What is the diff between final cut express and pro

Mac OS X (10.4.8)

They are basically the same programs with a few features (that only pros usually require) missing from FCE.
All the Video Effects and Transitions are the same.
The main differences are concerned with esoteric features like being able to capture video other than DV - things which will not affect most amateurs or even some professionals.
Ian.

Similar Messages

What's the deal with Final Cut Express HD and me?

A few months ago, I encountered a lot of problems when I was trying to capture some HD video using Final Cut Express H.D. I've set my camera (a JVC GR-HD1U) to the MPEG2 setting, and I changed the set up in Final Cut to Apple Intermediate Codec 1080i60. The good news is that I was able to capture for about 15 seconds. Then the capture stops, and a message comes up telling me that I have reached the end of the tape. Only I haven't.
So.....what's the deal here?
Is there something that I am overlooking, or doing wrong? Or is it just not meant to be for me to capture HD Video?
If someone could let me know, I would appreciate it.
Thanks everyone.

Am I right in thinking this camera isn't compatible/on the supported list? Does it work with iMovie? Perhaps you could capture there and import into FCE?
I see in your earlier post Manson Root had captured from this camera successfully. Perhaps they will reply again.

File Compatibility between Final Cut Express and iMovie '09

I am in the process of converting some old VHS tapes to DVD so I can import and edit them in Final Cut Express or iMovie '09 (I'm upgrading from iMovie '08). I would like to transfer them to a file format that I can use in either application.
Are the file formats the same in both applications or is there one in particular that I should use? I know that it is possible to open a video move created in iMovie '09 in Final Cut Express, but there some situations where I want to go in the other direction. i.e. Import the raw file that was created to be imported by Final Cut Express by iMovie '09 instead.
Bob

It would be better if you did not get them transfered to DVD. This is a highly compressed format. If you can get the material transfered directly to QuickTime using the DV NTSC codec you would be better off.
The file formats in iMovie and FCE are not the same. iMovie uses DV Stream. FCE uses QuickTime.

Moving project between Final Cut Express and Final Cut Pro back and forth

We are buying new Macs to our studio. One will be main editing suite with Final Cut Studio 2.
Another Mac mini will have Final Cut Express.
I do understand that you cannot open your FCE project in FCS, but can you do it the other way around, using the Mac Mini as "offline suite"?

OK, so far, soo good. But can I open a FCP project in FCE?
(Scenario: I start working in FCE, continue in FCP and return to FCE).
I understand if some effects, etc won't show up in FCE.

What is the diff between ITS ESS/MSS and Webdynpro ESS/MSS

Hi all,
Could anybody tell me the differences between ITS ESS/MSS and Webdynpro ESS/MSS?
Presently we have ITS based ESS/MSS in our landscape and customer wants to go for Webdynpro ESS/MSS. and Webdynpro ESS/MSS is already installed in the sandbox system where ITS based ESS/MSS is already there.
my doubt is can we install both ESS/MSS in the same server? if it is installed we may get any problems?

Karunakar,
check the compatibility of frontend and backend levels
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
try to restart the portal and check
Thanks
Bala Duvvuri

What is the diff between SAP Netweaver B1i and B1i that comes with SBO 2007

Hi
There is SAP Netweaver B1i which is used for integration with SAP R3. But when you get SBO 2007 it also comes with B1i. Is there a difference or is it the same tool??
Thank you for your time.

Louis,
B1i on the SAP Business One 2007A Preview release is the same as B1i 2005A as far as what it is and how it works with relation to integrating SAP Business One and R/3. There are new features that are part of B1i 2007A of course that are not in 2005A such as integration with SAP BW, an updated Control Center as well as some other features such as the installation and upgrade routines. You should have a look at the documentation in the ..\Documentation folder and specifically in the "Integration" and "PEP" folders on the preview media. This is also, as mentioned, the PREVIEW version, so there will be updates to it forth coming before general release.
HTH,
Eddy

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why?

Are there bugs between final cut express 2, and imovie?

i dont have the HD version of final cut express, just the original version. i imported some footage and exported as a H.264 high quality video, then put that to idvd...the final burned version looked like soo bad, it was like the horizonal lines of the video were blurred and studdering. i don't know. so i exported a full quality video and took it to imovie HD6 to do the H.264 compression, then took that to idvd and did a "best quality" burn and then the final output on the tv....looked like some frames were being skipped.....what the heck? Is this just a bug between final cut express 2.0 and idvd? maybe i should try capturing in imovie and sending that to idvd.....BUT I ALREADY EDITED IT! AHHHHHH

well i'm trying to save space on my HD, so i export to a H.264 file to keep on my drive, and when i need to make dvd's, i just compress the H.264 file, and it still looks awesome on a tv......it has worked a while ago, but all of a sudden it's giving me issues. i've tried every way
RAW to H.264 to imovie to idvd best quality to dvd....BAD
RAW to RAW to imovie to idvd best performance to dvd...BAD
RAW to H.264 to idvd best quality to dvd...BAD
RAW to imovie to H.264 to imovie to idvd to dvd...BAD
i just dont get it

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

I have been creating a film on Final Cut Express and half of my film has disappeared- what can I do to retrieve it back!?

I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!

Check the capture/scratch disc to make sure the media is still there. If it isn't your hard drive may be going bad. If it is, then you may have inadvertently cut part of the video from the Timeline or deleted it from the Browser.
As for the Command z issue, see how many levels of undo you have set in FCE preferences. Also keep in mind that Command z will not work if you close the project and reopen it.
-DH

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop it's an mpg.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop and it's an mpg file. Please help me

Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC). In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60). Create a new sequence, then import the converted file.
Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip.
What was the source of the MPG file? How about if you open it in QuickTime, then do Window > Show Movie Inspector. Tell us what it says for codec/compression, frame size & frame rate.

