What is the difference between Condition Type PB00 and PBXX

Hallow all,
Can anybody please explain, What is the Difference between Condition type PB00 and PBXX in Materials Management Pricing?
And also please explain control or Application of both on Price determination ??
Thanks in Advance !!!!!

Hi,
PB00 condition type is used for automatic pricing in PO
PBXX condition type is used for manual pricing in PO
In Pricing access sequence play a vital role . If you need pricing automatic in the PO, you have use of Access Sequences and Schema Group of Vendor.You can see the difference in both standard condition type PB00 and PBXX, where as PB00 is assigned to Access sequence(0002)but in case of PBXX no access sequense assigned.
Regards,
Biju K

Similar Messages

What is the difference between Process Type TRIGGER AND CHAIN

What is the difference between these two process types. When I am looking process types, I want to provide information only about process chains and not individual steps of process chain. Looks like one can do using either.
Along the same line, I am looking at data from RSPCPROCESSLOG, no where this table has a column process chain id. So How od I find information about a process chain.
Thanks a lot,

A "Chain Process" can be a a step in a Process Chain as well. For Example: So you could have the following Process Chain:
Process Chain Example
Step 1. TRIGGER (Execute Daily at 4am)
Step 2. DTP_LOAD Execute DSO Load
Step 3. DTP_LOAD Execute InfoCube Load
Step 4. CHAIN Execute Master Data Process Chain
I believe the "Master Chain" is called a "MetaChain" since it controls the start of another Process Chain.
Hope that helps...

Condition types PB00 and PBXX

Dear Experts,
1) Can anybody please explain that can we use Condition type PB00 in number of Pricing procedures. like i have three pricing procedures, local purchase, Import Purchase,
External Service Pricing procedure.
what is recommend, eiether to use same one (PB00) or maintain seperate condition type for each Pricing procedure ?
2) What is the difference between Condition type PB00 and PBXX ?
Waiting for your valuable reply
Thanks in Advance

Dear,
The difference between pricing conditions PB00 and PBXX is :
PB00- automatic pricing - can be used for automatic pricing determination
PBXX- manual pricing - used for manual pricing.
When you maintain the pricing condition for the PO, the system will look at the available condition records (for PB00) and make the automatic pricing determination. In case, such condition records were not defined, then it is mandatory that you have to maintain manually the pricing condition where PBXX will be automatically defaulted in replacement for PB00.
Regards,
Syed Hussain.

What is the difference between message type and element

hi,
When we create a new variable in BPEL we get the option to create 'simple', 'message type', 'element'
I would like to know what is the difference between message type and element.
thanks
Yatan

A message is part of the service and is usually assigned to one of the operations in the wsdl. For example getPhoneNumer() operation may have an input message of personInput and output of phoneNum. These messages would have a type...maybe of string or decimal or a complex type with multiple values.
An element is typically a complex type that could be defined in an xsd file.
When you create a variable in the bpel, you can declare it as a message or a simple type or an element. As I understand it, the simple types are pre-defined in the schema namespace such as string, decimal, date, etc.
The elements are defined in the xsd files or wsdls and can be a combination of strings, dates, etc or other stuff as well.
The messages are defined in the wsdl as part of the input/output but they are typically assigned a type just like other variables you create.

What is the difference between version 4.7EE and ECC 5.0

DEAR EXPERTS
what is the difference between version 4.7EE and ECC 5.0?WHAT ARE THE ADDITIONAL FUNCTIONALTIES IN
ECC 5.0?

hi,
Diff between 4.7 and ECC 5.0:
1. 4.7 is on R/3 platform, while ECC 5.0 is on mySAP ERP 2004
2. ECC 5.0 is having ESA(enterprise Serviceoriented Architecture)
3.ECC 5.0 is web enabled with Netweaver technology.
mySAP ERP is the "newer" ERP with numbering conventions like ECC (which stands for ERP Central Component) 5 or 6
mySAP (aka mySAP.com) Business Suite contains Solutions like CRM, SCM etc. The important thing to note here is that this contains mySAP ERP, the one above
mySAP All-in-One Solution is designed for smaller companies (the ad that says SAP is not just for large companies but for great companies where the above mentioned functionality is scaled down and is made to run on one database on a PC type of setup as opposed to the full blown architectures on which SAP traditionally set to run

What is the difference between organisation payment method and Assignment payment method?

What is the difference between organisation payment method and Assignment payment method?
As i am a new bie, i am curious to know this though it might sound a silly question.
Thank you,
Kuton

You can create an Organization payment method of any Payment type(Cash, Check, BACS, NACHA etc) under the same country.
All these will be valid payment methods on the payroll description form.
And you can even attach these to a person.
In which case you will have a Base currency (say USD) and payment currency (say GBP).
These cases are not normal and only used by people who use a single BG for paying employees in 3-4 countries.
So, unless you need to pay in different currencies, do not use it.
Cheers,
Vignesh

What is the difference between lock mode E and X.

what is the difference between lock mode E and X.

