What is the difference between elements and cs6

What the difference between Photoshop CS6 and Elements?

vitaltheatre wrote:
Photoshop Elements is NOT the same at Photoshop CS6. Photoshop 6 has transitioned into Creative Cloud (CC)
No there are many versions of Photoshop old versions do not go away. Photoshop is an evolving program each evolution receives a new name and a version number the version number is important when you develop code for Photoshop. So Photoshop 6 is version 6 that evolved to Photoshop 7 version 7 to CS version 8 to CS2 version 9 to CS3 version 10 to CS4 version 11 to CS 5 version 12 to CS6 version 13 to CC version 14 to CC2014 version 15. All exist. Version 15 is not backwards compatible with any previous version of Photoshop feature and support have been removed and new features and support added.
CS6 though is a bit odd for the are different versions of CS6 the is the perpetual version and the subscription versions and there not the same all do not have the same features. If you want to split hairs there are actually 5 version of CS6 and if you want to count 32 bit and 64 bit modules there are 8. There are only 3 version numbers though for CS6 wit all update applied. Mac perpetual version 13.0.6 Windows perpetual version 13.0.1.3 and the Mac and PC subscription version 13.1.2. The perpetual versions can be standard or extended Photoshop wher the subscription version is Photoshop extended.
By the same token there are many version of Photoshop Elements. All version of element do not many of the features that Photoshop in general has. Its a lot cheaper and it has much less function then Photoshop. For many Elements has all the function that they want. There is less to learn and Element has some hand holding feature built in for the novice user that is something Photoshop does not have....

Similar Messages

What is the difference between Elements and Elements 9 ?

I have just installed Elements 9 and the 6.4 update. I seem to have both Elements and Elements 9 to choose from, which is the correct one? Is there a difference?
Thanks

Do you have a mac? The one without the version number is the actual editor program. The file with the version number in the name and the little black alias arrow on the icon is a shortcut to the Welcome Screen.
This is the editor:

What is the difference between Elements & CS6

What is the difference between Elements & CS6
Message title was edited by: Brett N

There are many differences, too many to list really, but here are some of the major ones:
1. Elements comes with the catalog based Organizer. CS6 has the file navigation based Bridge.
2. The Elements Editor has stripped down versions of many of the same tools that CS6 has. Same tools, fewer options.
javascript:;
3. Elements Editor has Quick and Guided editing modes to simply workflow to the most basic needs.
4. Elements does not support CMYK and has very little support for 16-bit images.
For a more comprehensive guide, please see:
FAQ: Why is Photoshop Elements cheaper? What's different about Photoshop?

What's the Difference Between OLAP and OLTP?

HI,
What's the difference between OLAP and OLTP ? and which one is Best?
-Arun.M.D

