What is the default user in outlook calendar permissions?

Hi all, what is "default" in the terms of permissions in outlook - please see the screen shot below
I need to give everyone access to my calendar but i do not understand the outlook permissions feature
Any suggestions would be much appreciated
thanks

By giving "Default" permissions in your calendar, you're giving them to everyone on the Exchange server.
For example, if you want everyone to be able to view the details of your appointments, you can give Default access to read "Full Details".
If you also want them to be able to create appointments in your calendar, tick the appropriate check boxes under Write.
Regards, Hans Vogelaar

Similar Messages

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

What is the default user and password on linksys wrt54gr

what is the default username and password on my linksys wrt54gr.. i've tried admin and admin and that does'nt work.. any ideas???

If you have setup the routers bridging into the same LAN (i.e. the LAN-LAN connection and not using the internet port on the second router as I have suggested in the link above) and with the wireless settings you have mentioned you should have a wireless roaming network. Make sure you have SSID broadcast enable on both routers.

What is the default user name and password to connect Guest by Console?

HI
at last I have successfully created Guest!!!!
but trouble never leave!!
i isntall tight vnc in the VOVM
now when i am clicking on Console
its launching java , then its giving me a dialog box
Oracle VM login
username
password
when i was creating Guest, it did not ask for any passoword as it used to ask for OVM 2.2
so what password do i have to type ??
thanks for your help
I am nearly there..

Hi,
RTFM: http://download.oracle.com/docs/cd/E20065_01/doc.30/e18549/vm.htm#BABCCHHF
..."You are prompted to enter the login credentials for Oracle VM Manager."...
Regards
Sebastian

What is the default User Id and Password for Endeca Server Console

Hell All,
I have installed Endeca Server 7.6.0.0.0 in Windows 64-bit. When I try login to http://localhost:7001/endeca-server/console/ it asking Login id and Password to for "sh_sample" datadomin that i imported from SampleApp. I tried using Admin Server user id and it did not work.
Please help.
Thank you

Hi,
It is possible that you are asking about these two issues:
1. SH sample data set is a data set that can be used with the Endeca Server, outside of the context of Studio. In particular, this data set represents an already created index, and thus can be queried by using SOAP UI, or other tool for working with Endeca Server's web services directly. This data set does not include collections (in v.7.6.0.0), and thus cannot be viewed or worked with, in Studio (which, like Integrator, requires having collections, as compared to Endeca Server 7.6.0.0 in which collections are optional at ingest time).
2. The Endeca Server Console that you are trying to use is packaged with the Endeca Server because it is part of the Data Enrichment Module. Data Enrichment Module includes the Console and plugins. You can use the plugins within Studio. The Console, although it is installed with the Endeca Server, is not intented to be used in this release (because the Data Enrichment plugins are available to users through Studio).
To get back to your questions, if you would like to use SH data set, please see the instructions in the Endeca Server Installation Guide. http://docs.oracle.com/cd/E40521_01/server.760/es_install/toc.htm#Using%20the%20SH%20sample%20data
As for the Console, it should not be used. Instead, use Studio's Enrichments. For information, please see: Enriching Data Set Attributes

What is the default user id and password for webanalysis

Hi
I installed webanalysis in my system and i am able to open the login page.
Problem is that if i am giving userid as admin and password as pasword i was unable to log in.
if i am trying to log in using above credentials i am getting the following error message
Your logon attempt failed. Try again.
some times it is
invalid username/password.
Anyone please help me ...its very urgent....
Thanks in advance
Abedeen

Default was always Administrator and password - case sensitive.
Would try the main install id that was used when installing all the software.
Hope this helps
Andy King
http://www.analitica.co.uk

What should the default tablespace be for SAP users

I'm using Oracle 10.2.0.4
For the users
OPS$<SID>ADM
OPS$ORA<SID>
SAP<SID>
what should the default tablespace be
PSAP<SID>USR or PSAP<SID>

Hello Bill,
> For the users
> OPS$<SID>ADM
For this user the default tablespace is SYSTEM
> OPS$ORA<SID>
For this user the default tablespace is SYSTEM
> SAP<SID>
For this user the default tablespace is PSAPPRDUSR
Regards,
Federico Biavati

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

HT1386 What is the procedure to sync Outlook 2011 Contacts, Calendars, Notes, and Tasks to my iPhone4S using OS X Version 10.8.3?

What is the procedure to sync Outlook 2011 Contacts, Calendars, Notes, and Tasks to my iPhone4S using OS X Version 10.8.3?

Ideally your iPhone and Outlook would be setup to use an Exchange account

What is the procedure to sync Outlook 2011 Contacts, Calendars, Notes, and Tasks to my iPhone4S using OS X Version 10.8.3?

What is the procedure to sync Outlook 2011 Contacts, Calendars, Notes, and Tasks to my iPhone4S using OS X Version 10.8.3?

