What is the difference between Bridge Mode and sharing a public ip address?

Hello,
I would like to understand this difference, in general terms, and also in the context of my setup:
I have an office inside a business center where we are assigned a fixed ip address per computer, and I don't know whether it is better to use bridge mode or to share a public ip address in order to use the benefits of the new time capsule: internet access, hard drive sharing, mobile me back to my mac? Back to my mac does not seem to be working and I get the message that I net a modem with NAT protocol bla bla bla...but I'm also not sure whether the problem is with the setup as the manufacturer claims the protocol is supported.
Thank you for the help

"...share a public ip address..." enables the DHCP/NAT service on the Time Capsule.
"...bridge mode..." disables the DHCP/NAT service on the Time Capsule.

Similar Messages

  • What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

    What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

        Great question alczervik!
    LTE- is our 4G network.
    All CDMA/LTE Legacy are going to be related to our 1X, 3G/ EVDO network.
    Global is GSM. Meaning you can use Internationally.
    I hope this helps.
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • What is the difference between lock mode E and X.

    what is the difference between lock mode E and X.

    Hi
    The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table
    Lock modes:
    S (Shared):
        Several users (transactions) can access locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock set on an object that already has a shared lock will be rejected.
    E (Exclusive).
    An exclusive lock protects the locked object against all types of locks from other transactions. Only the same lock owner can reset the lock (accumulate).
    X (eXclusive non-cumulative):
      Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. Each further lock request will be rejected.
    O (Optimistic):
      Optimistic locks initially behave like shared locks and can be converted into exclusive locks.
    If it is helpful rewards points.
    Regards
    Pratap.M

  • What is the difference between Video-out and mirroring?

    What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
    I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
    I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
    Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
    There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
    I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
    So far not doing very well.

    Now found these but have had to give up on this adapter!
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://support.apple.com/kb/HT4108

  • 1. What's the difference between private mode in Safari which i have to turn on every time again when opening safari. It's a two click activity which i would love to be able to set in the preference as default.

    1. What's the difference between private mode in Safari which i have to turn on every time again when opening safari.
    It's a two click activity which i would love to be able to set in the preference as default. It's tyering when have to do it everyday a few times. (Yes, i'm one of many who have the "i like safari but since the update crash everyday a few times" syndrome...
    Yes, i have updated my system.
    Yes, i have repared disk permissions with disk utility.
    Am open for any other help in both cases. Thank you upfront
    2. and the "tell websites not to track me" under Safari - Preference - Privacy.

    That box should prevent websites using trackers to log your movements on the Web to benefit advertisers. I have no idea if it does.
    Safari can keep your browsing history private. When you turn on private browsing, Safari doesn’t remember the pages you visit, your search history, or your AutoFill information, so your partner cannot see where you have been, but you must also remember to also turn off acceptance of cookies.
    In all other respects Private Browsing is not as private as you might think:
    http://www.switchingtomac.com/tutorials/how-to-make-safaris-private-browsing-fea ture-actually-private/
    http://www.insanely-great.com/news.php?id=9054
    and then Apple's own advice from here: http://www.apple.com/pro/tips/privacy_safari.html
    "Note that the Private Browsing option does not prevent Safari from collecting cookies (the preference files automatically generated by many websites). The Reset Safari option clears all cookies. If you want to delete only certain ones, choose Preferences from the Safari menu, click the Security tab, and then click Show Cookies. You can select and delete individual cookies from the list that appears. Careful, though — if you’re a frequent web user, this list can be very, very long."
    which is itself incomplete, the relevant part being 'If you want to delete only certain ones.
    To that end it is useful to have Safari Cookies installed, which is the only cookie manager available for Safari:
    http://sweetpproductions.com/safaricookies/
    which automatically deletes all cookies not marked as 'favourites' when closing Safari. It does the same for Flash Cookies, but they are subject for themselves:
    From this website:
    http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/
    For those who do not know about Flash cookies, more properly referred to as Local Shared Objects (LSO), they operate in a similar way to regular browser cookies but are stored outside the purview of your browser, meaning you cannot delete them from within your browser, whether Safari, Firefox, Opera or any other. Typically they are issued from sites or 3rd party sites that contain Adobe Flash content. Since virtually all internet advertising is  delivered in Flash, Google/Doudleclick and all other internet advertising companies are sure to be tracking your browsing behavior with Flash cookies. These companies can see you traverse the Internet as you come upon the plethora of sites that contain their embedded advertising. Check out the Wikipedia entry here.
    In Mac OS X they are stored in the following location:
    /User’s Home Folder/Library/Preferences/Macromedia/Flash Player/#SharedObjects
    The settings for the Flash cookies are stored in:
    /User’s Home Folder/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys
    In OS X Local Shared Objects, or Flash Cookies, are appended with a .sol suffix. Flush deletes all the Flash cookies (.sol) and their settings.
    Flush can be downloaded from that page.
    If you want to retain certain Flash cookies but not others, the excellent add-on for Safari called SafariCookies now includes a setting for automatically deleting flash cookies you don't want to retain, when Safari is shut down, in the same as it deals with ordinary cookies:
    http://www.sweetpproductions.com/safaricookies/index.htm
    which not only does that but much more equally useful stuff!
    This article covers the issue in more depth:
    http://www.wired.com/epicenter/2009/08/you-deleted-your-cookies-think-again/
    Flash cookies are also known as 'Zombie Cookies' and are used by a number of firms, including Hulu, MTV, and Myspace. Graham Cluley, senior technology consultant at the internet security firm Sophos, told BBC News that the source of the trouble was Adobe Flash itself, which he called "one of the weirdest programs on the planet".
    "I think it's highly unlikely that these large companies have abused Flash cookies - which are different from browser cookies - with malicious intent," he said.
    "I think it's much more likely that the vast majority of users are simply oblivious to the bizarre way in which Adobe allows them to configure the software."
    http://www.bbc.co.uk/news/technology-10787882
    And a more recent article:
    http://www.nytimes.com/2010/09/21/technology/21cookie.html?_r=3&scp=1&sq=flash&s t=cse
    [b]Tracker cookies and the invisible web:[/b]
    – tags, web bugs, pixels and beacons that are included on web pages in order to get an idea of your online behavior.
    Ghostery tracks the trackers and gives you a roll-call of the ad networks, behavioral data providers, web publishers, and other companies interested in your activity.
    http://www.ghostery.com/about
    This provides an extension to Safari (also available for other browsers) that shows you what data tracking is active on each web page you visit, and enables you to block them.

