What is the diff between ITS ESS/MSS and Webdynpro ESS/MSS

Hi all,
Could anybody tell me the differences between ITS ESS/MSS and Webdynpro ESS/MSS?
Presently we have ITS based ESS/MSS in our landscape and customer wants to go for Webdynpro ESS/MSS. and Webdynpro ESS/MSS is already installed in the sandbox system where ITS based ESS/MSS is already there.
my doubt is can we install both ESS/MSS in the same server? if it is installed we may get any problems?

Karunakar,
check the compatibility of frontend and backend levels
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
try to restart the portal and check
Thanks
Bala Duvvuri

Similar Messages

What is the diff between SAP Netweaver B1i and B1i that comes with SBO 2007

Hi
There is SAP Netweaver B1i which is used for integration with SAP R3. But when you get SBO 2007 it also comes with B1i. Is there a difference or is it the same tool??
Thank you for your time.

Louis,
B1i on the SAP Business One 2007A Preview release is the same as B1i 2005A as far as what it is and how it works with relation to integrating SAP Business One and R/3. There are new features that are part of B1i 2007A of course that are not in 2005A such as integration with SAP BW, an updated Control Center as well as some other features such as the installation and upgrade routines. You should have a look at the documentation in the ..\Documentation folder and specifically in the "Integration" and "PEP" folders on the preview media. This is also, as mentioned, the PREVIEW version, so there will be updates to it forth coming before general release.
HTH,
Eddy

What is the diff between final cut express and pro

Mac OS X (10.4.8)

They are basically the same programs with a few features (that only pros usually require) missing from FCE.
All the Video Effects and Transitions are the same.
The main differences are concerned with esoteric features like being able to capture video other than DV - things which will not affect most amateurs or even some professionals.
Ian.

Hi gurus what is the diff between free & refresh

hi gurus what is the diff between free & refresh

Hii!
FREE f.
Effect
FREE f has the same effect as CLEAR f , namely that a Data object f is reset to the initial value corresponding to its type.
Unlike CLEAR, FREE also releases any resources taken up by the data object f. FREE can also release more resources than CLEAR for table work areas declared using the TABLES statement.
After FREE f, the data object f can be re-addressed at any time. The only condition is that you may need to re-allocate resources to the object.
Note
If f is an internal table with header line (where the name f in a sense has two meanings) the statement FREE f refers to the body of the table, and the statement CLEAR f refers to the header line.
REFRESH itab.
Effect
The internal table itab is reset to its initial state, i.e. all table entries are deleted.
Der Return Code SY-SUBRC is undefined.
Notes
The header entry of a table with a header line remains unchanged. It can be reset to its initial value using CLEAR.
FREE itab can be used to free up the memory allocated to the table.
Note
Performance:
The runtime required to reset an internal table depends on the amount of memory previously occupied by that table.
Resetting a small internal table takes around 15 msn (standard microseconds). Resetting a 200 KB table takes around 400 msn, and a 1 MB table, around 3000 msn.
If the internal table has an index or a hash table (because it was edited using INSERT, DELETE, SORT or COLLECT), the runtime increases slightly, since the index or hash table has to be released as well as the table itself.
Regards
Abhijeet

Hi this pandu can i know what is the diff between pnp &pnpce ldb

hi,
this pandu can i know what is the diff between pnp &pnpce logical database.
thanks and regards,
pandu.

pretty much the same.. except that PNPCE has additional functionality to deal with Concurrent Employment.. PL go through <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm">SAP Help</a> for more info.
~Suresh

What is the diff between general gl a/c, control a/c, reconciliation a/c,

Dear All
what is the diff between general gl a/c, control a/c, reconciliation a/c & offsetting a/c.

Hi,
Normal GL Account is the account where the accounting entries are posted. GL Accounts will be broadly of two categories like Balance Sheet Accounts (Assets & Liabilities) and Profit & Loss Accounts (Income and Expenses).
Reconciliation Accounts are used where a subsidiary ledger is maintained. For example for Customers and Vendors details are maintained in separate ledgers but the control totals are posted in the Reconciliation Account which is part of GL Accounts. Similarly reconciliation accounts are maintained for Assets and Materials also. Further, in case of Customer and Vendor accounts the number of line items will be very high, hence only the totals are updated in GL and line items will be individual ledgers. Basically reconciliation account and control account are similar.
Offsetting Account: In Financial Accounting for every debit there should be a corresponding credit. So when ever any entry posted it will normally hit two GL Accounts. When we look at one line item, we will be interested where the other side of the entry is posted. This entry is the offsetting entry.
If you find this usel, please assign points.
Thanks
Murali.

What is the Diff Between tcodes WE19 in XI and WE19 in r/3 sys

Hi all,
Can anyone tell me
What is the Diff Between tcodes WE19 in XI and WE19 in r/3 sys?
one more question I have a File>XI->IDOC scenario
the file is picked up from the sender sys
but not posted the IDOC to the receiver sys
I need to post that particular record to r/3 sys can any tell me how to post the record.
Thanks
Sai.

