when i assign data source to the infosource 0fi_gl_10 in RSA1, the source system does not show 0fi_gl_10. Normally we transfer the data source in source system and replicate it in BW, but this particular data source is not available in source system.
Any idea on which data source should we use instead of 0fi_gl_10?
Regards,
Pradhiba

Hi Pradhiba,
Refer this link:
0FI_GL_10 Datasource
http://help.sap.com/saphelp_nw04/helpdata/en/be/928f40f5767d17e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/757140723d990ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
Bye
Dinesh

Similar Messages

What is the data source name and the data target name for the table COSP

Hi,
Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
here we are using all the business content extractors and BI content cubes and odss.
please reply immediately as its very jurgent isssue.
Thanks,
ashok

answered

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

What is the data source for cProjects hierarchy texts 0CPR_GUID?

The cProjects hierarchy will not display texts, only the technical name. I believe I must extract the texts for BW InfoObject 0CPR_GUID. I can not identify the text counterpart to 0DPR_HIERARCHY_ATTR data source for BW InfoObject 0CPR_GUID.
Questions:
1) What is the technical name for the text data source of BW InfoObject 0CPR_GUID?
2) Is this data source included in NetWeaver 04?
Thanks you for your help,
John Hawk
[email protected]
(209) 324-0436

The Answer:
The project element data sources must be mapped to both the project element infosoure AND 0CPR_GUI_TEXT.
For each data source
0DPR_APPROVAL_TEXT to 0CPR_APPROVAL_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_ITEM_TEXT to 0CPR_CHECKLIST_ITEM_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_TEXT to     0CPR_CHECKLIST_TEXT and0CPR_GUID_TEXT
0DPR_PART_TEXT to 0CPR_PART_TEXT and 0CPR_GUID_TEXT
0DPR_PHASE_TEXT to 0CPR_PHASE_TEXT and     0CPR_GUID_TEXT
0DPR_PROJECT_TEXT to 0CPR_PROJECT_TEXT     and 0CPR_GUID_TEXT
0DPR_TASK_TEXT to 0CPR_TASK_TEXT and 0CPR_GUID_TEXT

Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

Friends,
I have situation :
Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
when for the above ods and the data source when trying to delete the request whole data got delted.
All the data got deleted in the fore ground. no background job has been generated for this.
I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
Many Thanks
VSM

Hi,
I suppose you want to know the possibilitiy of getting the data.
If the entire data is being deleted, you can reload the data from source system.
Load the setup table for your application. Then carry out init request.
Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
Once this is done, delta queues will again start filling up.

Needing to use xml data source to populate richfaces tree nodes

Hey I cant seem to figure this out. I know I probably need to write some java code but Im not sure how it should look. I have some xml and I need to use the data from within the elements to populate some nodes on a richfaces tree.
I know how to use a .properties file as the data source for the nodes, and how to use some existign nodes to populate the nodes. Both are done with java code I can post here if needed.
But I dont know how to go about writing the java code to take the data from xml elements, and then somehow parse it to use in a richfaces tree.
Here is some info on what Im using with my project:
eclipse
simplexml
httpclient
jsf
richfaces library

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Flex 3 - Using item renderers with the AdvancedDataGrid
control:
Flex Data Visualization Developer's Guide / Advanced Data
Grid Controls and .... that the item renderer is for column 2 of
the control: <?xml version='1.0'?
Link:
http://livedocs.adobe.com/flex/3/html/advdatagrid_10.html
DataGrid ItemRenderer - Flex India Community | Google Groups:
Apr 28, 2008 ... My dataGrid itemRenderer displays a certain
icon and sets fontStyle ... <mx:Label id='txt' fontWeight='bold'
text='{data.subject}'/>
Link:
http://groups.google.com/group/flex_india/browse_thread/thread/bd30dd974da47d68
Flex 3 - DataGrid control:
<mx:Button label='Toggle Price Column'
click='price.visible = !price.visible;' ... Flex lets you populate
a DataGrid control from an ActionScript variable
Link:
http://livedocs.adobe.com/flex/3/html/dpcontrols_6.html
Flex Fun - Advanced DataGrid Topics:
You will notice that the datagrid doesn't have any header
labels or vertical ..... After the opening tag we add a
<mx:itemRenderer> telling Flex that we are
Link:
http://blog.paranoidferret.com/index.php/2007/08/29/flex-fun-advanced-datagrid-topics/
Flex 3 - Instrumenting RandomWalk events:
Flex Data Visualization Developer's Guide / Advanced Data
Grid Controls and Automation Tools ... itemRenderer = child as
Label; dispatchEvent(rEvent);
Link:
http://livedocs.adobe.com/flex/3/html/functest_components2_20.html
Adobe Flex 2: Advanced DataGrid:
Adobe Flex 2: Advanced DataGrid. Drop-in RadioButtonGroupBox;
runtime computed .... Anatole authored number of books and articles
on AJAX, XML, Internet and
Link:
http://flex.sys-con.com/node/311283
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to send data from 4 different data sources to one ODS

Hello Gurus,
There is a transaction called KSB1 in R/3.
It has data related to cost center , cost element, G/L .
In BI, i need to transfer the data from these Data sources to one ODS.
Can any body give me some idea.
Points will be awarded for any kind of response .
Thanks .
Anu