  • Difference between bridge mode and routed mode on CSS

    Hi,
    Could some one tell me the difference between routed mode and bridge mode.
    Regards
    Neha

    Hi,
    routed mode:
    The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
    Bridged mode:
    The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
    Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
    Hope this helps.
    Kind regards,
    Dario

  • What is the difference between Topic Keywords and Index File Keywords?

    What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
    RH9.0.2.271
    I'm using Webhelp

    Hi there
    When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
    Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
    As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
    <meta name="MS-HKWD" content="BOFFO" />
    When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
    Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
    Hopefully this helps... Rick

  • What is the difference between jsp :include and server side include

    what is the difference between jsp :include and server side include(request dispatcher include method)????
    i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
    Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
    do suggest if u hav ny other diff in this context...

    The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
    If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
    Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
    - Saish

  • What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

    Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

    Any call made from the API will automatically be set to the “Session Timeout” period, no matter
    what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
    Short Session Timeout and Session Timeout in Excel Services
    Short Session Timeout and Session Timeout in Excel Services - Part 2
    Sessions and session time-outs in Excel Services
    above links are from old version but still applies to all.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • What are the differences between ECC5.0 and 6.0 new GL functionality

    Hi Experts,
    What are the differences between ECC5.0 and 6.0 new GL functionality.
    If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
    Best Regards,
    Dharani

    Dear,
    ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
    Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
    Transfer prices
    Statistical key figures
    Euro translation
    Audit Information System (AIS)
    Archiving
    Data retention tool
    Regards,
    Chintan Joshi.

  • What is the difference between document class and normal class

    Hi,
    Please let me know what is the difference between document class and normal class.
    And I have no idea which class should call as document class or call as an object.
    Thanks
    -Actionscript Developer

    the document class is invoked immediately when your swf opens.  the document class must subclass the sprite or movieclip class.
    all other classes are invoked explicitly with code and need not subclass any other class.

  • In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

    In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
    Thanks

    Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
    1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
    If you are a developer, you can do that with a command you can type into Terminal:
    sudo purge

  • What is the difference between local printing and remote printing in SAP

    Hello Nation,
    I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
    1.What is local printing in SAP ?
    2.What is Remote Printing in SAP?
    3.what is the difference between local printing and remote printing in SAP ?
    Thank you in Advance.
    Regards,
    -Mohamed Naveen.

    Hi,
    This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • What is the difference between Business System and Business Service?

    Hi
    Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
    Best Regards
    Ravi Shankar B

    HI,
    Business system:
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    Business Service:
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Regards,
    Sudheer.

  • What is the Difference between AQ adpater and JMS adapter??

    What is the Difference between AQ adpater and JMS adapter in BPEL11g??
    In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

    Go for AQ when using Oracle Advanced Queueing (the database stuff).
    Use JMS when using JMS (in memory of file queues)
    hth,
    Peter Paul

Maybe you are looking for