What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?

What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?
reagrds

Hi,
You can check the default values from the below file
/usr/sadm/defadduser
and from this command
#useradd -D

Similar Messages

What is the default group of a user created in OID

Hi All,
we integrated EBS with OAM11g(it integrated with OID 11g).
Whenever we created user in EBS is reflecting to OID,But this user is not able to login into OAM.Whenever we assaign the newly created user to 'Administrator, group only able to login into OAM because of we specify 'Administrator' as administrator group.
So now how to set the default group is Administrator for newly flowing users from EBS.
Any idea really appreciated,
Thanks in advance,

stevenray1 wrote:
Is the resolution of a photo created in Photo Booth under user control, or is there a single default (and if so, what is that)?
640 x 480 (drug one to the desktop and checked it )
Can the resolution (default or otherwise) be improved in iPhoto?
No
You can export it from iPhoto as a JPEG with a different resolution but can not change the resolution in iPhoto - and increasing the DPI does not increase the resolution of a photo - you can not add quality that is not there
LN

The keypad does not come up while adding new phone number to contact

I use iphone4. After I upgraded to ios7 finding lot sof issues. The biggest irritating issue is if I want to add a new number (after dialing this number or receiving a call from this number or receiving a sms from this number) and press add to contact, the contact place holders come up but if i click on the typing place the soft keybord does not come up. Funny thisg is it comes up sometimes. But not most of the time ! Lets solve this first before we get onto the more nuanced issues.

Try going to settings to General to reset to 'reset all settings'
This should do the trick!
Good luck

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

Where is the default group information stored for a portal user?

Hello -
There is a field in the WWSEC_PERSON$ table called DEFAULT_GROUP, and it is populated with an ID from the WWSEC_GROUP$ table but it seems like there is more to the overall picture here.
If I try to manually update a users group via SQL,
UPDATE WWSEC_PERSON$ SET DEFAULT_GROUP = 318 WHERE USER_NAME = 'XXXXXXX'
Then check the portal profile for the user 'XXXXXXX' I do not see their 'Default Group' as being updated. (However the default group is in effect because these users are sent to the correct group when they log in.
What do I need to modify for the group name to show up for the user on their profile page?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

What is the default log filename for connector logging in Weblogic 9.x?

According to the JCA 1.5 Specification -
The ApplicationServer manages the association of output stream with the ManagedConnectionFactory.
http://java.sun.com/javaee/5/docs/api/javax/resource/spi/ManagedConnectionFactory.html#setLogWriter(java.io.PrintWriter)
So setLogWriter() is called by WebLogic 9.x for the ManagedConnectionFactory.
My observation is that even if no <log-filename> is specified in weblogic-ra.xml of the resource adaptor , the value of the PrintWriter set on the ManagedConnectionFactory is not null
eg java.io.PrintWriter@404c51.
So my question is that in case no <log-filename> entry is specified in weblogic-ra.xml of the resource adaptor , what is the default value of the logfile to which the connector logging messages will be redirected?

your home folder should have the permissions set as you state them.
Everything inside your home folder (like Music, Documents and others) should be more like
you: read&write
staff: no rights
everyone: no rights
but if you are the only user of your Mac, these settings have little importance to you.
to repair the permission boot into recovery (pressing command + R before you hear the start up sound. Then start Disk Utility from the Utility menu and choose Repair permissions. See this article for a detailed set of instructions. It's a little older, but still valid-

What is the failure group in ASM and the meaning of ASM assigns each disk

Hi
Please help me in understanding
what is the failure group in ASM and the meaning of "ASM assigns each disk to it's own failure group, by default"

As you may have known ASM uses mirroring and striping of files. Mirroring is storing same compies/parts of files in different disks/controllers. When creating disk group which could consist of several disks, you have to assign disks at least to separate failure groups for normal redundancy , or three failure groups for High redundancy. This means that ASM will never assign mirrode copies/pieces of files to the same failure group. So, assigning disks to different failure groups you make sure mirrored copies are not on the same physical storage. Saying with other words, failure group gives your more abstract meaning based on which you can organize your physical disks contained in disk group.
That is why for normal redundancy at least two failure groups are needed, because there are one mirrored copy of each extent(allocation unit, to be exact) and for high redundancy the requirement is at least 3 failure groups, because each allocation unit has 2 mirrored copies, which should be on different failure group, consequently.
Hope, this explanation is helpful.

What is the default password for SDM in SP15

Initial password for SDM
Posted: Mar 22, 2006 2:40 PM Reply
I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
I tried giving the Portal passwword, but it does not seem to work
Thanks
Sharath

the default password is <b>admin</b>
Here's the document that talks about it:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a>

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

What are the default parameters for PER_EVENTS api

Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

What is the default port on visual administrator with 2004s

Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JF

Hi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful

What is the default value of EO_INBOUND_PARALLEL

Hi Gurus,
We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck in queues, I have seen more than one XBTI8 queues.
Please help me with my doubt. thanks!

Hi,
Thanks for the replies.
How about the parameter EO_INBOUND_TO_OUTBOUND and EO_OUTBOUND_PARALLEL?
I assume by default EO_INBOUND_TO_OUTBOUND is set to 1?
Then what is the default value for EO_OUTBOUND_PARALLEL? Plus to set this parameter you need to specify the receiver, in this case, is it true that EO_OUTBOUND_PARALLEL is not set at all so only one outbound queue? this does not make sense. Or maybe by default EO_INBOUND_TO_OUTBOUND is set to 0 so EO_OUTBOUND_PARALLEL is not used at all?
Thanks.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?

Similar Messages

Maybe you are looking for