What is the default port on visual administrator with 2004s

Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JF

Hi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful

Similar Messages

  • What is the default/factory brightness that comes with a Macbook?

    Bought the Macbook in early 2010. Just wondering because I always change it and wanted to know the default/factory setting it comes with when you buy it.
    Message was edited by: LakV

    It's best to start a new thread when you have a question. The settings your looking for is under *System Preferences* then go to *Energy Saver*. There you can change the settings so the display never dims.

  • What is the default staging mode when it is: (not specified) ?

    Hi All,
    What is the default staging mode when none is specified?
    As per docs, there are three: stage, no stage and external stage
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e13952/taskhelp/deployment/SetAServerStagingMode.html
    Many thanks.
    Running Weblogic 10.3.5.0 on OEL.

    "stage" directory means that the EAR file will be temporarily copied to that location and will be used only when the application source directory is not available OR when the administration server is down.
    It is like a local copy of the source directory for your application.
    Sometimes, during restart/redeployment, the managed server could pick the application files from the stage directory.
    But, in general if you use the "Update" option in "Deployment", the files in the stage directory are replaced by the files from the "source" directory.
    What I suspect here is in PROD, if you might have any permission issues with the stage directory?
    Can you please check that the stage directory is owned by the user running the server process AND that the directory permissions is set to 755. And not only directory the files also should inherit the same ownership and permissions.
    That is the only thing I can suspect.
    Arun

  • What is the default admin user account login id and password in Windows 8?

    Hi all,
    The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
    What is the default admin user account login id and password in Windows 8?
    Or 
    Is there way to change the User role for the account?
    Please use Marked as Answer if my post solved your problem and use
    Vote As Helpful if a post was useful.

    I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
    What is the default admin password. How can i reset it form my user account
    C:\Users\Amit>net user Administrator
    User name                    Administrator
    Full Name
    Comment                      Built-in account for administering the computer/domain
    User's comment
    Country/region code          000 (System Default)
    Account active               No
    Account expires              Never
    Password last set            7/26/2012 12:57:03 PM
    Password expires             Never
    Password changeable          7/26/2012 12:57:03 PM
    Password required            Yes
    User may change password     Yes
    Workstations allowed         All
    Logon script
    User profile
    Home directory
    Last logon                   9/16/2013 1:16:30 PM
    Logon hours allowed          All
    Local Group Memberships      *Administrators
    Global Group memberships     *None
    The command completed successfully.

  • Changing the default port 1433 in SQL 2005 on an ECC 6.0 system

    Hello everybody,
    There is a requirement to change the default port of MS SQL 2005 from 1433 to a different port.
    I am using SAP ECC 6.0 running on an ABAP stack. I would like to know what changes need to be done from the SAP end to achieve it.  Any pointers in this regard would be helpful.
    Regards
    Dinesh K

    <b>Sizing</b>
    Hardware sizing should be completed by your SAP partner. Its based on many things. Users, modules, storage volumes, peek, BP, workloads etc etc.
    You can do the 'noddy' version with the sapsize on OSS. The output from this is in 'SAPs' you could look up std systems bench marks and get something 'like' it. Else submit the results to the hardware vendor of your choice and they will do it for you.
    <b>System Redundancy</b>
    Depends what you are trying to do.
    MSCS is a fail over HARDWARE only solution. ie if you want to patch or take a node out of service you can by 'failing over' the services on it to the other node. If you get a DB problem MSCS can not help you at all.
    Log shipping gives you 'rapid' recovery options for SQL(and there in SAP). The way this normally works is via either manual or automatic log-shipping to a 'standby' system with SQL/SAP loaded on it that can be brought online if you get a problem with the main system.
    A well planned system will have fail-over and recovery capabilities, ie it will use BOTH.

  • Time Capsule: What is the default password?

    I just got my new time capsule and I have set it up as my wireless router, and that seems to work great, but I tried setting it up to use as my back up hard drive and it asks me for a password. I was never prompted to set one up so I am unsure what the password is. Does anyone know if there is some sort of default password?

    Hello linlaurel. Welcome to the Apple Discussions!
    Does anyone know if there is some sort of default password?
    Yes, the default Time Capsule's Administrator's password is: public

  • Yosemite Mail Connections to the server on the default ports timed out.

