What is the deal. I'm trying to request service for my Ipod and everytime I go through everything and submit it, it says "Sorry we can't process your request at this time..." I have tried numerous times and am getting very frustrated. Please help.
What is the deal? I'm trying to request service for my ipod touch and every time I go through everything and submit it, it says "Sorry we can't process your request at this time..." I'm getting very frustrated. Please help.
Thanks for the detail.
I believe you are doing your best, in the right place. How long have you tried ?
May be the sistem in your area is really busy. Can you wait few hours or contact them with a Message ?
Or try a Service provider http://support.apple.com/kb/HT1434
Similar Messages
-
what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.
I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao. -
Question
Help!! When I open my gmail text is v. small.I have tried zoom Ctrl 0 still nothing. I would appreciate details on how to fix this. I have Windows XP Firefox 3.6.12 version. Please help me. It may be plugins causing trouble but I don't know how to disable them.To try disabling Plugins and extensions, Open Firefox in Safe Mode. If you don't know to access Safe Mode, Click Start Menu, click All Programs, Click Mozilla Firefox and select Mozilla Firefox (Safe Mode).
-
The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667
http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e
-
my 2008 macbook will not turn on. the light on the corner is on. not flashing but on. its fully charged and has lion on it. please help! my classes start Monday and i need it before then!! It will turn on for a coupe seconds, and then turn off.
Take it into an Apple store for evaluation.
-
i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast
First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty. -
Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.
Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.
-
I have iphone 4s sprint, i did update all for 4 apps and they got stuck, I have tried to hard reboot and did delete the apps from usage under settings but they came back and there is no way to delete and even if i try to install it says installing so can't do anything..
Please helpTodd, have you "thrown the switch" to tell Palm Desktop to direct the data to Outlook?
Start Button/All Programs/Palm/PIM Conduit Sync/Sync with Outlook.
You said you're "using the Outlook 2007 Conduit" -- does this mean you installed the Outlook 2007 Update on top of Palm Desktop 6.2.2? If so, that may be a problem as 6.2.2 comes with 2007 compatibility built into it!
I have read several posts recently where a user made the same mistake, and it caused some problems. If throwing the switch above does not fix things, I'd uninstall/reinstall Palm Desktop, but do NOT install the Outlook 2007 patch.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
my ipod touch has been on the charger for about a week now, before that it was working in perfect condition until it died, now the ipod just shows the apple sign and then switches to the sign that means less then 20% battery, it wont turn on! please help me fix it! it wont even connect to itunes
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Well, the title pretty much says it all. I have an issue concerning grainy pictures.
First, let me give a brief introduction on what kind of project we are dealing with here. As I have been reading these forums for hours for the past days I already have a good understanding of what is of importance, so further details below.
Introduction:
Video editing started to become a real hobby. I learned to edit using Pinnacle studio, but the numerous bugs and flows forced me to try something else. Adobe to me is 'the real deal' and you only learn to use a program like PrE by just doing it! So for this project I thought I might give it a go:
I am editing a video of my uncle's funeral. The funeral has been taped for grandchildren-yet-to-come. All (but one clip) has been filmed using the same camera. However, I do not have access to the camera and I am not the camera man. When music was played during the funeral, the camera was not rolling, so I added this music myself and put a slideshow (which was shown on the day itself) during the music.
During the project I made several quick, medium quality renders to show my cousin (who's dad has passed away) the progress I was making. During these renders, I could not note any photo quality issues. Ofcourse also because of the low quality render settings.
Anyway. When I finished editing I was pretty happy with the end result. My cousin approved so I decided to burn it onto a DVD so it could be further distributed to the rest of the family. Burning failed initially, but later after a reboot everything worked fine. Then I played to DVD on my TV and found out that the quality of the pictures used in the slideshows was horrible. I could not even recognise faces, it was that grainy!
First. The 'specs':
Camera used: Sony DCR55
Project settings: PAL > Hard disk, flash memory camcorders > Widescreen 48kHz (I live in a PAL region: Netherlands)
UNchecked: Force selected Project Settings on this project
Then the photos part:
All photos JPG
So, onto the part of 'what I have already tried' (and failed, otherwise I would not have been typing this)
What I have tried so far after reading dozens of discussions:
1) Check if the DVD burner was not to blame. So I burned to a folder on my HDD. Similar result as to what I see on my TV when I burn it onto a DVD and play it.
2) Recheck project settings. Everything seems OK to me. Also when I use right-click on the added clips to check whether settings are still OK. They are. Also for the pictures, which surprised me because the widescreen video clips use non-square pixels and the photos obviously don't. (Thumbs up for Adobe)
3) Resize pictures to used resolution (720 x 576) before adding them. No improvement, exactly the same.
4) Turn off 'scale to 'framesize'. No difference.
Finally, I want to address the term 'quality'. Below you will find a scaled down image to the same resolution as mentioned before, compared to a still of the DVD:
Upper pic is rescaled using MS paint. Still looks pretty sharp.
Bottom is a still from the DVD file. Note the 'graining' and the horizontal lines.
This leaves me with 2 questions:
1) What can I do to get rid of the poor quality pictures
2) Why do I lose horizontal pixels (as can be seen in the bottom picture)
If anyone could help me, it would be greatly appreciated!!!!!Dear ATR,
I apologize for my late response. I was on holiday
A.T. Romano schreef:
Question...Your camera is a miniDV camcorder....what did you capture from it and into what....
Did you do a DV data capture firewire into Premiere Elements Capture Window to get DV.avi Widescreen (any mention of Type 1 or Type 2)
or
Did you do HDV data capture firewire into Premiere Elements Capture Window to get HDV (MPEG2.mpg)
From your description of your video (720 x 576) it would seem your captures gave you DV AVI Widescreen. Is that correct?