When the phone is connected to the computer in iTunes, go to the Info tab and select Outlook as the source for Contacts and Calendars. Tasks will not sync, but Notes can be selected to sync as well.

What is the default password after creating a user with wwsec_api.add_portal_user ?

Hi,
I created 850 Portal users with the WWSEC_API calls in PORTAL30 and PORTAL30_SSO. I can logon with an account if manually reset the password for a specific user. But what is the default password of a user after creating it with the API calls ? I tried "password" and the username, but that didn't work.

The WWSEC_API should not be used to create the user account in the SSO schema. As you noted the WWSEC_API calls do not set the password - these are intended to be used only for setting up Portal profile information. For creating the user that can log in, use the Login Server APIs - in sso/ssoumgt.pks:
WWSSO_APP_USER_ADMIN.CREATE_USER.

WHAT IS THE DEFAULT PASSWORD FOR GUEST USER

what is the default password for guest user?

There is no default password for a guest user unless you've created one:
(screenshot from the System Pref Guest User Pane)

HT1338 i bought an eMac that has been restored to the factory setting. It runs os 10.4.11. the default user is eMac. What would the default password be?

I bought an eMac tat has been restored to the factory settings. it runs on os 10.4.11.The default user is eMac. what would the factory password be?

There is no default user or password; these are set up with the computer following the installation process. Ask the person who sold you the computer for it.
(75864)

How do I fix meeting requests/invitations default to ms outlook calendar and do not show up on iCloud calendar?

This is frustrating and seems to be a known issue. Regular calendar items work fine but any meeting invitations sent to and accepted on PC running Outlook 2010 with iCloud add in only show up on default (local) calendar. Must add them manually. Also meeting requests sent from same PC configuration are being hijacked by iCal/iCloud feature and prompt the receiver to accept through iCloud interface rather than a regular Outlook email invite, though those meeting do show up on end user's Outlook calendar. And meeting requests sent to a group gives an STMP error. Is there an update or newer version that fixes any of these issues? I turned off MobileMe add in but doesn't help. We use iCloud and like it because we need the calendar and contact features to sync between the PC and iPhone and iPad, which works fine.

Outlook will not allow a subscribed calendar to be the default, unless it is an Exchange calendar. You can't change this behaviour unfortunately.

How do you change the default User in Windows 7 on a non-RAIDed 4 disk setup?

Hi.
I have installed Windows 7 Ultimate 64bit on Darling my new machine, which has a four-disk setup without RAID, like this:
SSD OCZ -OS, Programs (C:)
WD 2002FEAX - Media Projects (D:)
WD 1002FAEX - Pagefile, Media Cache (E:)
WD 1002FAEX - Previews, Exports (F:)
This setup, and because it’s unRAIDed (four separate disks), created the User file in the OS disk, right under the Programs (x86) folder, which at times causes files, which are not programs, to automatically be saved in the User file that's in the Programs disk, when in fact Programs disk is NOT meant for storage.
Further, I cannot save stuff in My Documents because that directory leads the files (that I am saving) to the User folder in the OS disk, forcing me to navigate out of there and into an alternative disk, which is time consuming, more so than if i had a directory leading to D disk.
So, I am wondering, can anyone help me change my directory to establish the default User folder in any folder other than C?
Or, if can someone refer me to Windows 7 tutorials, resourses, that are a tad more than Dummy level.
I have heard that changing around the directory as such can mess with the OS, and though not at Dummy level, I’m quite new to PC and profusely insecure about making changes to Darling at all.
Thanks.

Hi folks.
I would like to update you about what happened regarding my wish to move the User location to another hard disk. Heeding your warning, i did NOT attempt that, but rather, moved the location of the My Documents folder in my Library, from its default place on (SSD) disk C:/ (which is the default location because that's where i installed Windows 7,) to another disk - D:/ called "Media Projects".
Here is how my directory looked before i made the change, my three hard disks were outside the Library directory that's on my SSD (Programs disk):
(I did that by right-clicking the My Documents folder in the left column of a browser window, to access the Location tab.)
What this did is, it put driver D:/ under Documents, which is under Library, see picture, which now enables saving documents quickly, by going from my Library directly to my D drive, however it eliminated the "My Documents" folder/possibility all together from the left-column list of folders in the Windows Explorer browser pane.
I am now trying to do the same with Music, Pictures, and Videos, i.e. to move them to D drive, but am unable to do so because right-clicking those icons in the directory does not produce the Location tab in Properties panel, and nor does right-clicking inside the files themselves.
Similarly, right-clicking Downloads, which i also want to have residing in my D drive, does NOT produce a Location tab in properties pane, though it does seem possible to change the directory manually...see picture.....but am wary....
I am still monitoring my new system, and will see if and how this change effects my system's performance.
Thanks.

What is the default user in outlook calendar permissions?

Similar Messages

Maybe you are looking for