What is the difference b/t the macbook a1432 and a1181, i think i ordered the wrong case?

what is the difference b/t the macbook a1432 and a1181, i think i ordered the wrong case?

A1181 is any of the seventeen models of the white or black MacBooks with the removable battery.
A1278 is the one model of the Aluminum Unibody
A1342 are the two models of the White Unibody
There's no model A1432.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.

Similar Messages

What is the difference in price of MacBook Pro 13-inch: 2.9GHz750GB and 256GB solid-state drive

What is the difference in price of MacBook Pro 13-inch: 2.9GHz750GB and 256GB solid-state drive ?

go to the Store and configure all the models with upgrades but... an SSD will be fast and responsive, no noise or heat and adds $200 probably to the cost
macbook series forum though, are here (not here)
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

What is the difference between closing your macbook & pressing apple-sleep?

What is the difference between closing your macbook & pressing apple-sleep? My friend aid that it is better to put your computer to sleep by pressing the apple then hitting sleep. I have been just closing it. Is there a difference? Also, is it better to shut your computer down every once and a while. It seems like it gets slow if I just have it sleep after a couple weeks. ALSO, after it has been on sleep every night for a while, my computer has trrouble turning off. I get the problem that says, the application finder has failed to quit try force quitting and try again

None.
There's no particular need to shut down the computer except when traveling or moving the computer.
Whatever other problems you've described have nothing to do with sleeping or shutdown. More likely you need to do some maintenance and/or check that you haven't installed incompatible third-party software.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

What is the difference between "Sort By", "Arrange By", and "Clean Up By"?

What is the difference between "Sort By", "Arrange By", and "Clean Up By"? They are different from SL.

A MAC address is a unique identification consisting of letters and numbers in a form that looks like this:
xx:xx:xx:xx:xx:xx
Every network device has a MAC address, which can be found on a label on the bottom or back of the device. Apple calls this the Ethernet ID.
A DHCP Client ID is an optional name that you can assign to a device. For example, on your Mac....
Open System Preferences (gear icon on the dock)
Open Network
Click on Ethernet
Click Advanced at the lower right
You may be able to edit the DHCP Client ID here....for example.....you could enter MJ500's MacBook in the space provided. That would be the Client ID of your Mac.

What is the difference between On My Mac calendar and icloud calendar?

What is the difference between On My Mac calendars and icloud calendar. I would like just one system to be on both my iphone and MacBook.

Hi,
On My Mac calendars are local to the machine. iCaloud calendars are synced to Apple's iCloud servers.
Best wishes
John M

What's the difference between a not-initialed object and a null object

hi guys, i wanna know the difference between a not-initialed object and a null object.
for eg.
Car c1;
Car c2 = null;after the 2 lines , 2 Car obj-referance have been created, but no Car obj.
1.so c2 is not refering to any object, so where do we put the null?in the heap?
2.as no c2 is not refering to any object, what's the difference between c2 and c1?
3.and where we store the difference-information?in the heap?

For local variables you can't have "Car c1;" the compiler will complain.That's not true. It will only complain if you try to use it without initializing it.
You can have (never used, so compiler doesn't care):
public void doSomething()
   Car c1;
   System.out.println("Hello");
}or you can have (definitely initialized, so doesn't have to be initialized where declared):
public void doSomething(boolean goldClubMember)
   Car c1;
   if (goldClubMember)
       c1 = new Car("Lexus");
   else
       c1 = new Car("Kia");
   System.out.println("You can rent a " + c1.getMake());
}

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between component(Y, Pb, Pr) and component(R,G,B)?

[I previously posted this question in another thread as hadn't realised how to post new question]
Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
Here’s what I think I know:-
The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
Hopefully someone can help educate me on this !

Thanks for this.
My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
Thanks.

What is the difference between Safari 5.1.7 and 5.1.10? I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)

Might be the security fixes > Safari 5.1.10 for Snow Leopard

What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?

Hi,all!
What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
Why there have two JRE? Which one we should use?

JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com

What is the difference between 11.1.0.1 And 11.1.0.1.1

What is the difference between 11.1.0.1 And 11.1.0.1.1

11.1.0.1 is the base version of Oracle installed on the system.
11.1.0.1.1 is the version of PSU (patch set update) applied to the base release version.
Take a look at this http://docs.oracle.com/cd/B28359_01/server.111/b28310/dba004.htm

What is the difference between APPLE TV models 30850MD199LLA and 300024854433?

What is the difference between APPLE TV models 30850MD199LLA and 300024854433?

MD199 is as shown below. The other number is not an Apple model number.
OVERVIEW
Introduced     March 2012 (A1427) March 2013 (A1469)
Discontinued     --
Model Identifier     AppleTV3,1 (A1427) or AppleTV3,2 (A1469)
Model Number     A1427 or A1469
EMC     2528
Order Number     MD199LL/A

What is the difference between apple care protection plan and apple care

What is the difference between apple care protection plan and apple care +

apple care protection plan
That is the extended warranty (total of 3 years including the standard warranty for the first year) for any Mac computer.
apple care +
That is the extended warranty (total of 2 years including the standard warranty for the first year) for any iDevice (iPad, iPhone, etc).
For either, the standard warranty is usually referred to as hardware warranty (not Applecare); see an example for the warranty for an iMac:
http://www.apple.com/legal/warranty/products/embedded-mac-warranty-us.html
whereas the extended Applecare is referred to as that:
http://www.apple.com/legal/sales-support/

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

What's the difference between tax account in FTXP and OB40

Hi all,
There are two tax accounts link to same tax code in FTXP for different company codes, but in OB40 I only can assign one account to tax code. What's the difference between tax account in FTXP and OB40?
Thanks in advance.
babyyw
Edited by: babyyw on May 5, 2010 8:21 AM

Hi,
FTXP no need to create a request and it is easy but in OB40 system will ask you create request. and another thing is in FTXP it is at country level but in OB40 it is at chart of accounts level.

What is the difference b/t the macbook a1432 and a1181, i think i ordered the wrong case?

Similar Messages

Maybe you are looking for