SAP PI alo have ABAP stack part of PI server, so we will have all trasaction codes in PI too(ECC trasaction codes),the use of WE 19 in ECC to reprocess IDoc to external partner system.
WE 19 tx in PI also same purpose if you are using PI ABAP stack for creating and processing IDoc's,but we never use it.
You hav to build mapping logic to suppress unwated data and create IDoc in ECC.
Regards,
Raj

Hi guru's what is the diff between for all entries & joins

hi guru's what is the diff between for all entries & joins

Hi Vasu,
Joins are used to fetch data fast from Database tables:
Tables are joined with the proper key fields to fetch the data properly.
If there are no proper key fields between tables don't use Joins;
Important thing is that don't USE JOINS FOR CLUSTER tableslike BSEG and KONV.
Only use for Transparenmt tables.
You can also use joins for the database VIews to fetch the data.
JOINS
... FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Inner Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.
Note
In order to determine the result of a SELECT command where the FROM clause contains a join, the database system first creates a temporary table containing the lines that meet the ON condition. The WHERE condition is then applied to the temporary table. It does not matter in an inner join whether the condition is in the ON or WHEREclause. The following example returns the same solution as the previous one.
Example
Output of a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID
WHERE FCONNID = PCONNID
AND P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
Note
Since not all of the database systems supported by SAP use the standard syntax for ON conditions, the syntax has been restricted. It only allows those joins that produce the same results on all of the supported database systems:
Only a table or view may appear to the right of the JOIN operator, not another join expression.
Only AND is possible in the ON condition as a logical operator.
Each comparison in the ON condition must contain a field from the right-hand table.
If an outer join occurs in the FROM clause, all the ON conditions must contain at least one "real" JOIN condition (a condition that contains a field from tabref1 amd a field from tabref2.
Note
In some cases, '*' may be specified in the SELECT clause, and an internal table or work area is entered into the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the FROM clause, according to the structure of each table work area. There can then be gaps between table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, not simply by counting the total number of fields. For an example, see below:
Variant 3
... FROM tabref1 LEFT [OUTER] JOIN tabref2 ON cond
Effect
Selects the data from the transparent database tables and/or views specified in tabref1 and tabref2. tabref1 und tabref2 both have either the same form as in variant 1 or are themselves join expressions. The keyword OUTER can be omitted. The database tables or views specified in tabref1 and tabref2 must be recognized by the ABAP-Dictionary.
In order to determine the result of a SELECT command where the FROM clause contains a left outer join, the database system creates a temporary table containing the lines that meet the ON condition. The remaining fields from the left-hand table (tabref1) are then added to this table, and their corresponding fields from the right-hand table are filled with ZERO values. The system then applies the WHERE condition to the table.
Left outer join between table 1 and table 2 where column D in both tables set the join condition:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Left Outer Join
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
1
e1
f1
g1
h1
a3
b3
c3
2
NULL
NULL
NULL
NULL
NULL
a4
b4
c4
3
3
e2
f2
g2
h2
|--||||||||--|
Example
Output a list of all custimers with their bookings for October 15th, 2001:
DATA: CUSTOMER TYPE SCUSTOM,
BOOKING TYPE SBOOK.
SELECT SCUSTOMNAME SCUSTOMPOSTCODE SCUSTOM~CITY
SBOOKFLDATE SBOOKCARRID SBOOKCONNID SBOOKBOOKID
INTO (CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID)
FROM SCUSTOM LEFT OUTER JOIN SBOOK
ON SCUSTOMID = SBOOKCUSTOMID AND
SBOOK~FLDATE = '20011015'
ORDER BY SCUSTOMNAME SBOOKFLDATE.
WRITE: / CUSTOMER-NAME, CUSTOMER-POSTCODE, CUSTOMER-CITY,
BOOKING-FLDATE, BOOKING-CARRID, BOOKING-CONNID,
BOOKING-BOOKID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or using an alias.
Note
For the resulting set of a SELECT command with a left outer join in the FROM clause, it is generally of crucial importance whether a logical condition is in the ON or WHERE condition. Since not all of the database systems supported by SAP themselves support the standard syntax and semantics of the left outer join, the syntax has been restricted to those cases that return the same solution in all database systems:
Only a table or view may come after the JOIN operator, not another join statement.
The only logical operator allowed in the ON condition is AND.
Each comparison in the ON condition must contain a field from the right-hand table.
Comparisons in the WHERE condition must not contain a field from the right-hand table.
The ON condition must contain at least one "real" JOIN condition (a condition in which a field from tabref1 as well as from tabref2 occurs).
Note
In some cases, '*' may be specivied as the field list in the SELECT clause, and an internal table or work area is entered in the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the llen in der FROM clause, according to the structure of each table work area. There can be gaps between the table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, as in the following example (not simply by counting the total number of fields).
Example
Example of a JOIN with more than two tables: Select all flights from Frankfurt to New York between September 10th and 20th, 2001 where there are available places, and display the name of the airline.
DATA: BEGIN OF WA,
FLIGHT TYPE SFLIGHT,
PFLI TYPE SPFLI,
CARR TYPE SCARR,
END OF WA.
SELECT * INTO WA
FROM ( SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID )
INNER JOIN SCARR AS C
ON FCARRID = CCARRID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / WA-CARR-CARRNAME, WA-FLIGHT-FLDATE, WA-FLIGHT-CARRID,
WA-FLIGHT-CONNID.
ENDSELECT.
And for all entries,
this will help u.
use of FOR ALL ENTRIES:
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
cheers,
Hema.

