What is the default value of EO_INBOUND_PARALLEL

Hi Gurus,
We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck in queues, I have seen more than one XBTI8 queues.
Please help me with my doubt. thanks!

Hi,
Thanks for the replies.
How about the parameter EO_INBOUND_TO_OUTBOUND and EO_OUTBOUND_PARALLEL?
I assume by default EO_INBOUND_TO_OUTBOUND is set to 1?
Then what is the default value for EO_OUTBOUND_PARALLEL? Plus to set this parameter you need to specify the receiver, in this case, is it true that EO_OUTBOUND_PARALLEL is not set at all so only one outbound queue? this does not make sense. Or maybe by default EO_INBOUND_TO_OUTBOUND is set to 0 so EO_OUTBOUND_PARALLEL is not used at all?
Thanks.

Similar Messages

  • What is the default value of Vector?

    what is the default value of the Vector? now another main thing i have generate one vector with fix size like
    Vector v=new Vector(5);
    now the thing is that suppose i add sixth element at that time it's size will be 10 or will be 15.
    Vector v1=new Vector(15);
    now i add 16 the elment so at that time vector size is 25 or it will be 30??

    ya i get it your point let's i explain which i understand from your side ok
    Vector v=new Vector(10,15)
    so in this case it's size is 10 right when i add 11the element at that time it's size is 25 right?
    Vector v1=new Vector(5);
    in this case the it's size is 5 right and when i add 6th element at that time it's size will be double in short 10 in this case right.
    Vector v2=new Vector();
    in this case the default size is 10 right when i add 11th element at that time it's size is 20 right
    If my understanding is wrong then pl'z explain this thing with examples
    waiting for your reply.

  • What is  the default value of iterator's rangesize in pageDef.xml

    there are two jspx file,one named by browsePage,another editPage.they use the same VO. and i can go into editPage from browsePage by commandButton or commandLink .
    the rangesize of the iterator in browsePage is 10, like this
    <iterator id="SysTabColorView1Iterator" RangeSize="10"
    Binds="SysTabColorView1"
    DataControl="SysManageAppModuleDataControl"/>
    usually in editPage, it like the following
    <iterator id="SysTabColorView1Iterator" RangeSize="10"
    Binds="SysTabColorView1"
    DataControl="SysManageAppModuleDataControl"/>
    now i have a question ,when i dont set the value of RangeSize in editPage, what is the default value of this iterator.
    other business, when i set the value to 1 , it will occur the famous error ,
    JBO-

    Hi,
    if you are browsing to the edit page from the browse page it doesn't matter what the range size is. If you've navigated though the ranges on the browse page then you will be in the correct range set and ranging won't be a problem.
    Brenden

  • What are the default values for "default if unwired"?

    How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
    Is there a listing somewhere of what default values will be?
    Thank you,
    cayenne

    tst wrote:
    Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
    More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Outp​ut-tunnels-from-event-structure-should-default-to-​...
    VERY much agreed!  Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

    I have run across issues that creep up. The timeout setting of
    dom.max_chrome_script_run_time
    seems to be 20 seconds in FF 25.0.1 and 10 seconds in FF 30
    I was wondering if you have release notes for all versions from
    [25, 30] so that I can know all of the different timeout values?
    Thanks,
    -Charlie

    Can you post a screenshot that shows a different default value of one of those prefs?
    Note that it is possible to modify the default value via a mozilla.cfg file in the Firefox program folder.
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • What is the default value of  license_max_users in oracle 9i/10g

    hi,
    may i know the default value of license_max_users in oracle 9i/10g.
    plz reply the solution.
    thanks.

    user10492712 wrote:
    may i know the default value of license_max_users in oracle 9i/10g.Consider (as a typical Oracle professional might do):
    - This sounds very much like an Initialization Parameter.
    - Initialization Parameter defaults, descriptions, usage and warnings are documented in the Oracle Database Reference manual
    - The Reference manual is part of the doc set
    - The doc set is available at http://tahiti.oracle.com
    For your convenience, the information is at http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams093.htm#CHDBJCJC

  • What is the default value of boolean type transient attribute in VO?