Hi,
The big difference when designing for OLAP versus OLTP is rooted in the basics of how the tables are going to be used. I'll discuss OLTP versus OLAP in context to the design of dimensional data warehouses. However, keep in mind there are more architectural components that make up a mature, best practices data warehouse than just the dimensional data warehouse.
Corporate Information Factory, 2nd Edition by W. H. Inmon, Claudia Imhoff, Ryan Sousa
Building the Data Warehouse, 2nd Edition by W. H. Inmon
With OLTP, the tables are designed to facilitate fast inserting, updating and deleting rows of information with each logical unit of work. The database design is highly normalized. Usually and at least to 3NF. Each logical unit of work in an online application will have a relatively small scope with regard to the number of tables that are referenced and/or updated. Also the online application itself handles the majority of the work for joining data to facilitate the screen functions. This means the user doesn't have to worry about traversing across large data relationship paths. A heavy dose of lookup/reference tables and much focus on referential integrity between foreign keys. The physical design of the database needs to take into considerations the need for inserting rows when deciding on physical space settings. A good book for getting a solid base understanding of modeling for OLTP is The Data Modeling Handbook: A Best-Practice Approach to Building Quality Data Models by Michael C. Reingruber, William W. Gregory.
Example: Let's say we have a purchase oder management system. We need to be able to take orders for our customers, and we need to be able to sell many items on each order. We need to capture the store that sold the item, the customer that bought the item (and where we need to ship things and where to bill) and we need to make sure that we pull from the valid store_items to get the correct item number, description and price. Our OLTP data model will contain a CUSTOMER_MASTER, A CUSTOMER_ADDRESS_MASTER, A STORE_MASTER, AN ITEM_MASTER, AN ITEM_PRICE_MASTER, A PURCHASE_ORDER_MASTER AND A PURCHASE_ORDER_LINE_ITEM table. Then we might have a series of M:M relationships for example. An ITEM might have a different price for specific time periods for specific stores.
With OLAP, the tables are designed to facilitate easy access to information. Today's OLAP tools make the job of developing a query very easy. However, you still want to minimize the extensiveness of the relational model in an OLAP application. Users don't have the wills and means to learn how to work through a complex maze of table relationships. So you'll design your tables with a high degree of denormalization. The most prevalent design scheme for OLAP is the Star-Schema, popularized by Ralph Kimball. The star schema has a FACT table that contains the elements of data that are used arithmatically (counting, summing, averaging, etc.) The FACT Table is surrounded by lookup tables called Dimensions. Each Dimension table provides a reference to those things that you want to analyze by. A good book to understand how to design OLAP solutions is The Data Warehouse Toolkit: Practical Techniques for Building Dimensional Data Warehouses by Ralph Kimball.
Example: let's say we want to see some key measures about purchases. We want to know how many items and the sales amount that are purchased by what kind of customer across which stores. The FACT table will contain a column for Qty-purchased and Purchase Amount. The DIMENSION tables will include the ITEM_DESC (contains the item_id & Description), the CUSTOMER_TYPE, the STORE (Store_id & store name), and TIME (contains calendar information such as the date, the month_end_date, quarter_end_date, day_of_week, etc).
Database Fundamentals > Data Warehousing and Business Intelligence with Mike Lampa
Search Advice from more than 250 TechTarget Experts
Your question may have already been answered! Browse or search more than 25,000 question and answer pairs from more than 250 TechTarget industry experts.

What's the difference between boxing and unboxing?

What's the difference between boxing and unboxing, I'm a bit confused?
Is autoboxing the same as boxing?
This is what I know so far:
-This is boxing, i think:
int []arrayset = {1,2,3};but I don't understand what unboxing is, can someone explain it to me.

I did little research, but please correct me ifI'm
wrong:
Is this similiar to unboxing:
System.out.println(intArray[0] + intArray[1] +
intArray[2]);
Only if intArray is declared asInteger[]
intArray ...Then the Integers at intArray[0] etc are unboxedinto
int primitives before adding.Did you try that before you posted it? Autoboxing is
applied only to an individual primitive/wrapper.
Arrays and collections aren't subject to
autoboxing/unboxing. Basically, the compiler will
fill in constructs such as Integer.valueOf() for you,
it doesn't go as far as generating loops and new
arrays for you
OP, as Peter said, the difference between boxing and
unboxing is merely one of direction. Autoboxing wraps
a primitive up for you, auto-unboxing extracts the
primitive from a wrapperAm fully aware of that, the OP's example contained references to array elements but it was not clear whether that array was declared as Integer[] or int[], hence my answer.
And just for the recordInteger[] intArray = new Integer[] {1, 2, 3}; // autoboxing
System.out.println(intArray[1] + intArray[2]); // autounboxing
// while ...
int[] intArray = new int[] {1, 2, 3}; // no boxing
System.out.println(intArray[1] + intArray[2]); // no unboxingis what i meant.

