What is the DebugTmp.txt that showed up on my computer?

In my documents folder I found a file called DebugTmp.txt, what is this? Is it a virus? What should I do about it?

what is this?
A file created by some third-party application that you installed.
Is it a virus?
No.
What should I do about it?
If you have no use for it, delete it.

Similar Messages

Change iHone icon that shows up in 'My Computer'

When I plug my iPhone 4s in to my Windows 7 laptop the icon that show in "My Computer" is of a digital camera. Is there any way to change this to an iPhone?

Your phone is a digital camera (among other things). The iPhone does not support disk mode, so the only thing that shows up in My Computer is the camera. Everything else is "read" through iTunes.

I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank

HT4623 I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3. That is the only update that showed up on itunes as available. The download took 3 hours and after that the phone is the same and does not show any sign of being updated. Please hel

I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3 That is the only update that showed up on itunes as an availiable update. The download took 3 hrs and after all of that the phone is the same showing no sign of being updated. We did turn it off and back on and still nothing. Can anyone please help and tell me what I need to do to update his phone. He is unable to update or downloaded apps or anything off of itunes at this point.
Thank you,
Tammy

So what happened to the phone during the process? It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed. Sounds to me like you've downloaded the update file but not actually installed it. The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.

The column on the far left that showed my iPhone setup and options is missing. How do I get it back.

I Had to reinstall iTunes. Now the column on the far left that showed my iPhone, setups, options and the like is missing. How do I turn it back on?

With the current version of iTunes the left-hand sidebar that you could get to show has been removed. Now when a device is connected you should get a device icon towards the top left of the iTunes screen next to the content type icons - click on that and you should get a list of categories down the left-hand side for the phone, one set selecting and syncing content from your computer's iTunes, and then a second set for showing what is currently on the phone.
Does that device icon show ?

When using an external projector, the only thing that shows up on the screen is my desktop screen

When I'm presenting using an external projector, the only thing that shows up on the view screen is my desktop screen. It will also display a powerpoint file, but only in slide show mode. No other files (word, excel, etc) or safari will display. How can I get what I see on my computer screen to show up on the external screen?

Check out this support site about using two monitors, since that's what you're doing when you're projecting:
http://support.apple.com/en-us/HT202351
You can either set it to "mirror" or arrange the monitors side by side. Then when you want to show the working window on your projector slide it in the direction you set as the second monitor. Many teachers will do this to show a video or powerpoint to their class while working on another document or answering emails.

What is the orbrandom.txt file?

I've seen that in some cases, in the instance config directory there is a modified file called orbrandom.txt. For that reason, the administration console asks for applying changes to the instance because this file has changed.
What's the purpose of that file and what is the reason because is modified so many times?
Thanks in advance, JM.

