What is The difference between Cisco Ip phone 7960 & 7960G

What is the difference between Cisco Ip phone 7960 & 7960G?

The 7960G is a 6 button Global phone where all the buttons are the icons and there is no writing on the phone.
For more information,
http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a0080091984.html
The only GB capable phone out today is the 7971G -GE.
http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet0900aecd801c5c4a.html

Similar Messages

  • What is the difference between SmartNet and SMBS service level

    Good Afternoon
         I would like to ask if what is the difference between Cisco's SmartNet and Cisco's SMBS service level?
    Thank you

    Hi Rey,
    SMARtnet covers traditional Cisco products (enterprise products ie. ISR routers), Small Business Support Center covers the small business line.
    In the UC group of products, for some reason, Cisco considers the UC520, AP521, and WLC526 which are branded small business to be traditional Cisco products and are covered under SMARTnet. But, the UC540 and UC560 are covered by SBSC. One major difference in the UC arena is the support for CLI vs CCA config.
    However, I noticed your post was in the Small Business - switches category. If you have a small business switch  those are covered by SBSC not TAC. SBSC will support the CLI and web gui config of the small business switches, where CLI is applicable to the model.
    SBSC contracts tend to be for 3 year periods and can be significantly less expensive than SMARTnet agreements.
    Hope that helps.
    Best,
    David
    Please rate helpful posts and identify correct answers.

  • What is the difference between the passcode on my iPhone 5 and a password?  I am locked out of my phone.

    What is the difference between the passcode on my iPhone 5 and a password?  I am locked out of my phone.

    Not entirely sure what you are asking, but a passcode to unlock an iOS device is normally 4 digits long (so is a 4 digit code), though you can make it alphanumeric and longer (so effectively becomes a password).
    If you don't know the passcode to unlock your phone or it's showing the disabled screen then there are instructions on this page for how to reset a device : http://support.apple.com/kb/HT1212 - you should then be able to restore/resync your content to it.

  • What is the difference between MCU & Cisco TelePresence Server?

    Hello Pros,,
    I would like an answer for this question "What is the difference between MCU & Cisco TelePresence Server?" to help us find a solution that best fits our requirements . 
    also I would appreciate it if you refer to a document that directly discusses the difference in a straight-forward manner.
    Thanks for taking the time trying to help ,,  

    Nothing much has changed on the MCU side, it still has the same feature set really.  Only things that are notable that have changed is the addition of ClearPath and encryption for SIP calls are the two biggest features in the latest release, don't expect any large features for the MCU as Cisco works to leverage everyone to migrate to the TelePresence Server as most of the MCU product line can be migrated to a TelePresence Server and that is where the most active development is.
    Recent MCU changes can be seen in the MCU 4.5 Release Notes.
    Recent TelePresence Server changes can be seen in the TPS 4.0 Release Notes and TPS 4.1 Release Notes.
    In the most recent TPS 4.1 release, which came out last month, no MCU features were added because they were focusing most if not all the development on scheduling with TMS and Conductor, and to improve the existing TPS features already in place.

  • What is the difference between Firefox and Firefox os please. I have a Samsung galaxy s3 mini what one would you recommend would be better for my phone

    What is the difference between Firefox and Firefox os, and what one is better for the Samsung galaxy s3 mini, Please could you recommend which one is the best and most suitable for my phone please. Many thanks Michelle Petch

    Thank you for your question.
    Firefox is basically a browser.And Firefox OS is an Operating System.You can install Firefox in your SGS3 just like an android application.But if you want Firefox operating system on it. then you have to flash the ported Firefox OS on your device. Then it will be a completely different standalone operating system.you cannot install android applications on it.
    To read more technical difference read:
    Firefox OS:
    http://en.wikipedia.org/wiki/Firefox_OS
    Firefox Browser:
    http://en.wikipedia.org/wiki/Firefox
    Hope this clears your query.Thank you

  • What is the differences between İphone 4s MD235AE/A and İphone 4s MD235AE-STC

    I am going to purchase İphone 4s from Saudi Arabia, but there are two model md235ae/a and md235ae-stc
    what is the differences between these two ?
    thanks
    merve

    Here's the 4S Spec:
    iPhone 4S - Technical Specifications
    ... and here's the iPhone 4 Spec:
    iPhone 4 - Technical Specifications
    Basically, the 4S is faster and has a better camera.

  • The difference between Cisco SFP Module GLC-SX-MMD and GLC-SX-MMD ?

    The two modules seem to be similar, What's the difference between GLC-SX-MM and GLC-SX-MMD?

    Hi, they're much the same, but the latter has DOM...
    https://supportforums.cisco.com/discussion/11560351/difference-between-multimode -fiber-optics

  • WHAT'S THE DIFFERENCE BETWEEN.....