    Hi All,.
    jdev version-11.1.2.1.0
    i have created one vo based on eo where i add one boolean type transient attribute Marked(uihint checkbox).
    now i have apply view criteria on this vo.
    like---
         ViewObject vo=getView(iterator);
         vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
         ViewCriteria vc=vo.createViewCriteria();
         ViewCriteriaRow vcr=vc.createViewCriteriaRow();
         vcr.setAttribute("Marked", "true");//Setting attribute on view criteria.
           vcr.setConjunction(ViewCriteriaRow.VCROW_CONJ_AND);
           vc.setCriteriaMode(ViewCriteria.CRITERIA_MODE_CACHE);
         vo.applyViewCriteria(vc);//Apply view criteria on vo.
         vo.executeQuery();
         vc.add(vcr);
       vo.executeQuery();this code running fine and that is selected only those row which i have cheked.
    but now i want to apply view criteria that select select those rows that are not checked.
    like-
    vcr.setAttribute("Marked", "false");but it is not return any row.
    if select checked any row and then uncheked that row so marked attribute for this row set false. but rows that are unchecked by default not return.
    so my question is that what is default value of Marked attribute when user not take any action i will try
    vcr.setAttribute("Marked","null");
    but not working.

    i have tried this but this is not working.
    follwing code working for Null case not for False
    vcr.setAttribute("Marked","is null"); this code display all rows who has null but when i checked any row and then unchecked so that row get value "false" also not display.

  • What's the default values of ulimit?

    Hi, I wan't to check if my ulimit values are normal, and not affected by any other config by mistake. Can I do it somehow? I mean where does ulimit takes it default values? Some answers over internet say its /etc/security/limits.conf, but I do not see there no config info. Here's my ulimit -a if anyone can say there's smth wrong will be appreciated:
    Maximum size of core files created (kB, -c) 0
    Maximum size of a process’s data segment (kB, -d) unlimited
    Maximum size of files created by the shell (kB, -f) unlimited
    Maximum size that may be locked into memory (kB, -l) unlimited
    Maximum resident set size (kB, -m) unlimited
    Maximum number of open file descriptors (-n) 1024
    Maximum stack size (kB, -s) 8192
    Maximum amount of cpu time in seconds (seconds, -t) unlimited
    Maximum number of processes available to a single user (-u) 31677
    Maximum amount of virtual memory available to the shell (kB, -v) unlimited

    /etc/security/limits.conf comes with the "pam" package, so you should have one, even if everything in it is commented out. I don't think defaults are defined anywhere, but I assume that the ones you posted are the defaults for your system if you didn't override them. Those values seem reasonable. Note that setting core files to zero disables core dumps (usually a good thing), and you might want to increase your number of open file descriptors, perhaps to 10,000 or so for your own user. Also note that even the fields set to "unlimited" are still restricted by the global limits, usually set using sysctl(8), and of course your hardware in some cases. Unless you run into problems (usually processes being sent SIGKILL, unable to open files, unable to allocate memory, etc), then those values should be fine. You may lower them as you see fit to prevent users from hogging resources too, if necessary.

  • What is the default value length for attribute?

    I have found that there is no limit for the value length about the attribute directorystring.
    Is it right?
    Another question is:
    I created an attribute with the "multi-valued".
    How many values can i add into the same entry?
    Thank u very much.

    Correct. By default, there is no limit for the value length. However, it is possible to limit the max length for a given attribute type by specifying the max length in curly bracket in the schema definition e.g.
    attributetype ( 2.5.4.41 NAME 'name'
    EQUALITY caseIgnoreMatch
    SUBSTR caseIgnoreSubstringsMatch
    SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{32768} )
    The value {32768} indicates the maximum length of the string and is optional.
    There is no limit in the number of attribute value too (as long as you have enough memory and disk to process it) . However, keep in mind that most directory servers limit the length of the LDAP PDUs, so you might have to change these settings if you want to create or search for very big entries.