What is the diff between additive,update ,delete,reverse images

what is the diff between additive,update ,delete,reverse images with an examples.

Hi,
You can read about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/84/81eb588fc211d4b2c90050da4c74dc/content.htm
Hope this helps...

What is the diff in term of fastness and performance between retina and last mbp version in percentage ?

What is the diff in term of fastness and performance between retina and last mbp version in PERCENTAGE ?
Ty to not give links i want an answer here and now by someone who knows what hes talking about.

But old mbp is not available with ssd you have to buy the option right ?
Anyway, outside reboot speed is there a speed difference between retina and old version in term of general processing ?
I have a 2009 MBP that originally came with a SATA drive. Recently, I swapped drives; now, it has 512GB SSD. In other words, you can easily increase the speed of a standard MBP. There is going to be an increase in general processing with the Retina MBPs, but the significance depends on the application. For example, booting Photoshop used to take just over 30 seconds with a SATA drive; with an SSD, it's just under 10 seconds. But controlling for the SATA vs SSD, the differences are smaller and incremental.
Ok you speak about a diff with the retina in term of better graphics when zooming but will this advantage be relevant also on my external giant monitors ?
I can't answer that, so I'll leave that to someone with more expertise in this area.

What is the diffrence between My Runnable Interface and Java Runnable

Hi folks
all we know that interfaces in java just a decleration for methods and variables.
so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
so what is the diffrence between My Runnable Interface and Java Runnable?
thnx

Hi folks
all we know that interfaces in java just a decleration
for methods and variables.
so my Question is why when i create an interface its
name is "Runnable" and i declared a method called
"run" inside it.then when i implements this interface
with any class don't do the thread operation but when
i implement the java.lang.Runnable the thread is going
fine.
so what is the diffrence between My Runnable Interface
and Java Runnable?
thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

What is the difference between version 4.7EE and ECC 5.0

DEAR EXPERTS
what is the difference between version 4.7EE and ECC 5.0?WHAT ARE THE ADDITIONAL FUNCTIONALTIES IN
ECC 5.0?

hi,
Diff between 4.7 and ECC 5.0:
1. 4.7 is on R/3 platform, while ECC 5.0 is on mySAP ERP 2004
2. ECC 5.0 is having ESA(enterprise Serviceoriented Architecture)
3.ECC 5.0 is web enabled with Netweaver technology.
mySAP ERP is the "newer" ERP with numbering conventions like ECC (which stands for ERP Central Component) 5 or 6
mySAP (aka mySAP.com) Business Suite contains Solutions like CRM, SCM etc. The important thing to note here is that this contains mySAP ERP, the one above
mySAP All-in-One Solution is designed for smaller companies (the ad that says SAP is not just for large companies but for great companies where the above mentioned functionality is scaled down and is made to run on one database on a PC type of setup as opposed to the full blown architectures on which SAP traditionally set to run

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?*

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?

When you save to the folder with the little house icon, the file is placed at
/Users/your_user_name/
You would really have to go out of my way to save at:
(the shortcut for the Boot Drive, regardless of its name).
I am not sure how you decided that Time Machine is not saving your files. The default is for Time Machine to do incremental Backups of everything on all attached drives, except for certain temporary information in Cache files. If you have four Users, Time Machine will back them all up.
Looking at the raw Time Machine backups will tell you very little, because it does lots of its work with Hard Links, and because it does incremental backups, so only files that changed since the last Backup are saved at thet cycle. The way to determine whether Time Machine is saving things is to display the window you care about in the Finder, then invoke the "Star wars"/ "Back, back, back in time" Interface.

What is the difference between SAP HR module and SAP-ABAP-HR?

what is the difference between SAP HR module and SAP-ABAP-HR?
Thanks in advance..:)

Hi,
SAP-HR is software component like SAP-BASIS is a component.
Its part of the CORE.
As far as I know there is nothing like SAP-ABAP-HR.
But ABAP offers some special syntax for HR though.
Like INFOTYPES, PROVIDE ENDPROVDIE etc.
Regards,
Sesh

In TCA, what is the difference between Item instance owner and System's own

Hi,
In TCA, what is the difference between Item instance owner and System's owner ?
thanks
siva

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

What is the diff between ITS ESS/MSS and Webdynpro ESS/MSS

Similar Messages

Maybe you are looking for