What is the default group of a user created in OID

Hi All,
we integrated EBS with OAM11g(it integrated with OID 11g).
Whenever we created user in EBS is reflecting to OID,But this user is not able to login into OAM.Whenever we assaign the newly created user to 'Administrator, group only able to login into OAM because of we specify 'Administrator' as administrator group.
So now how to set the default group is Administrator for newly flowing users from EBS.
Any idea really appreciated,
Thanks in advance,

stevenray1 wrote:
Is the resolution of a photo created in Photo Booth under user control, or is there a single default (and if so, what is that)?
640 x 480 (drug one to the desktop and checked it )
Can the resolution (default or otherwise) be improved in iPhoto?
No
You can export it from iPhoto as a JPEG with a different resolution but can not change the resolution in iPhoto - and increasing the DPI does not increase the resolution of a photo - you can not add quality that is not there
LN

Similar Messages

  • What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?

    What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?
    reagrds

    Hi,
    You can check the default values from the below file
    /usr/sadm/defadduser
    and from this command
    #useradd -D

  • WHAT IS THE DEFAULT PASSWORD FOR GUEST USER

    what is the default password for guest user?

    There is no default password for a guest user unless you've created one:
    (screenshot from the System Pref Guest User Pane)

  • What is the default password after creating a user with wwsec_api.add_portal_user ?

    Hi,
    I created 850 Portal users with the WWSEC_API calls in PORTAL30 and PORTAL30_SSO. I can logon with an account if manually reset the password for a specific user. But what is the default password of a user after creating it with the API calls ? I tried "password" and the username, but that didn't work.

    The WWSEC_API should not be used to create the user account in the SSO schema. As you noted the WWSEC_API calls do not set the password - these are intended to be used only for setting up Portal profile information. For creating the user that can log in, use the Login Server APIs - in sso/ssoumgt.pks:
    WWSSO_APP_USER_ADMIN.CREATE_USER.

  • Need to know what is the default password for sysman

    Hi
    I just like to know what is the default
    password for "sysman" user in the Enterprise Manager version 2.1.
    thanks in advance
    null

    Venkil,
    The default password for sysman is oem_temp.
    Regards,
    John

  • What is the default admin user account login id and password in Windows 8?

    Hi all,
    The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
    What is the default admin user account login id and password in Windows 8?
    Or 
    Is there way to change the User role for the account?
    Please use Marked as Answer if my post solved your problem and use
    Vote As Helpful if a post was useful.

    I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
    What is the default admin password. How can i reset it form my user account
    C:\Users\Amit>net user Administrator
    User name                    Administrator
    Full Name
    Comment                      Built-in account for administering the computer/domain
    User's comment
    Country/region code          000 (System Default)
    Account active               No
    Account expires              Never
    Password last set            7/26/2012 12:57:03 PM
    Password expires             Never
    Password changeable          7/26/2012 12:57:03 PM
    Password required            Yes
    User may change password     Yes
    Workstations allowed         All
    Logon script
    User profile
    Home directory
    Last logon                   9/16/2013 1:16:30 PM
    Logon hours allowed          All
    Local Group Memberships      *Administrators
    Global Group memberships     *None
    The command completed successfully.

  • Where is the default group information stored for a portal user?

    Hello -
    There is a field in the WWSEC_PERSON$ table called DEFAULT_GROUP, and it is populated with an ID from the WWSEC_GROUP$ table but it seems like there is more to the overall picture here.
    If I try to manually update a users group via SQL,
    UPDATE WWSEC_PERSON$ SET DEFAULT_GROUP = 318 WHERE USER_NAME = 'XXXXXXX'
    Then check the portal profile for the user 'XXXXXXX' I do not see their 'Default Group' as being updated. (However the default group is in effect because these users are sent to the correct group when they log in.
    What do I need to modify for the group name to show up for the user on their profile page?

    Yannick -
    Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
    To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
    Thanks again.

  • What is the default user name and password for oracle databse 10g

    Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
    thanks

    system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
    In case passwords have been forgotten, those can be reset:
    From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
    OS> sqlplus / as sysdba
    SQL> alter user sys identified by yourNewSysPassword;
    SQL> alter user system identified by yourNewSystemPassword;
    And you're done with it.
    HR Madrid

  • What should the default tablespace be for SAP users

    I'm using Oracle 10.2.0.4
    For the users
    OPS$<SID>ADM
    OPS$ORA<SID>
    SAP<SID>
    what should the default tablespace be
    PSAP<SID>USR or PSAP<SID>

    Hello Bill,
    > For the users
    > OPS$<SID>ADM
    For this user the default tablespace is SYSTEM
    > OPS$ORA<SID>
    For this user the default tablespace is SYSTEM
    > SAP<SID>
    For this user the default tablespace is PSAPPRDUSR
    Regards,
    Federico Biavati

  • What is the default user and password on linksys wrt54gr

    what is the default username and password on my linksys wrt54gr.. i've tried admin and admin and that does'nt work.. any ideas???

    If you have setup the routers bridging into the same LAN (i.e. the LAN-LAN connection and not using the internet port on the second router as I have suggested in the link above) and with the wireless settings you have mentioned you should have a wireless roaming network. Make sure you have SSID broadcast enable on both routers.

  • What is the default for the "Display PDF in Browser" setting?

    What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
    Also, are any statistics available on what proportion of users have this setting set to on?

    For all three the default is "checked".
    Be well...

  • What is the default port on visual administrator with 2004s

    Hi
    I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
    I want to lauch the visual administrator but unable to connect
    its saying cannont connect to ip and port....
    What is the default port for the first time login
    Also,
    went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
    JF

    Hi Jean
    The default port for VA is 5XX04 (where XX is the instance number)
    the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
    Hope this help
    Juan
    Please reward with points if helpful

  • What is the default staging mode when it is: (not specified) ?

    Hi All,
    What is the default staging mode when none is specified?
    As per docs, there are three: stage, no stage and external stage
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e13952/taskhelp/deployment/SetAServerStagingMode.html
    Many thanks.
    Running Weblogic 10.3.5.0 on OEL.

    "stage" directory means that the EAR file will be temporarily copied to that location and will be used only when the application source directory is not available OR when the administration server is down.
    It is like a local copy of the source directory for your application.
    Sometimes, during restart/redeployment, the managed server could pick the application files from the stage directory.
    But, in general if you use the "Update" option in "Deployment", the files in the stage directory are replaced by the files from the "source" directory.
    What I suspect here is in PROD, if you might have any permission issues with the stage directory?
    Can you please check that the stage directory is owned by the user running the server process AND that the directory permissions is set to 755. And not only directory the files also should inherit the same ownership and permissions.
    That is the only thing I can suspect.
    Arun

  • How to set DEFAULT GROUP for a user when I create a user manually thru pl/s

    Hi Gurus,
    I am creating portal user accounts and groups thru pl/sql calls to
    portal.wwsec_oid.create_user_entry
    portal.wwsec_api.ADD_USER_TO_LIST
    I didn't find any parameters to set the DEFAULT GROUP for the users. I want to set the default group for all my users. I don't want to do it thru portal. Cuz, We have around 1600 users. Please post a reply if you have some info about how I can set this thru code.
    Thanks
    Raj

    You can achieve that using 'wwsec_api.set_defaultgroup'....

  • What is the default time settings in Process chains

    Hi,
    What is the default time settings in Process chains.
    How to set time settings for daily,weekly,monthly loads in Process chains.
    What is the time settings that we have to take care when creating meta chains.
    Thanks,
    Madhu.

    Hi Madhu,
    The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
    Thanks and Regards
    Subray Hegde

Maybe you are looking for