Hi
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table
Lock modes:
S (Shared):
Several users (transactions) can access locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock set on an object that already has a shared lock will be rejected.
E (Exclusive).
An exclusive lock protects the locked object against all types of locks from other transactions. Only the same lock owner can reset the lock (accumulate).
X (eXclusive non-cumulative):
Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. Each further lock request will be rejected.
O (Optimistic):
Optimistic locks initially behave like shared locks and can be converted into exclusive locks.
If it is helpful rewards points.
Regards
Pratap.M

What is the difference between Macs Voice Over and the text to talk feature

what is the difference between Macs Voice Over and the text to talk feature

Voice Over doesn't need someone to type in the text first. Voice Over works with specific screen displayed information so that a blind person can know where his/her cursor is or what is being displayed. Although it is an application of text to talk it's more than the text to talk feature.

What is the difference between qued delta update and serialized delta upda

what is the difference between qued delta update and serialized delta update?

Hi Ks Reddy,
Queued Delta:
In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
Direct Delta:
In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Business Intelligence Performance Tuning [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
How to load data
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Delta Types and methods;&#57245;
Hope this helps.
****Assign Points if Helpful*****
Regards,
Ravikanth

What is the difference between generate partner profile and creat partner

What is the difference between generate partner profile and creat partner profile ?

Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
Generation of Partner Profiles
The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
ORDERS
ORDCHG
ZINVRV
ORDRSP
INVOIC
FIDCMT
The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
generate partner profiles tcode BD82
creating partner profiles tcode WE20
 There are two methods for maintaining the partner profile:
 Maintain partner profile manually:
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
 Generate partner profile:
Prerequisite: The current distribution model is distributed to all participating systems.
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
Regards
Vasu

What is the difference between Recon. Account and Alternative Recon. Accoun

hi
any body please tell me . What is the difference between Recon. Account and Alternative Recon. Account.

Hello sairama,
Reconciliation account- For each subledger account , you must keep at least one reconciliation account in the general ledger. When you post to an account in the subledger, the system automatically posts to the corresponding reconciliation account. The "Receivables from goods and services" account is an example of a reconciliation account for customers. Enter Customer in the Reconciliation account for account type field. Enter a Vendor in this field for a vendor reconciliation account. Using the reconciliation account procedure, it is possible to create a balance sheet and a profit and loss statement at any time, since the amounts posted to subledger accounts are also posted automatically in the general ledger.
During regular reconciliation, you check whether the balance of the reconciliation account matches the balance of the corresponding subledger account.
You define reconciliation accounts by specifying in the G/L account master record the account type (such as fixed assets, vendor or customer) for which the account is to be used. In this way, the account can only be assigned to accounts in the corresponding subledger. You set the assignment of the subledger account to a reconciliation account in the master record of the subledger account. You cannot post to reconciliation accounts manually .
============================================================
Alternative Reconciliation account- Special G/L transactions are identified by a special G/L indicator. The system uses the specifications (posting key and special G/L indicator) to determine the alternative reconciliation account.
When you post a special G/L transaction, the system does not post to the normal reconciliation accounts but instead automatically to alternative accounts, that is, special G/L accounts. Consequently, you do not transfer the balances of these accounts either. Instead, the system posts to the appropriate accounts automatically when the open items are transferred.
Hope I had been able to help you. Please assign points.
Rgds
Manish

What is the difference between string != null and null !=string ?

Hi,
what is the difference between string != null and null != string ?
which is the best option ?
Thanks
user8729783

Like you've presented it, nothing. There is no difference and neither is the "better option".

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

What is the difference between a mac-book, and an I-pad?

What is the difference between a mac-book and an I-pad?

The Macbook is a computer (running Mac OS X), an iPad is a tablet (running iOS). What are thinking of using it for ? The Mac is more powerful than iPad, so if you need processing power then that will be better suited for your needs. If you will mainly be using it for media (films, music), internet browsing, emails, ebooks, then an iPad would be sufficient.
Macbook Air : http://www.apple.com/macbook-air/
MacBook Pro : http://www.apple.com/macbook-pro/
iPad Air : http://www.apple.com/ipad-air/

Condition type PB00 and PBXX, coming in the same PO Item

Hi,
In the PO (created with reference to Outline Agreement), condition types PB00 and PBXX are coming in the same line item.
In the PO output, the PB00 value is also showing up and PBXX value is also showing up. User entered PBXX value as 350000 dollars which is right, however system is picking 1.2 million dollar of PB00 from outline agreement which is not intended here. As a result of that the output going to Vendor is exceeding more than 1.2 million dollar instead of 350,000 dollars. I cannot change or delete any othe condition types.THis is a production problem.
Has anyone faced this problem. I appreciate your reply in advance.
Thanks,

Well, thanks Saurav and Prabhakaran, however the problem still stays.
The contract is created for services (1 lot), so the dollar amount can vary depending upon the service rendered by the consultant.
That mean user will only enter the service amount.
Saurav, system should not copy down PB00, it should come by itself when user enters the specific amount. And it comes from contract. PBXX should only appear if there is no PB00 maintained in the contract. This is not the case. The service amount is maintained in the contract. Also, I don't think that PBXX and PB00 should come in one line item together as normal system behaviour & as a normal business process too. Moreover, it is not happeniing in the other two line items - line item 20 and line item 30 are fine. The pricing analysis shows both the conditions as found - PB00 and PBXX, so I could not take any clue from analysis too.
Prabhakaran, system is only behaving incorrectly for line item 10. It is behaving as expected (good ) for other line items and other PO's. So, we cannot touch the pricing procedure as that will affect other line items.
Regards

What is the difference between Condition Type PB00 and PBXX

Similar Messages

Maybe you are looking for