Hi guru's what is the diff between for all entries & joins

hi guru's what is the diff between for all entries & joins

Hi Vasu,
Joins are used to fetch data fast from Database tables:
Tables are joined with the proper key fields to fetch the data properly.
If there are no proper key fields between tables don't use Joins;
Important thing is that don't USE JOINS FOR CLUSTER tableslike BSEG and KONV.
Only use for Transparenmt tables.
You can also use joins for the database VIews to fetch the data.
JOINS
... FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Inner Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.
Note
In order to determine the result of a SELECT command where the FROM clause contains a join, the database system first creates a temporary table containing the lines that meet the ON condition. The WHERE condition is then applied to the temporary table. It does not matter in an inner join whether the condition is in the ON or WHEREclause. The following example returns the same solution as the previous one.
Example
Output of a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID
WHERE FCONNID = PCONNID
AND P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
Note
Since not all of the database systems supported by SAP use the standard syntax for ON conditions, the syntax has been restricted. It only allows those joins that produce the same results on all of the supported database systems:
Only a table or view may appear to the right of the JOIN operator, not another join expression.
Only AND is possible in the ON condition as a logical operator.
Each comparison in the ON condition must contain a field from the right-hand table.
If an outer join occurs in the FROM clause, all the ON conditions must contain at least one "real" JOIN condition (a condition that contains a field from tabref1 amd a field from tabref2.
Note
In some cases, '*' may be specified in the SELECT clause, and an internal table or work area is entered into the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the FROM clause, according to the structure of each table work area. There can then be gaps between table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, not simply by counting the total number of fields. For an example, see below:
Variant 3
... FROM tabref1 LEFT [OUTER] JOIN tabref2 ON cond
Effect
Selects the data from the transparent database tables and/or views specified in tabref1 and tabref2. tabref1 und tabref2 both have either the same form as in variant 1 or are themselves join expressions. The keyword OUTER can be omitted. The database tables or views specified in tabref1 and tabref2 must be recognized by the ABAP-Dictionary.
In order to determine the result of a SELECT command where the FROM clause contains a left outer join, the database system creates a temporary table containing the lines that meet the ON condition. The remaining fields from the left-hand table (tabref1) are then added to this table, and their corresponding fields from the right-hand table are filled with ZERO values. The system then applies the WHERE condition to the table.
Left outer join between table 1 and table 2 where column D in both tables set the join condition:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Left Outer Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a3
b3
c3
2
NULL
NULL
NULL
NULL
NULL
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all custimers with their bookings for October 15th, 2001:
DATA: CUSTOMER TYPE SCUSTOM,
BOOKING TYPE SBOOK.
SELECT SCUSTOMNAME SCUSTOMPOSTCODE SCUSTOM~CITY
SBOOKFLDATE SBOOKCARRID SBOOKCONNID SBOOKBOOKID
INTO (CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID)
FROM SCUSTOM LEFT OUTER JOIN SBOOK
ON SCUSTOMID = SBOOKCUSTOMID AND
SBOOK~FLDATE = '20011015'
ORDER BY SCUSTOMNAME SBOOKFLDATE.
WRITE: / CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or using an alias.
Note
For the resulting set of a SELECT command with a left outer join in the FROM clause, it is generally of crucial importance whether a logical condition is in the ON or WHERE condition. Since not all of the database systems supported by SAP themselves support the standard syntax and semantics of the left outer join, the syntax has been restricted to those cases that return the same solution in all database systems:
Only a table or view may come after the JOIN operator, not another join statement.
The only logical operator allowed in the ON condition is AND.
Each comparison in the ON condition must contain a field from the right-hand table.
Comparisons in the WHERE condition must not contain a field from the right-hand table.
The ON condition must contain at least one "real" JOIN condition (a condition in which a field from tabref1 as well as from tabref2 occurs).
Note
In some cases, '*' may be specivied as the field list in the SELECT clause, and an internal table or work area is entered in the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the llen in der FROM clause, according to the structure of each table work area. There can be gaps between the table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, as in the following example (not simply by counting the total number of fields).
Example
Example of a JOIN with more than two tables: Select all flights from Frankfurt to New York between September 10th and 20th, 2001 where there are available places, and display the name of the airline.
DATA: BEGIN OF WA,
FLIGHT TYPE SFLIGHT,
PFLI TYPE SPFLI,
CARR TYPE SCARR,
END OF WA.
SELECT * INTO WA
FROM ( SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID )
INNER JOIN SCARR AS C
ON FCARRID = CCARRID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / WA-CARR-CARRNAME, WA-FLIGHT-FLDATE, WA-FLIGHT-CARRID,
WA-FLIGHT-CONNID.
ENDSELECT.
And for all entries,
this will help u.
use of FOR ALL ENTRIES:
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
cheers,
Hema.

What camcorder works best with Final Cut Express?

What camcorder works best with Final Cut Express?

Anything that's DV, HDV, or AVCHD and shhots in a format supported by the application.

What is the cost for Final Cut Pro if I don't have a previous version to update?

What is the cost for Final Cut Pro if I don't have a previous version to update? I see the $299 price for updates.
What is the brand new purchase price?

Thanks so much. Yes I was thinking on the lines of PwnySlaystation's response.
I appreciate the help.
Will this new version run on OS 10.6.8?
Thanks for the help.

Hi this pandu can i know what is the diff between pnp &pnpce ldb

hi,
this pandu can i know what is the diff between pnp &pnpce logical database.
thanks and regards,
pandu.

pretty much the same.. except that PNPCE has additional functionality to deal with Concurrent Employment.. PL go through <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm">SAP Help</a> for more info.
~Suresh

What is the diff between final cut express and pro

Similar Messages

Maybe you are looking for