What is the difference between pause and save in Hyper-V?

hi,
What is the difference between pause and save in Hyper-V?
What are the benefits of using each function?
Thanks

WHen you save VM, Hyper-V saves VM state to disk and frees all memory and CPU resources used by VM. When you pause a VM, Hyper-V saves VM cpu state in memory, and then stops VM's cpu processes without releasing its memory. Since no disk operations are involved,
pausing and resuming can be done much faster than saving and restoring a VM.
Gleb.

Similar Messages

FV70 what is the difference between Park and Save as completed?

HI,
Can anyone explain, what is the differences between Park and Save as completed in t-code FV70?
in FBV0 post park document, I still can post both document?
Thanks

Hi,
The main difference between park and save as completed is that in "Save as Completed", system do some checks as it do in posting the ocuments, like:-
(1) Balance should be zero.
(2) All lines should have been filled with the required data.
(3) There should be at least two lines in the document.
Regards,
Gaurav

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What's the difference between Acrobat and Livecycle?

I'm creating forms for a very large company.
What's the difference between Livecycle and Acrobat?
I have been creating them in Livecyle - they need to be filled out and emailed (not just the data, the completed form).
Can I create it in Livecycle and save it as Acrobat?
Can it be edited in Acrobat after it's created?

acrobat.exe is part of Adobe Acrobat and acrord32.exe is part of Adobe Reader.

What is the difference between ABAP and HR-ABAP?

Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.V

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif.

What are the differences between inactive and active ABAP objects?

Can anybody tell me what are the differences between inactive and active ABAP objects?
In my opinion, an active object is compiled and system wide available, that means the system do not have to compile the program again before run or use the object. While An inactive object is not system wide available and every time you run an inactive object, firstly the abap runtime will have to generate a tempory runtime object and this inactive object can not seen by others.
Am I right? Can anybody kindly tell me other differences?

Hi,
"When it is inactive, it is like it would not exist at all:" no - it's like it only exists to you
"If we just saved that one means it is stored in application server not in database": no - the inactive version is also stored in the database. You can log off and log on and it will still be there, in its inactive status.
"Only active objects can be executed.": no - inactive objects can be executed by you
When you create or modify a program, it is inactive until you activate it.
With a change, there are two versions of the program stored in the database - the active version (as it was before you made your change), and the inactive version. If you attempt to run the program, you'll run the inactive version - the one with your changes. Everyone else on the system will run the active version.
In this way, you can make changes without affecting anyone else.
Once you activate your program, then the inactive version becomes the active version.
With a create, there is no active version, until you hit the activate button. This means ONLY you can run the program.
An additional benefit of this model, is that if you make a change, save it, and then change your mind without activating, you can recover the active version into the editor, using version management.
A downside is that sometimes you have to activate your change before you can test it, if it interacts with other, active, programs.
Regards,
Kumar

What is the difference between jdk and jre

what is the difference between jdk and jre
plzz tell me in detail

It's an extremely important skill to learn how to search the web. Not only will it increase your research and development talents, it will also save you from asking questions that have already been answered numerous times before. By doing a little research before you ask a question, you'll show that you're willing to work and learn without needing to have your hand held the entire time; a quality that is seemingly rare but much appreciated by the volunteers who are willing to help you.
If you've done the research, found nothing useful, and decide to post your question, it's a great idea to tell us that you've already searched (and what methodologies you used to do your research). That way, we don't refer you back to something you've already seen.
To get you started, here is an excellent resource: The Java� Glossary

What is the difference between reset and adobe reset??

what is the difference between reset and adobe reset??

Reset and Reset (Adobe) will have the same effect unless you have changed the defaults.
For raw files LR uses its own defaults as the starting point for developing an image. For example, if you don’t apply your own import preset the standard default settings under detail are:
Sharpening:
Amount 25
Radius 1.0
Detail 25
Masking 0
Some users like to adjust these and make the tweaked settings into their own defaults. After making the desired adjustments in Develop simply hold down Alt and the reset button changes to Set Default.
Clicking the button will save the new default settings. This can be useful if you have more than one camera and wish to use different defaults for each.
To get back to the standard defaults simply hold down shift and click Reset (Adobe)
Restore
You can also restore the default settings globally in the develop module from the top menu:
Develop >> Set Default Settings
Then click the button "Restore Adobe Default Settings"
The standard defaults will then apply again to all future imports. For photos already in the catlaog where a non-standard default has already been applied you would need to adjust them manually using Shift+Reset (Adobe) but after adjusting one, it is then possible to sync all the others.

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What is the difference between exists and in

hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
Thanks

You get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query.

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC? 2) What is the difference between 6 and CC vercion? 3) When I used lightromm 3, I could see inEXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is ve

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What's the difference between thunderbolt and mini displayport?

I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks

@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt...

What is the difference between, DSO and DTP in BI 7.0

Hi Guru's
what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
points will be assined?
Thanks & Regards,
Reddy.

Hi,
The data will be replicated in the same way as we do in 3.5.
Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
blogs:
/people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
Re: How to identify Header, Item and Schedule item level data sources?
For Transformations in BI:
http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
For DTP:
DTP:
http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
For DSO:
Data Store Objects:
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Reg
Pra

What is the difference between ojvm and client versions?

Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm      RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE     9.0.3.10.35
UML Modelers Version     9.0.3.9.4
Business Components Version     9.0.3.10.7
java.version     1.3.1_02
java.vm.name     OJVM Client VM
java.vm.version     9.0.3.738 o

However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

What is the difference between pause and save in Hyper-V?

Similar Messages

Maybe you are looking for