Hi Rupa..
In your requirement some data sources (Cost centre, Cost element) are master data sources.
They are available as info Objects in BI (Content).
So there is no need to create ODS on these.
But the general scenario for creating ODS from multiple data sources in case of Transaction documents
Like :
PO header, PO line items...
For this the Pre-requisite is to have common fields between these data sources (eg PONo).
Hope this gives idea for u....
Cheers...
Varma

Couldn't fetch the data from the data source...[nQSError: 16023]

Hi all.
I think that the problem I want to discuss is well-known, but still I got no answer whatever I tried ...
I installed the BIEE on Linux (32 bit, OEL 5 - to be more precise), the complete installation was not a big deal. After that I installed the Administration tool on my laptop and created the repository. So... my tnsnames.ora on the laptop looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb)
And the tnsnames.ora on server, in its turn, looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb.localdomain)
The database worked normally and I created and transferred the repository to the server and started it up.
It started without any errors, but when I tried to fetch the data via the representation services I got the error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
I discovered, that the ODBC on my laptop was named not correctly (it should have been identical to tnsnames entry) - so I corrected it, saved and replaced the repository on the server and restarted it... - and still got the same error.
Apparently, something is wrong with the data source. So let me put here some more information...
My user.sh looks like this:
ORACLE_HOME=/u01/app/ora/product/11.2.0/dbhome_1
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
and my odbc.ini looks like this:
[ODBC]
Trace=0
TraceFile=odbctrace.out
TraceDll=/u01/OracleBI/odbc/lib/odbctrac.so
InstallDir=/u01/OracleBI/odbc
UseCursorLib=0
IANAAppCodePage=4
[ODBC Data Sources]
AnalyticsWeb=Oracle BI Server
Cluster=Oracle BI Server
SSL_Sample=Oracle BI Server
TESTDB=Oracle BI Server
[TESTDB]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=SH
Catalog=
UID=
PWD=
Port=9703
[AnalyticsWeb]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
Catalog=
UID=
PWD=
Port=9703
[Cluster]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
FinalTimeOutForContactingCCS=60
InitialTimeOutForContactingPrimaryCCS=5
IsClusteredDSN=Yes
Catalog=SnowFlakeSales
UID=Administrator
PWD=
Port=9703
PrimaryCCS=
PrimaryCCSPort=9706
SecondaryCCS=
SecondaryCCSPort=9706
Regional=No
[SSL_Sample]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=localhost
Repository=
Catalog=SnowflakeSales
UID=
PWD=
Port=9703
SSL=Yes
SSLCertificateFile=/path/to/ssl/certificate.pem
SSLPrivateKeyFile=/path/to/ssl/privatekey.pem
SSLPassphraseFile=/path/to/ssl/passphrase.txt
SSLCipherList=
SSLVerifyPeer=No
SSLCACertificateDir=/path/to/ca/certificate/dir
SSLCACertificateFile=/path/to/ca/certificate/file.pem
SSLTrustedPeerDNs=
SSLCertVerificationDepth=9
Can anybody point a finger where the error line is? According to the documentation it should work fine.Maybe the driver name is wrong? What driver I need then?
Cause I can't find it.
I'm really sorry to bother, guys :) Let me know if you get some ideas about it (metalink didn't help).

OK, several things wrong here. First the odbc.ini is not meant to be used for Oracle databases, that's not supported on Linux. On Linux you should OCI (Oracle native drivers) and nothing should be added on odbc.ini. Your user.sh seems to be pointing to your DB installation path. This is not correct. It should point to your Oracle client installation so you need to install the Oracle FULL client somewhere. Typically this is normally done with the same OS account as the one used for OBIEE whereas the DB normally runs with the oracle account. Once you got the client installed test it under the OBIEE account doing tnsping and sqlplus to your DB. Also the LD_LIBRARY_PATH should point to $ORACLE_HOME/lib32 not lib as the lib directory is the 64bits and OBIEE uses the 32bits libraries even in 64bits OSes. Finally change your RPD connection to use OCI. Make all those changes and you should be good.

How do I change the Data Source? Please help

Hello Everyone,
Can anyone provide me the steps to change the extractor for a data source? Here is the situation; we have a Z data source and under data source display transaction RSA2, I see that the extraction methods is V (Transparent table or DB View) and the extractor is a Z table which we maintain in R/3 for mapping the SAP g/l accounts to Hyperion accounts. Since, we have introduced/created a new Z table in R/3 for SAP to Hyperion accounts mappings because of changes in Hyperion reporting system the BW system has no latest data/data from that is maintained in new Z table hence, it is appearing to me that once I update the data source with new Z table in the extractor will update BW with mapping information that is in the new Z table. Please let me know if I am wrong and suggest me the right way to deal with the above issue.
If updating the data source solves my problem then how do I go about doing that? Can I make the changes in R/3 production system directly or have to come through transport? Please provide me the steps to make those changes. Points will be awarded for the help.
Thanks in advance,
Kumar

Hi Ravi,
Here is what I meant for change in mapping and new mapping
1. For example R/3 account 1234 is mapped to Hyperion account ABC in old Z table and that was copied to new Z table since, we want to use that new Z table going forward but, in the new table the mapping is changed i.e., R/3 account 1234 mapped to Hyperion account XYZ
2. All new accounts created in R/3 after we started using new Z table are mapped to the Hyperion accounts only in the new Z table, meaning all the new mappings are only updated in new Z table.
Please reply.
Thanks,
Kumar

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

What is the data source to populate ODS 0FIGL_O10

Similar Messages

Maybe you are looking for