In your run throughs so far, has the video presented as poorly as the jpegs?
Add On...In those last 3 screenshots, what were the resolutions
Still resized - 1920 x 1080?
DVD-VIDEO screen capture of video? - 720 x 576 16:9 which would display after encoding about 1054 x 576
MP4 - ?
First. The camera is not a miniDV camcorder, but a harddisk recorder, which is why I chose that particular preset (PAL > Hard disk, flash memory camcorders > Widescreen 48kHz). source: http://www.sony.lv/support/en/content/cnt-specs/DCR-SR55E/list
So it's fairly easy. Shoot video's. Connect to PC and just copy paste the video files of the camera onto the computer.
This gives a resolution of 720x576. With a pixel aspect ratio of 1,4587 (as shown by PrE, when I click on a clip > show properties)
The video does not really look that bad. Actually there is hardly any noticeable difference between the original un-editted videos and the edited complete version.
Concerning the 3 screenshots.
The first is the same as before: a rescaled image using MS Paint. Scaled from original 3264 x 1836 to 1024 x 576
The second is a capture from the DVD file (which was burned to a folder)
The third is a capture from a created MP4 video file
Clearly photo 1 is the best. Photo 3 is still acceptable to me, but photo 2 (DVD) is unacceptable if you ask me.
Hope this new info helps. Thanks for your efforts so far. -
How can I stay in the timeline view and not switch to instrument view when i press the record button in garageband 1.2 on ipad 2 ? I know it's possible because i did it by accident,but now i cannot figure out how to do it again. It's driving me insane......please help!!!
After having experienced similar problems and having it back to work, I have a few suggestions:
- Try to find out if the syncing stops at a particular track or song. That might - out of the blue - have gotten corrupted in one way or another. Since that song will not be on the iPod, iTunes will try over and over to put it on and crash in one way or another;
- reformat the iPod as described in the iTunes 9 crash-thread. It takes time (at first it seems to do nothing, but that is because the green bar is moving with very small steps);
HTH -
The iOS 5.0.1 won't download for my ipod and now i can't open any of my apps. HELLPPPP!!!!!!!!!!!
I'm trying to download the new iOS 5.0.1 for my ipod touch and it keeps telling me that i need to check my internet settings even though my internet is fine. And now I can't use any of my apps they just flicker and go back to the home screen..
- For the download, disable the computer's security software during the download and update.
- For the other problem:
--- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
--- Download/install a new app.
--- iOS: Troubleshooting applications purchased from the App Store -
Have a big problem with report. Very urgent please help
I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
AshaYou might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team -
please help!
Check system preferences > mouse. If you're on Lion, the secondary click can be set to the left or right click.
Also this also happens when the CNTL key is held down (or stuck).
Regards,
Captfred -
What is the right way to do a sysprep Image for Windows 7 and 8
Hi,
i´d like to know which way is the right one to do a sysprepp from an System with Windows 7/8.
Is it ok when I install the system with all drivers/patches etc. and after that I will open a command prompt with admin rights and choose the settings OOBE and Genrealize and Shutdown.
After that I create an Image with ImageX or Acronis and I´m ready to deplay it right? The local user which I created during the installaton should stay as an Supportuser.
So is ok or is there something wrong. Microsoft itself shows this way here:
http://technet.microsoft.com/en-us/windows/ee530017.aspx
But they write a lot of other faq´s where they discribe other ways. So what is now right and wrong?
Please don´t le my die stupid ;)
Regards,
The CoreHi,
Any update here? Have you checked the links above?
Regarding your concern, it is OK to install the drivers or patches before you Genrealize the image. And if we want to keep the drivers during sysprep in order to use it on the computers with the same hardware configuration, we should specify
PersistAllDeviceInstalls to true.
Important: When you set up your reference computer, Windows Setup installs drivers for any detected devices. By default, Windows Setup removes these drivers when you generalize the system. If you're deploying the image to computers that
have the same hardware and devices, you'll want Windows Setup to reinstall these same drivers. To keep these drivers on the computer during system generalization, set the Microsoft-Windows-PnPSysprep |
PersistAllDeviceInstalls setting to true.
The video shows the general steps using sysprep and imagex to capture the image. If you have no special requirements for drivers, or some applications need to be specific, just follow the steps. OOBE is a simple booting process, and audit mode is a process
to specific the image. More information, see:
Customize Windows in Audit Mode
Any other concerns?
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
CS6 Camera raw 7.0.0.308 : can't find manual defringe tool
CS6 Camera raw 7.0.0.308 : can't find manual defringe tool, only automatic by checking a box. The lens effect tool only offers custom and manual panel. No colors for manual defringing. ??
-
Hi, I need to retieve the number of records that will be retrieved by a query as follows. How can this be done? Is there a method to do it using native dynamic sql (open .. for .. using ) instead of DBMS_SQL (Because Native is faster than dbms_SQL )?
-
Noarchive mode to archive mode
Hi, I'm trying to backup my database in online mode. I've 2 instances: BDPROD and BDPROD2. BDPROD is already in archive mode. I'm trying to change BDPROD2, but when I shutdown the database and run startup mount, I received the error: ORA-12514: TNS:
-
I have a new Ipod Nano 7th Generation. When I plug the earphones in, there is no sound coming from the earphones, even thought the Ipod shows the song as playing. Any solutions?
-
Hi, I'm getting the error msg ORA-00054: resource busy and aquire with NOWAIT specified. This happens when I'm trying to delete a table.