What is the default time settings in Process chains

Hi,
What is the default time settings in Process chains.
How to set time settings for daily,weekly,monthly loads in Process chains.
What is the time settings that we have to take care when creating meta chains.
Thanks,
Madhu.

Hi Madhu,
The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
Thanks and Regards
Subray Hegde

Similar Messages

What are the default font settings for 7.0.1 I have messed with them a bit and now my text is blotchy. I want to start clean.

I tried to adjust font settings to a font that I prefer and a size I can read. It was all kind of messed up so I searched what the default settings should be to start at ground zero again which I found but now it is worse. The main issue is that text is blotchy, dark some places, light another. Monitor is new so it's not issue. What exactly are the Default settings for 7.0.1 I'm not sure mine are correct ??? What other things can I look at if the default doesn't improve everything? I have Windows 7 and turning clear text on or help has no effect. PLEASE HELP ???

You can see the defaults in a screenshot in this KB article:
* https://support.mozilla.com/kb/Some+text+shows+up+bold+after+upgrade
You can check the font setting in: Tools > Options > Content : Fonts & Colors > Advanced
Default Font: Times New Roman (16)
Fonts for : Western
Proportional: Serif (16)
Serif : Times New Roman
Sans-serif : Arial
Monospace : Courier New (13)
[X] "Allow pages to choose their own fonts, instead of my selections above"
Are there any problems reported in the Graphics section at the bottom of the Help > Troubleshooting Information page?
If you have an ATI graphics display try to disable "Morphological Filtering" in the Catalyst display driver:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

What are the default trackpad settings for the MacBookPro13 (Mid 2012'), What are the default trackpad settings for the MacBookPro13 (Mid 2012')

Could anyone answer the question above, with detail? I would like the defaut trackpad settings, and preferably others of the MacBookPro of the Mid 2012 model?
Im running OS X 10.8.2

your home folder should have the permissions set as you state them.
Everything inside your home folder (like Music, Documents and others) should be more like
you: read&write
staff: no rights
everyone: no rights
but if you are the only user of your Mac, these settings have little importance to you.
to repair the permission boot into recovery (pressing command + R before you hear the start up sound. Then start Disk Utility from the Utility menu and choose Repair permissions. See this article for a detailed set of instructions. It's a little older, but still valid-

What are the default display settings on MBP?

I have been working on finding the best setting for a new video projector in conjunction with my MacBook Pro.
So I found one - but then when I went back, restarting, the MBP, I thought I was going blind! I have tried a few settings in display, but at the moment they all look "off."
I want to go back to default -- can someone please tell me what that is?
Thanks!
Patty

The brightness is fine - what I am wondering about is
the resolution.
Is default 1440, 900 and Millions?
That seems to be about right now - feels better to
the eye!
Patty
Hi Patty,
Yes, that is the correct resolution. 1440X900 is default.

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What is the default username and password for a Airport Time Capsule 3TB

What is the default username and password for a Airport Time Capsule 3TB

There is no default user name on any of the AirPort routers, but the default password is......
public

Time Capsule: What is the default password?

I just got my new time capsule and I have set it up as my wireless router, and that seems to work great, but I tried setting it up to use as my back up hard drive and it asks me for a password. I was never prompted to set one up so I am unsure what the password is. Does anyone know if there is some sort of default password?

Hello linlaurel. Welcome to the Apple Discussions!
Does anyone know if there is some sort of default password?
Yes, the default Time Capsule's Administrator's password is: public

What is the default ip address for the Time Capsule and Airport Extreme?

What is the default ip address for the Time Capsule and Airport Extreme?

Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

What is the default lKE keepalive time in cisco ASA

Cisco says that by default IKE keepalive time is enabled in Cisco ASA. So what is the default lKE keepalive time in cisco ASA.

Hi Bro
Yes, you’re correct. Lifetime is a period when a VPN gateway rekeys just before the time expires. During the typical life of the IKE Security Association (SA), packets are only exchanged over this SA when an IPSec quick mode (QM) negotiation is required at the expiration of the IPSec SAs. The default lifetime of an IKE SA is 24 hours and that of an IPSec SA is one hour. Hence, if there’s no interesting network traffic that flows through the VPN tunnel for quite a while but the lifetime period is still valid, the VPN tunnel would not go down.
However, there is no standards-based mechanism for either types of SA to detect the loss of a VPN peer, except when the QM negotiation fails. Therefore, by implementing a keepalive feature over the IKE SA, Cisco has provided a simple and non-intrusive mechanism for detecting loss of connectivity between two IPSec peers. The keepalive packets are sent every 10 seconds by default. Once three packets are missed, an IPSec termination point concludes that it has lost connectivity with its peer.
P/S: If you think this comment is useful, please do rate them nicely :-)

What is the default passcode of iphone 4 for reset all settings

what is the default passcode of iphone 4 for reset all settings ?

Should just be 0000, as with most things with a passcode, until you change it.

What is the default timeout processing option in SSRS Server

Hi,
I am getting The operation has timed out error when trying to connect SSRS server sometime. So I would like to know what is the default timeout for report in seconds?
Thanks
Saikat

Hi Edward,
Thanks for your reply. I am using script task to connect web service. Below is the code I am using for generating reports connecting SSRS web service.
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://" + (Dts.Variables["ReportingServicesServerName"].Value).ToString() + "/reportserver/reportservice2005.asmx";
rsExec.Url = "http://" + (Dts.Variables["ReportingServicesServerName"].Value).ToString() + "/reportserver/reportexecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "PDF";
//string format = "WORD";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
// Path of the Report
// string fileName = (Dts.Variables["DestinationPath"].Value).ToString() + "/" + (Dts.Variables["ControllerID"].Value).ToString() + "_" + DateTime.Now.ToString("MMddyyyy") + ".pdf";
//In PDF format.
String oFilePath = (Dts.Variables["DestinationPath"].Value).ToString() + "/" + "enVision_7DayReport_" + (Dts.Variables["ControllerID"].Value).ToString() + "_" + DateTime.Now.ToString("MMddyyyy") + ".pdf";
Dts.Variables["FileName"].Value = oFilePath;
// Name of the report
string _reportName = @"/Reports/Service Report";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
parameters[0] = new RE2005.ParameterValue();
parameters[0].Label = "ControllerID";
parameters[0].Name = "ControllerID";
parameters[0].Value = Dts.Variables["ControllerID"].Value.ToString();
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(oFilePath))
stream.Write(results, 0, results.Length);

What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
(I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
Rachael

Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

I would like to know what is the default timouts for wired/ wireless devices ..and how to reset it on Extreme. Many thanks

I would like to know what is the default timouts for wired/ wireless devices ..and how to reset it on Extreme. Many thanks

Wireless is "always on" with the AirPort Extreme. There are no settings to "time out" wireless on the AirPort Extreme. Those settings would be adjusted on each individual computer.

What is the default time settings in Process chains

Similar Messages

Maybe you are looking for