Hi guru's what is the difference between table and temlate in smartforms

hi guru's what is the difference between table and temlate in smartforms

Hi Vasu,
Template is used for proper allignment of data which table is used for displaying multiple data.
We can say Template is for static data and Table is for dynamic data.
Suppose we have a requirement in which we have to allign the customer address in such a way as shown below:-
Name- Vasu Company- WIPRO Location- Chennai
Desig- S/W Native - Mumbai
Then for proper allighnment we can create a template and split that into 3 columns and 2 rows and create text elements for each cell display a proper allighned data at the output.
When we include a template inside a loop it gives the same property as a table.
When we have mutiple data which is to be extended to the next page like when we display all employee details in a company we use table.
Table has 3 sections , HEADER, ITEM ,FOOTER
The header secntion will be executed once and it will loop at the item level. at the end footer will be executed.
Hope this gives u some idea..
Please reward if useful
Regards,
sunil kairam.

IN smartfprms what is the difference between Tempalete and Text?

IN smartfprms what is the difference between Tempalete and Text?

hi
i think should ask diff. b/w Tempalete and Table , Text is defined to write Out on SF weather it is static or Table data.
u have to define Text Element in both (Tempalete n Table)
and diffrence b/w Table n Tempalete is well define by above answer.
reward points if useful.

What is the difference between GRAC_USER and GRFN_USER?

Hi,
Can any one please help me to know what is the basic difference between the two auth objects?
What is the difference between GRAC_USER and GRFN_USER.
Thanks!

Hi,
GRFN_USER is used to controls the access to perform your own or central delegation. It has only the Activity element.
GRAC_USER allows you to restrict activities based on the following attributes: user group, user ID, connector, user group, orgunit.
Kind regards,
Karolina

What is the difference between MOVE and WRITE TO ststement?

Hi
What is the difference between MOVE and WRITE TO ststement?
When do we use both of them?
Thank You