  • What is the default value whe data type is numaric

    dear
    can you tell me the defult value of the coloum when we set it to numaric
    i want to pull the data from the table using blank or default valu in that colum
    i had done the following qry
    SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL]  T0 INNER JOIN  [dbo].[@SPLPLAN]  T1 ON T0.Code=T1.U_BasCode INNER JOIN  [dbo].[@SPLPANRF]  T2 ON T1.Code = T2.Code
    WHERE T0.[U_ItemCode]='CON00001' AND
    T2.[U_QtyTo]='' *
    here i want to set the valu like = 0 or ''
    thanks in advance

    Hi Kishor,
    Try This....
    SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL]  T0 INNER JOIN  [dbo].[@SPLPLAN]  T1 ON T0.Code=T1.U_BasCode INNER JOIN  [dbo].[@SPLPANRF]  T2 ON T1.Code = T2.Code
    WHERE T0.[U_ItemCode]='CON00001' AND
    T2.[U_QtyTo]=0
    or
    SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL]  T0 INNER JOIN  [dbo].[@SPLPLAN]  T1 ON T0.Code=T1.U_BasCode INNER JOIN  [dbo].[@SPLPANRF]  T2 ON T1.Code = T2.Code
    WHERE T0.[U_ItemCode]='CON00001' AND
    T2.[U_QtyTo]=Null
    Thanks
    Shafi
    Edited by: shafi_sunshine on Aug 23, 2011 1:44 PM

  • WHAT is the default value of jdbc attributeMap?

    In deployment descriptor txt file
    (attributeMap
    ; Maps the EJBean attributes to database column names
    ; EJBean attribute Database column name
    If I do not do the mapping here, should WebLogic use the container
    managed field name as the database column names by default? At least in
    4.0.3 that is NOT the case!

    There is no default attribute map. If you do not have them set, all sorts
    of bad things will occur (most importantly, none of your finders will work,
    and in 4.5.x they will not deploy).
    K
    "J. Jason Zhou" wrote:
    In deployment descriptor txt file
    (attributeMap
    ; Maps the EJBean attributes to database column names
    ; EJBean attribute Database column name
    If I do not do the mapping here, should WebLogic use the container
    managed field name as the database column names by default? At least in
    4.0.3 that is NOT the case!--
    Please note that my opinions are my own, and do not in any way
    represent BEA WebXpress, or its parent company, BEA Systems.
    Kirk Wylie | [email protected]
    Software Engineer | +1 415 364 4539
    BEA WebXpress, nee WebLogic | http://weblogic.beasys.com

  • What is the default log filename for connector logging in Weblogic 9.x?

    According to the JCA 1.5 Specification -
    The ApplicationServer manages the association of output stream with the ManagedConnectionFactory.
    http://java.sun.com/javaee/5/docs/api/javax/resource/spi/ManagedConnectionFactory.html#setLogWriter(java.io.PrintWriter)
    So setLogWriter() is called by WebLogic 9.x for the ManagedConnectionFactory.
    My observation is that even if no <log-filename> is specified in weblogic-ra.xml of the resource adaptor , the value of the PrintWriter set on the ManagedConnectionFactory is not null
    eg java.io.PrintWriter@404c51.
    So my question is that in case no <log-filename> entry is specified in weblogic-ra.xml of the resource adaptor , what is the default value of the logfile to which the connector logging messages will be redirected?

    your home folder should have the permissions set as you state them.
    Everything inside your home folder (like Music, Documents and others) should be more like
    you: read&write
    staff: no rights
    everyone: no rights
    but if you are the only user of your Mac, these settings have little importance to you.
    to repair the permission boot into recovery (pressing command + R before you hear the start up sound. Then start Disk Utility from the Utility menu and choose Repair permissions. See this article for a detailed set of instructions. It's a little older, but still valid-

  • Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?

    Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?. I need the actual default value for a particualr preference.
    About:config does show some default values but I need the source from which about:config picks up the default value.
    Any help in this direction is greatly appreciated.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    The prefs that aren't hidden if they are the default are stored in two JavaScript text files in the Firefox program folder
    You can open them via these links in a Firefox tab:
    <code>resource:///defaults/pref/firefox.js
    resource:///greprefs/all.js
    </code>
    ([/forum/1/702598])

  • What is the default timeout value for the SPQuery object?

    What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
    Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

    Hi,
    Do you want to avoid timeout when you query list items?
    If so, we can use the following C# code to set timeout.
    HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
    More information is here:
    http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
    The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

Maybe you are looking for