Before applying changes:
[root@webs2-t config]# ls -rtl
total 168
-rw------- 1 nobody nobody 2412 Feb 20 17:54 web-interna-obj.conf
-rw------- 1 nobody nobody 2388 Feb 20 17:54 server.xml
-rw------- 1 nobody nobody 2887 Feb 20 17:54 server.policy
-rw------- 1 nobody nobody 16384 Feb 20 17:54 secmod.db
-rw------- 1 nobody nobody 2412 Feb 20 17:54 obj.conf
-rw------- 1 nobody nobody 9153 Feb 20 17:54 mime.types
-rw------- 1 nobody nobody 518 Feb 20 17:54 magnus.conf
-rw------- 1 nobody nobody 466 Feb 20 17:54 login.conf
-rw------- 1 nobody nobody 160 Feb 20 17:54 keyfile
-rw------- 1 nobody nobody 16384 Feb 20 17:54 key3.db
-rw------- 1 nobody nobody 14732 Feb 20 17:54 default-web.xml
-rw------- 1 nobody nobody 400 Feb 20 17:54 default.acl
-rw------- 1 nobody nobody 1527 Feb 20 17:54 certmap.conf
-rw------- 1 nobody nobody 65536 Feb 20 17:54 cert8.db
-rw------- 1 nobody nobody 322 Feb 26 12:49 orbrandom.txt
[root@webs2-t config]# lsof orbrandom.txt
lsof shown nothing.
After applying changes:
[root@webs2-t config]# ls -rtl
total 168
-rw------- 1 nobody nobody 2412 Feb 26 17:12 web-interna-obj.conf
-rw------- 1 nobody nobody 2388 Feb 26 17:12 server.xml
-rw------- 1 nobody nobody 2887 Feb 26 17:12 server.policy
-rw------- 1 nobody nobody 16384 Feb 26 17:12 secmod.db
-rw------- 1 nobody nobody 405 Feb 26 17:12 orbrandom.txt
-rw------- 1 nobody nobody 2412 Feb 26 17:12 obj.conf
-rw------- 1 nobody nobody 9153 Feb 26 17:12 mime.types
-rw------- 1 nobody nobody 518 Feb 26 17:12 magnus.conf
-rw------- 1 nobody nobody 466 Feb 26 17:12 login.conf
-rw------- 1 nobody nobody 160 Feb 26 17:12 keyfile
-rw------- 1 nobody nobody 16384 Feb 26 17:12 key3.db
-rw------- 1 nobody nobody 14732 Feb 26 17:12 default-web.xml
-rw------- 1 nobody nobody 400 Feb 26 17:12 default.acl
-rw------- 1 nobody nobody 1527 Feb 26 17:12 certmap.conf
-rw------- 1 nobody nobody 65536 Feb 26 17:12 cert8.db
[root@webs2-t config]# lsof orbrandom.txt
All files are now modified with the actual date and time.
I'm using a weblogic plugin to connect with the application server, and a couple of times I've seen that the modification date matches a connection error as shown on the error log:
[21/Feb/2008:15:11:20] info ( 4212): CORE3274: successful server startup
[26/Feb/2008:12:49:38] info ( 4212): for host 10.25.59.28 trying to GET /admin/, wl-proxy reports: Debug is disabled [(null)]
Now, I'm suspecting from the weblogic plugin.
Best regards.

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

What is the volume 'ldap_bk' that Mounted and Unmounted every hour or two?

What is the volume 'ldap_bk' that do Mounted and after 5 to 10 secs Unmounted ? This happen every hour or two.

I am getting similar kernel panics, usually once a day, on my 2006 Xserve running 10.6.8 server. I have 6 ECC enabled 2GB sticks installed, with DIMM slots 7 & 8 empty. All DIMMS show no ECC errors. The first for slots are filled with RAM from vendor A, with slots 5 & 6 filled with RAM from vendor B.
panic(cpu 3 caller 0x28fc2e): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x10, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/i386/pmap.c:3572

What is the "iTunesHelper" App that is set to launch at startup?

What is the "iTunesHelper" App that is set to launch at startup?
What does it do? Do I need it, or is it something I don't need or want?
It is not only set to start at startup, but it is also set to be "invisible".

It's inside the iTunes package.
Control-click on iTunes and choose 'Show Package Contents'
Then navigate to Contents>Resources. iTunesHelper itself is also a package.
The preferences and .plist files don't give me a clue about exactly what it is doing.
The link provided by William is a possible (and plausible) explanation.
Afaik there is no official document from Apple, explaining what it does.
If you disable it, your iPod (if you have one) will not launch iTunes if necessary.
M

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

HT1212 Hello. I'm having a problem with my mini iPad. When I went to sign on yesterday the number pad moved up and now it is out of site. I can't sign on the only thing that shows is the Apple logo.

Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.

Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if it helps.

I opened a file on my desktop that I don't remember putting there. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

I opened a file on my desktop that I don't remember putting there. We use many photos and I thought it was a photo file I was looking for. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

Interesting tid bit. I created an AAC of the original file, deleted the original MP3 from my library and also deleted the Clean matched track from the icloud.
Result is that it matched with the explicit version of Mrs. Officer this time.
What I am curious about is which songs this is happening for. I've went thru a few batched of about 500 songs at a time and redownloaded in 256k for many tracks. Sadly we don't have people to bring this to our attention and I have so much music that it's impossible to go thru every song to make sure I am getting the right version.

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

Sorry but you cant

What is the DebugTmp.txt that showed up on my computer?

Similar Messages

Maybe you are looking for