    I have upgraded two machines to Yosemite and I am having huge problems with Mail. It works perfectly well with my .mac mail but it does not work with my xServer running OS X server 10.6.something. I have little triangles but the mail account and I get the message "Connections to the server “mailgate.cp-lighting.co.uk” on the default ports timed out."
    Any machine running an older version of OS X has no problems connecting.
    The machine running Yosemite all have the same problems, they all have the triangle, they all receive mail but if you read it or delete it, it re-appears as unread so I can receive 20 emails read then delete 6 and a few minutes later I have 20 unread emails again.
    Worse mail in the outbox get stuck behind a queue so it takes ages to send any mail, if I look at activity viewer I can see processes constantly running "Moving Messages" , "Synchronizing Sent", "Updating Cache directory"[sent] , "changing flags" and finally "Updating Cache directory"[Inbox]
    If I go to mail and preferences/accounts I cannot edit the incoming mail server it is greyed out. I wanted to change the domain nane for the ip address of the server to see if that made any difference but it is not possible. I don't understand what Apple have done it is a nightmare.
    Is anyone else having these problems?

    Yes, my husband has had this problem too with his IMAP email account. He is temporarily using Thunderbird, which is working better, but it is also reporting lost connections. Seems the issue is deeper within the networking or security services of Yosemite than the Mail app itself.

  • What is the default maximum email attachment size (Exchange 2003) on iPads?

    What is the default maximum email attachment size (Exchange 2003) on iPads?

    Maximum message size is determined by the mail server (Exchange in your case), not by the Mail app on your iPad. There are two settings in Exchange 2003 related to message size: One for incoming messages, one for outgoing. Both can be set to Unlimited, or to some number of kilobytes Exchange 2003 is a long time ago for me, but if I remember correctly the default size limit is 10240 KB (10 MB). Once those are set, the admin can also create policies to modify those limits for specific situations. You really need to ask your Exchange administrator how he/she has the max size configured.

  • What is the default user and password on linksys wrt54gr

    what is the default username and password on my linksys wrt54gr.. i've tried admin and admin and that does'nt work.. any ideas???

    If you have setup the routers bridging into the same LAN (i.e. the LAN-LAN connection and not using the internet port on the second router as I have suggested in the link above) and with the wireless settings you have mentioned you should have a wireless roaming network. Make sure you have SSID broadcast enable on both routers.

  • What is the default password on Pet Store 1.3 when rebuilt?

    I am unable to log into either the administrator client or the receiver application after rebuilding the WebLogic Server Pet Store Application. Neither jps_admin/admin nor rsvr/rcvr works. I saw a post referencing security.xml, but that file does not appear to be in this package
    The default passwords worked when I used just the Pet Store template and prebuilt application, but the admin client would wait forever trying to get data, even when the client was ran from the same box as the server.
    I am running WebLogic Server/Express 7.0 with SP7 for RHEL on Red Hat Enterprise Linux 4, Update 3 x86.
    What should the default login names be? Or even better, if someone has seen the admin client unable to get data, how do you solve that?

    On my painfully new 11.1.2 install, and per the install instructions, the username and password are as follows:
    epm_admin
    whatever you set up -- (As I only ever use one of three different ones when I do installs, it wasn't too hard to go through all of the possibilities)
    See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/frameset.htm?webLogicDomainName.html
    Regards,
    Cameron Lackpour
    Edited by: CL on Aug 3, 2010 11:14 AM

  • What is the default password for SDM in SP15

    Initial password for SDM
    Posted: Mar 22, 2006 2:40 PM    Reply 
    I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
    Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
    I tried giving the Portal passwword, but it does not seem to work
    Thanks
    Sharath

    the default password is <b>admin</b>
    Here's the document that talks about it:
    <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a>

  • How to change the default port of webdispatcher

    Hello Everyone,
    We wish to  know to how to change the default port of SAP webpatcher port from 81$$ to 80.
    Appreciate your response.
    Thanks,
    Vadi

    Hello Vadi
    you have to change the PORT value in your profile parameter from 81$$ to 80
    icm/server_port_0 = PROT=HTTP,PORT=81$$ to
    icm/server_port_0 = PROT=HTTP,PORT=80
    Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
    $$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
    thanks
    Bhudev

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • What is the default user name and password for oracle databse 10g

    Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
    thanks

    system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
    In case passwords have been forgotten, those can be reset:
    From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
    OS> sqlplus / as sysdba
    SQL> alter user sys identified by yourNewSysPassword;
    SQL> alter user system identified by yourNewSystemPassword;
    And you're done with it.
    HR Madrid

  • What are the different ports required to Deploy(Run) an application in NWDS

    Hi all,
    We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
    Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
    So my query is , to build,deploy and run or debug  a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
    (Note:  will the SDM port, debug port,Http port be enough to deploy and run an application)
    Need your help on this
    Regards,
    Vijay

    Hi Arun,
    Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
    Hope this Log details of the error that I get here helps you:-
    <i>Settings
    SDM host : "ServerName"
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
    Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
    Inner exception was :
    Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
    appreciate your valuable inputs.

Maybe you are looking for