    Hi friends,
    Please enlighten me ....
    What's the difference between using this.....
    1. Add User command functionality to ALVgrid report
    In order to add user command functionality to the ALV grid you need to perform the following steps:
                        1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include 'USER_COMMAND' FORM
                    2. Create 'USER_COMMAND' FORM
    call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'
                I_callback_user_command = 'USER_COMMAND'   "see FORM
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
          FORM USER_COMMAND                                          *
          --> R_UCOMM                                                *
          --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
      Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
        Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDCASE.
    ENDFORM.
    and using this----
    2. Add User command functionality to ALVgrid report
    In order modify PF_STATUS of ALV grid report you need to perform the following steps:
         1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include:
                        i_callback_pf_status_set = 'SET_PF_STATUS' statement.
         2. Create 'SET_PF_STATUS' FORM
         3. Create pf_status (i.e. 'ZNEWSTATUS').
              - It is recommend that you copy standard status'STANDARD' from function group SALV
                and modify it accordingly. ALV standard function codes always start with '&'.
    call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'
                i_callback_pf_status_set = 'SET_PF_STATUS'   "see FORM
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
          FORM SET_PF_STATUS                                         *
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZNEWSTATUS'.
                      "Copy of 'STANDARD' pf_status from fgroup SALV
    ENDFORM.
    I have assumed the former is used  when I am selecting a field on the list
    and the later when I have  created a pf-status. I mean to say... I have slected a field and click on some button to get further information.
    Please remove my confusion.
    Thanking you alll in advance,
    Hari Kiran.

    From their Terms & Conditions page:
    Grade A - Working phone in as new/mint condition. Complete with original box and accessories as sold new.
    Grade B (and Discounted) - Working phone in good condition with slight cosmetic blemishes. Charger supplied. If the phone includes a music player/radio then it is supplied with headphones. If the phone has PDA functionality a sync cable and/or docking cradle is supplied. Missing original packaging.
    Grade C (and Budget) - Working phone in poor cosmetic condition. Original or 3rd party charger supplied but missing accessories and original packaging.
    Substitute iPod for phone and I think it makes sense...
    tt2

  • What's the difference between "local reminder" and "push notification?

    A friend has been bugging me about this, does anyone know what's the difference between "local reminder" and "push notification" in an iPhone app?

    In a nutshell, local notifications are popup notifications from applications on your phone, based on data that's already on the local phone.  Push notifications are popup notifications you get when new info (like an email, tweet, or update from something like Facebook) gets pushed to your device from a server. 

  • What is the difference between E-Series and Commun...

    Both E-series and Communicators are business phones,then what is the difference between them?
    What is so special that there are two types of smartphones.

    Communcatiors is just a name that nokia used to describe it's larger fold open business phones.
    The last (and still the current) communicator was the E90 which uses the S60 operating system, so it is both an E series and a communicator.  It was also the first (and only) communicator to use S60.
    The long discontinued communicators of the past used a different operating system, S80. S80 and S60 are not cross compatible with each other.
    S80 was dropped in favour of S60 when the E90 launched.  This was a cost saving exercise so that nokia only had one smartphone OS to concentrate resources on.
    Message Edited by psychomania on 18-Aug-2009 03:12 PM

  • Exporting metadata from OWB to OLAP: What's the difference between...

    What's the difference between create Analityc Waorkspace or not? if I don't created the metadata will deployied in DB? so can I access from BI Beans and see dimensions and cubes?
    Please help.
    Thanks in advance.

    1. No.
    2. Yes, with the Mogrify plugin.
    Sent from phone.

  • What si the difference between network, basic, premier, limited? [SOLVED]

    Can someone explain me what is the difference between:
    Enterprise Linux Network
    Enterprise Linux Basic
    Enterprise Linux Premier
    Enterprise Linux Basic Limited
    Enterprise Linux Premier Limited
    thanks
    m.

    Those are all types of Support. You can purchase them at the Oracle Store;
    http://oraclestore.oracle.com/OA_HTML/ibeCZzpHome.jsp?minisite=14405&respid=1435532&grp=STORE&language=US
    Network:
    get 24x7 access to a year worth of patches, fixes, and security alerts for Enterprise Linux 4 and Enterprise Linux 3 through the Unbreakable Linux Network (ULN). Phone and web based support is not included.
    Basic:
    You will have 24x7 access to log unlimited number of service requests either via the web or the phone. And you will receive access to patches, fixes, and security alerts through the Unbreakable Linux Network (ULN). Limited to certain amount of CPU's
    Premier:
    You will have 24x7 access to log unlimited number of service requests either via the web or the phone. And you will receive access to patches, fixes, and security alerts through the Unbreakable Linux Network (ULN). Unlimited CPU's
    and so on.......

