What is the default screen brightness setting and keyboard backlight brightness default setting, and how to you go back to default?

What is the default screen brightness setting and keyboard backlight default setting? I just got a new Macbook Air and fiddled a lot with it, and now just want to know how to set the brightness levels back to default. Thanks everyone!

Hey sberman,
I maxed out the screen brightness before I clicked on "restore defaults" in system preferences> energy saver (which has to do with battery, not exactly screen brightness) to see if the screen went back to a "normal" brightness level, but it didn't. I don't think it restored the brightness to default..

Similar Messages

  • My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    Mac OS X: Gray screen appears during startup - Apple Support

  • My MacBook Pro has been having difficulties at startup.  It sometimes locks and doesn't get past the white screen.  It has also locked up several times and gotten a green stripes across the entire screen.  What is causing this and how do I fix it?

    My MacBook Pro has been having difficulties at startup.  It sometimes locks and doesn't get past the white screen.  It has also locked up several times and gotten a green stripes across the entire screen.  What is causing this and how do I fix it?

    You don't, take it to Apple for repair.
    This might interest you if it's too old to fix.
    My computer is not working, is my personal data lost?

  • What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
    Tools > Protection > Encrypt < Encrypt with Password
    Answer YES to change the security.
    A new window opens:
         Do NOT select Document Open (or that will require a password to open the document.)
         Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
         Change the following 2 settings from the drop-down box:
              Printing Allowed: Select High Resolution
              Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
              Leave selected: "Enable text access for screen reader devices for the visually impaired"
              Change Permissions Password (insert a strong password)
              Leave all other settings alone in "Options"
              OK - OK
              Re-enter the Permissions Password (the one you entered above)
              OK - OK
              Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

  • What is the best screen protector for the iPad 3 where was I put it on for me chits hard steps

    What's the best screen protector for the iPad three and reasonably priced. Why doesn't Apple just make wondering themselves.

    Invisible Shield by Zagg has always been my preference. 

  • What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?

    What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?
    Details
    Constantly, while using Firefox (Beta v 11.0), and/or ESPECIALLY, when I have my eMail @ Mail.com open, I get this PopUp stating: "For security reasons, restarting mail.com Mail is possible only via the mail.com Mail Service. Please close this window and restart mail.com Mail" BUT Then there is a CHECKBOX: "Prevent this page from creating additional dialogs."
    I have no idea if Checking this Box is a Good Idea or if it will Screw-Up my mail.com Mail Service...
    Anyone have an answer or explanation of the Use of this Little Check-Box?
    BJ Orden [email protected]

    You do not get any pop-up windows on that website if you tick that box.
    That setting is stored in the cache and you should see pop-ups again if you reload the page and bypass the cache.
    Reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)

  • HT1343 What is the print screen command on the keyboard?

    What is the print screen command on the Apple keyboards?

    Command-Shift-3 will take a picture of the entire screen.
    Command-Shift-4 to take a picture of any part of the screen.
    Command-Shift-4 and click the spacebar to capture a window or menu bar.
    Escape key to cancel.

  • I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    What do you not understand?
    You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
    Or
    However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
    you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
    LN

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

    I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution)   Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

    Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution)   Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

    You're welcome, and thank you for the reply.
    2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
    But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
    1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
    Thank's in advance again,
    André

  • Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
    Appe does not ship outside of the countries where it sells the phones.

  • What are the best storage systems to archive inactive (but still used) apps and files?

    What are the best storage systems to archive inactive (but still used) apps and files of all types? I already have a Time Casule which I back up on and I'm needing to create more space in my flash drive in my Mac Pro, so I need another external storage system I can use to archive all that I don't currently need. I may still wish to edit and use the files, and I am not very techy and am a broke student... so anything grossly expensive is a no-no for me (between $50 and $200 is idyllic). If you could simply post links of different good/useful hard-drives that I can use, I'd be thankful.
    Thank you
    p.s. I'm australian, so anything within this country would be great. Or I can deal with somewhere that has cheap shipping.   

    It's been moved and seconded. Any discussion? Yes:
    Buy two external drives. Use one for Time Machine. Be sure this drive is at least twice the capacity of your computer's hard drive. Use the second drive as a bootable clone of your computer's hard drive. Should something happen you can immediately get the computer up and running from the clone until your restore from the Time Machine backup. This is what is called redundancy. Should either backup drive fail, there's another to take its place. Backup redundancy is very important. You can never have too many backups.

  • What's the phone number I should call for help with my iPhone and ihome dock?

    What's the phone number I should call for help with my iPhone and ihome dock?

    http://www.ihomeaudio.com/support/

  • What is the difference in price of MacBook Pro 13-inch:   2.9GHz750GB and  256GB solid-state drive

    What is the difference in price of MacBook Pro 13-inch:   2.9GHz750GB and  256GB solid-state drive ?

    go to the Store and configure all the models with upgrades but... an SSD will be fast and responsive, no noise or heat and adds $200 probably to the cost
    macbook series forum though, are here (not here)
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

Maybe you are looking for

  • Job failing after start of process chain

    HI All i have proces chain based on sm37 job....but the chain is stucking at the Start process of the Proces chian and the Start process is in yellow... when  i check the status of the job in sm37.. it is showing as cancelled and it is showing in Rel

  • Updating ipad software

    I have an ipad 1 and I can't update the software. When in the summary page, after clicking on 'check for update' under version I would expect it to connect to the internet but instead it open a box asking to select a folder location from my PC - i.e.

  • Removing Items from Accounts Applet Menu

    If you select a user in the Accounts Applet, anr right click a menu becomes available. I am trying to remove the "Edit Capability" choice from this menu. Where can I find this?

  • Condition type for CST

    All SAP Gurus, Which condition type to be used for CST? (for example as we use JMOP for excise duty). Regards,

  • Open Excel and update the data in the Excelsheet

    Dear Experts, i load an Excel from the BDS to my Desktop and opan it Then should i update fields in the Excelsheet update with new values. Have somebody a sample Thank you Frank