Hi,
MOVE
Syntax
MOVE source {TO|?TO} destination.
destination {=|?=} source.
Effect
Both these statements assign the content of the operand source to the data object destination. The variants with the language element TO or the assignment operator = are valid for all assignments between operands that are not reference variables, and for assignments between reference variables for which the static type of source is more specific than or the same as the static type of destination(narrowing cast).
Variants with the language element ?TO or the assignment operator ?= (casting operator ) must be used if the source and destination are reference variables and the static type of source is more general than the static type of destination (widening cast). For assignments between operands that are not reference variables, use of the question mark ? is not permitted.
The data object destination can be any data object that can be listed at a write position, and the data object source can be a data object, a predefined function or a functional method (as of release 6.10). The data type of the data object destination must either be compatible with the data type of source, or it must be possible to convert the content of source into the data type of destination according to one of the conversion rules.
Notes
If source and/or destination are field symbols, then, as in all ABAP commands, the system works with the content of the data objects to which the field symbols point. The actual pointer content of a field symbol can only be changed using the statement ASSIGN or the addition ASSIGNING when processing internal tables (value semantics). If source and destination are reference variables, the reference contained in source is assigned to destination (reference semantics).
Strings and internal tables are addressed internally using references. When assignments are made between strings and between internal tables (as of release 6.10), only the reference is transferred, for performance reasons. After the assignment, the actual string or the actual table body of the source as well as the target object are addressed (sharing). When the object is accessed to change it, the sharing is canceled and a copy of the content is made. The sharing is displayed in the memory consumption display of the ABAP debugger and in the Memory Inspector tool (as of release 6.20).
Obsolete Form: MOVE PERCENTAGE
Exceptions
Catchable Exceptions
CX_SY_CONVERSION_NO_NUMBER
Cause: Operand cannot be interpreted as number
Runtime Error: CONVT_NO_NUMBER (catchable)
CX_SY_CONVERSION_OVERFLOW
Cause: Overflow with arithmetic operation (type P, with specified length)
Runtime Error: BCD_FIELD_OVERFLOW (catchable)
Cause: Operand too large or (intermediate) result too large
Runtime Error: CONVT_OVERFLOW (catchable)
CX_SY_MOVE_CAST_ERROR
Cause: Source or target variable are not reference variables
Runtime Error: MOVE_CAST_REF_ONLY
Non-Catchable Exceptions
Cause: Source field (type P) does not contain correct BCD format.
Runtime Error: BCD_BADDATA
Cause: Assignment for deep structures not permitted if these overlap.
Runtime Error: MOVE_COMPLEX_OVERLAP
Cause: Type conflict with the assignment between object references.
Runtime Error: MOVE_INTERFACE_NOT_SUPPORTED,
Runtime Error: MOVE_IREF_NOT_CONVERTIBLE,
Runtime Error: MOVE_IREF_TO_OREF,
Runtime Error: MOVE_OREF_NOT_CONVERTIBLE
Cause: Type conflict with the assignment between data references.
Runtime Error: MOVE_DREF_NOT_COMPATIBLE
Cause: Assignment between the types involved not supported.
Runtime Error: MOVE_NOT_SUPPORTED
Cause: Constants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED
Cause: onstants and literals must not be overwritten.
Runtime Error: MOVE_TO_LIT_NOTALLOWED_NODATA
Cause: During a loop in an internal table, an attempt was made to overwrite a reference variable that is linked with the internal table by REFERENCE INTO.
Runtime Error: MOVE_TO_LOOP_REF
Write
Syntax Diagram
WRITE - TO
Syntax
WRITE {source|(source_name)} TO destination
 [int_format_options].
Effect:
This statement assigns the formatted content of the data object source, or the formatted content of the data object whose name is contained in source_name, to the data object destination. The data objects source_name and destination must be character type and flat. source_name can contain the name of the data object to be assigned in upper or lower case. If the data object specified in source_name does not exist, the assignment is not executed, and sy-subrc is set to 4.
The statement WRITE TO has the same effect as the statement WRITE for lists. This statement formats the content of source or the source field specified in source_name as described in the field. It does not, however, store the result in an output area of a list in the list buffer, but instead stores it in a variable. The output length is determined by the length of the variable.
The same additions int_format_options can be specified for formatting the content as in the statement WRITE for lists, except for NO-GAP and UNDER.
System fields
sy-subrc Meaning
0 The data object specified in source_name was found and the assignment was executed.
4 The data object specified in source_name was not found and the assignment was not executed.
For the static specification of source, sy-subrc is not set.
Note:
If destination is specified as an untyped field symbol or an untyped formal parameter, and is not flat and character-type when the statement is executed, this leads to an untreatable exception in a Unicode program. In non-Unicode programs, this only leads to an exception for deep types. Flat types are handled as character-type data types.
Example:
After the assignment, the variables date_short and date_long receive the current date in the order specified in the user master record. The variable date_long also contains the defined separators, as the output length is sufficiently long. The content of the variable date_mask is formatted according to the formatting addition DD/MM/YY.
DATA: date_short(8) TYPE c,
 date_long(10) TYPE c,
 date_mask(8) TYPE c.
WRITE sy-datum TO: date_short,
 date_long,
 date_mask DD/MM/YY.
Exceptions
Non-Catchable Exceptions
Cause: Negative length specified for offset/length
Runtime Error: WRITE_TO_LENGTH_NEGATIVE
Cause: Negative offset specified in offset/length
Runtime Error: WRITE_TO_OFFSET_NEGATIVE
Cause: Offset specified in offset/length specification is longer than the field length.
Runtime Error: WRITE_TO_OFFSET_TOOLARGE
Thanks
sunil

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What is the difference between exists and in

hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
Thanks

You get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What is the difference between, DSO and DTP in BI 7.0

Hi Guru's
what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
points will be assined?
Thanks & Regards,
Reddy.

Hi,
The data will be replicated in the same way as we do in 3.5.
Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
blogs:
/people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
Re: How to identify Header, Item and Schedule item level data sources?
For Transformations in BI:
http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
For DTP:
DTP:
http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
For DSO:
Data Store Objects:
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Reg
Pra

What is the difference between elements and cs6

Similar Messages

Maybe you are looking for