  • What is the difference between "viewable/ printable payment history" and my "payments received history"? Shouldn't my "payments received" (money verizon got from me) be my "payment history"be my

    What is the difference between "viewable/ printable payment history" and my "payments received history"? Shouldn't my "payments received" (money verizon got from me) be my "payment history"?

    I have not directly myself. One of the reps put me on hold while they said they spoke to finical services. He said they would not turn off my phone while he (the rep) looked into the problem. He couldn't give me a phone # to call him back the next day and told me he would call me instead on my home land line phone #. But what I got the next day was a text message that started with" DO NOT RESPOND" to this text message and it said that I was past due on my account, and that it was due immediately. signed out again with only his first name and no phone # again. Thing is he promised he could help in my first conversation with him, where I had started with "can I speak with a supervisor as I did not want to have to repeat the whole spiel again as he was going to be my third time". He said he was authorized to take care of all & any problems and I did not need a supervisor. I took him at his word and said OK. Turns out like I said earlier…I wasted 2 hours on the phone. Can't find him as I don't know what call center and no last name. I should have gotten that up info front. Hindsight is 20/20.

  • What's the difference between mac app store, app store, iTunes store?

    what's the difference between mac app store, app store and whatever itunes stores out there?

    If you saying that the App Store on my phone and the App Store section of itunes on my computer are the same store,
    It is.
    could you please be kind enough to show me how to reach the 724 apps on my computer (just to look at, not to buy) that I get on my iPhone when I type: "chinese transla". 
    If I search the iTunes Store for "chinese translation", I get dozens of apps listed. Make sure you're searching the iTunes Store, not your library. The search box should say "search store". Also confirm that both your iPhone and iTunes on your computer are pointed to the same country's iTunes Store. Different countries' stores carry different items, so it's possible your computer is pointed to a different country's store. Look at the bottom of the iTunes window and make sure the round flag icon is the one for your country.
    Maybe the App Shopper has all the same apps that are on my phone?  I just looked, they say they have 1,000 apps.  Is this a safe site to buy from? 
    App Shopper is not a store. The only store you can buy iPhone apps from is the iTunes Store. App Shopper is just a compendium site that lists apps that are available in the iTunes Store. When you click to buy an app, you're taken to the iTunes Store.
    Regards.

  • What's the difference between "login block-for X attempts X within X" and "security authentication failure rate X"?

    What's the difference between, just for example, "login block-for 100 attempts 15 within 100" and "security authentication failure rate 3"?
    Please ignore the numbers, I need to know what the differences are in commands and what they do, what they affect.

    security authentication failure rate number_of_failed_attempts : A global configuration mode command used to specify the maximum number of failed attempts (in the range of 2 to 1024) before introducing a 15-second delay
    login block-for 100 attempts 15 within 100 : Block all access after 15 failed login attempts within 100 Secs for the period of 100Secounds (1.40 Minutes).
    The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.
    The login block and login delay options introduced by this feature can be configured for Telnet or SSH virtual connections. By enabling this feature, you can slow down "dictionary attacks" by enforcing a "quiet period" if multiple failed connection attempts are detected, thereby protecting the routing device from a type of denial-of-service attack.

Maybe you are looking for

  • What's wrong with my "Contact Me" page?

    My website has a way to go before it's "done", but I've uploaded it to see what works and what doesn't. On the Contact Us page http://www.dohaexpatmumsandkids.com/Contact.html , I want an e-mail to be sent to me when the user completes the box; howev

  • Add 1 Second to the specified date

    Hi , I have a date like "20061021 22:12:60". I need to add one second to this date string. Can you please tell me how to do it. I used SimpleDateFormat , but don't know how to add . If it is a Calender instance, i can add one sec. any ideas or sample

  • 3 minutes from wake from sleep  to control

    This issue started a couple months ago, I was still in 10.8 and thought upgrading to 10.9 would help, it has not. After I put my Macbook pro to sleep, when I open the lid it can take as long as three minutes until I have full control of the desktop.

  • I do not see the word Java under Plugins. I need to do an online course and i need Java

    I looked under tools on add-ons and clicked on plugins. It said to look for Java and enable it, but I saw no Java there, and I went to the java.com website and downloaded it. Where is it?

  • 845PE FIR fans some observations

    Hi May may be of interest. After failing to get PCalert4 to display the CPU and Sys fan speeds as shown correctly in the BIOS I tried a different program called Speedfan 4.07 free from tucows This also showed the CPU and Sys fans as zero until I chan