What is the difference between iwork and microsoft office for mac?
I was wondering which one is worth the money.
+I was wondering which one is worth the money.+
It depends on why you want iWork or Office. If you work in a group where Office is the main collaboration app, you need it and it's worth it. If you work independently and don't plan to do much collaboration with Office users, but you still need a nice productivity suite, iWork might be a bargain for you.
There are many situations where buying both Office and iWork is the right choice. If you're not sure what you will do with either one, save your money and use TextEdit. If your needs are very specific, there are many third-party apps that may suit you better than either iWork or Office. If you describe your needs, there are many users here who will be eager to offer specific suggestions.
Jerry
Similar Messages
-
What's the difference between redundancy and recovery window for retention?
Hello all,
I'm still trying to get a grip on this concept for RMAN backup planning.
I recently ran into a situation as follows.
I have the backups set to a redundancy of 1.
I have instance1, which had GRID jobs to run RMAN backups as follows
Incremental database level=0 weekly at Wed at 2:30am
I have daily backups, incremental level=1 each evening
I have archive log backups through the day.
What happened, was that apparently on a Tues some time, the development team deleted data from almost every table in their schema.
The didn't discover this till midday or so on Wednesday.
I went to try to restore...and RMAN couldn't do it. I had found a SCN for early the Tues they did it...but I got the following error:
RMAN> RUN
2> {
3> SET UNTIL SCN 4590383198282;
4> RESTORE DATABASE;
5> RECOVER DATABASE;
6> }
executing command: SET until clause
Starting restore at 28-APR-10
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=639 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: NMO v4.5.0.0
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=638 device type=DISK
creating datafile file number=1 name=+DATADG/instance1/datafile/system.284.697137287
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/28/2010 15:53:00
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
From what research I did...it appears that since I did not have a level=0 incremental from before, it could not reset the database back in time. The previous one had been deleted since, I guess I had a redundancy of 1.
So, I thought I had a week backup they way I have it set..but that assumes that errors are found pretty quickly before the next level=0 backup.
I want at least 1 to 1.5 weeks worth of backups. I do have the problem that we do not have many tapes in rotation, so I cannot go for too long...may 2x weeks tops.
I'm trying to rethink my strategy, but I'm confused as I read as to the difference between setting RMAN retention with redundancy vs recovery window.
Can someone give me an explanation how you understand it? I'm reading on the web and in oracle books, and for some reason, it just isn't clear to me what is the best way to go....especially when I see that redundancy and recovery window might both be set??
Thank you in advance,
cayenneDear Cayenne
AFAIK RMAN doesn't claim that "you haven't enough backup". Please read the error you got carefully
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
and check the following link:
ORA-01180: Cannot create datafile 1 when doing RMAN restore onto 2nd server
Moreover, could you please use LIST BACKUP command and see whether you have enough backups?
Read "Redundancy Based Backup Retention Policy" from the following link:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/strategy003.htm#sthref139 -
What's the difference between text and value type for SO item category?
Dears,
Could anybody help me on this question?
Many thanks!
Regards,
ShiliangHi Shiliang,
In a Bill Of Material the main item is a composite item which represents what is being sold to the customer. For eg. a computer typically would consist of Monitor, Keyboard,mouse and CPU, speakers. Here computer refers the collection of all these items which are physically existing and basically items present in our inventory ( Value Items ). Where as computer is just a text item meant to describe the collection.
Also to add the for Usage we use it as text sometimes, which is used to say the item has been authenticated by the quality dept and we print " Tested " on it or these days all the items come out with unique article numbers for identification purpose. So we use this usage as text.
Hope it adds. Pl reward if useful.
Thanks & Regards
Sadhu Kishore -
What is the difference between #variable_name and :variable_name?
Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AMQuestion is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM -
What is the difference between start() and run()
Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnxwhat is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in. -
What is the difference between exists and in
hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
ThanksYou get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query. -
1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months. -
What's the difference between thunderbolt and mini displayport?
I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt... -
What is the difference between, DSO and DTP in BI 7.0
Hi Guru's
what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
points will be assined?
Thanks & Regards,
Reddy.Hi,
The data will be replicated in the same way as we do in 3.5.
Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
blogs:
/people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
Re: How to identify Header, Item and Schedule item level data sources?
For Transformations in BI:
http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
For DTP:
DTP:
http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
For DSO:
Data Store Objects:
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Reg
Pra -
What is the difference between ojvm and client versions?
Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE 9.0.3.10.35
UML Modelers Version 9.0.3.9.4
Business Components Version 9.0.3.10.7
java.version 1.3.1_02
java.vm.name OJVM Client VM
java.vm.version 9.0.3.738 oHowever, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.
-
What is the difference between TO_CHAR and TO_DATE()?
Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
'2','02', '3','03', '4','04', '5','05',
'6','06', '7','07', '8','08', '9','09',
'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
DECODE(TO_CHAR(SYSDATE, 'MM'),
'01', '1',
'02', '2',
'03', '3',
'04', '4',
'05', '5',
'06', '6',
'07', '7',
'08', '8',
'09', '9',
'10', 'A',
'11', 'B',
'12', 'C') as code
from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM -
What is the difference between upgradation and migration.
Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathiHi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK -
What is the difference between ws_upload and gui_upload
what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell brieflyHi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards -
What is the difference between count(*) and count(1)
what is the difference between count(*) and count(1)
Hi,
903830 wrote:
some say count(1) is faster and some say count(*), i am confused about count function?In the link provided by Prakash :
prakash wrote:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1156159920245
You can read :
Followup August 31, 2001 :
I'll have to guess, since you don't say, that you are using 7.x and before when count(*) and count(1) were different (and count(1) was slower). In all releases of the databases for the last 4-5 years, they are the same.
Don't waste your time on that.
;-) -
What is the difference between mc947ll and MD301LL
What is the difference between these 2 part numbers for the iPad2 Leather case
MD301LL appears to be offered on Apple store while MC947LL is a 3rd party offering
but I dont see a difference in specs but the MC947LL is offered for a lower price
RobHSRP Versus VRRP Comparison Table
HSRP
VRRP
Propietary
Standards based
RFC 2281
RFC 3768
Separate IP Address needed for the Virtual
Can use the physical IP Address of the Virtual, if needed, saving IP space.
One Master, One Standby, all others are listening
One Master, all other routers are backup
More familiar to most network engineers
Less familiar - yet very similar
Can track an interface for failover
Can track an interface for failover (depending on operating system and version, it can also track the reachability of an IP address)
All HSRP routers use multicast hello packets to 224.0.0.2 (all routers) for version 1 or 224.0.0.102 for version 2.
All VRRP routers use IP protcol number 112 (vrrp) to communicate via multicast IP address 224.0.0.18
All virtual router must use MAC address 0000.0c07.acXX where XX is the group ID.
All virtual routers must use 00-00-5E-00-01-XX as its Media Access Control (MAC) address
Maybe you are looking for
-
IMovie and Final Cut Pro unexpectedly when importing 720p MPEG files
I'm running iMovie/FinalCutPro on Yosemite. Every time I try and import a 720p MP4 with 60FPS both programs quit unexpectedly while generating the thumbnails. The files I am using have run/imported without any problems into Quicktime, VLC, Adobe Prem
-
XP Errors on Startup (Checking Filesystem lags startup)
Bootcamp 2.1 Windows XP Service Pack 2 Windows runs fine, boots fine. Usually.. When I switch from 10.5 over to XP before it boots into XP it gives me an error screen saying it has to check my File System. Every time. "Checking File System on C: Type
-
ADF Faces: non-modal popup windows
Hi, when using the dialog functionality on commandXXX components the dialog always opens in a modal mode. My requirements are to let the user open as many popups as someone likes from the same page. Is it possible to achieve this behaviour without ma
-
Is there a way to recover files deleted via rsync?
I ran rsync to back up my files to an external drive, but I made an error and wiped out some stuff I'd like back from the external. To be specific, I synced a desktop folder to the root folder of the external HD, wiping out its contents. I do have a
-
I have not deleted anything... I've used the applications install dvd... I've tried following along with previous conversations BUT nothing seems to be working.. can someone please help me? Oh! And since this has been not working... my iphoto won't l