What is the difference between personnel development and performance management

Hi,
What is the difference between personnel development and performance management in terms of configuration and in portal level .
Thanks
Srikant

HI Srikant,
Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
hope this will help you.
regards,
DInesh

Similar Messages

What is the difference between Personnel Administrator and Line Manager?

I understand that Personnel Administrator is responsible for all the master data in Personnel Administration. Who is Line Manager in Recruitment? While administering the vacancies, what is the difference between both of them in Recruitment.
Points assured.

Hi Nivedita,
A line manager may be a chief position in OM Structure.
A person who holds a managerial position in a company or department and who makes decisions in an area of responsibility.
Line managers can act as the first person responsible for applicant correspondence.
In the Recruitment workflow, tasks requiring a decision are sent to line managers.
Regards,
Kapil

What is the difference between Serial numbers and Batch management.

Hi Gurus,
Can anyone explain the difference between Serial Number and Batch Management in breif.
Regards
Ravi

Hi,
Serial number management and batch management are different functions that can be
used in conjunction with each other.
A batch represents a non-reproducible subset
of the total quantity of a material held in stock, which is managed separately from
other subsets of the same material.
For Example Different production lots
(for example, paints, wallpapers, pharmaceutical products), delivery lots or quality
grades of a material.
whereas a serial number is a number that you give to an individual item of material in addition
to the material number, in order to differentiate between this individual piece and all
other items of the material. The combination of material number and serial number
is unique. It is not necessary to use the batch management function to use serial
number management.
Regards
VIjay.

What's the difference between Screen Sharing and Remote Management?

As the title asks. What is the difference between the two?
Because heres the thing. I set Screen Sharing on in Sharing. Then a few days later I will go back to the Sharing preferences and instead of Screen Sharing being checked. Remote Management is now checked, not Screen Sharing. What's the deal? Is that normal?
I was wondering if it was because I log into my iMac sometimes using my iPhone with that Mocha VNC program. Its the only program I use to remotely control my computer. Is that it?
Any help I can get is appreciated! Thanks!

Remote Management provides support for the additional functionality of Apple Remote Desktop as compared to a standard VNC setup. The options are otherwise identical.
(35284)

What is the difference between LR Develop and Camera Raw?

I am new to LR, but have been using PS for some time. My old work flow was to shoot in RAW transfer to my computer HD then process first in Camera Raw and do final adjustments in PS, then save back to the computer HD.
So far I like LR, which came as a bundle with my subscription to PS CC. But I'm confused about LR's proper place in the workflow.
So a few questions.
Is LR Develop the equivalent of Camera Raw? If it is then can it substitute Camera Raw?
If not then should I process first in LR Develop before going to Camera Raw? I like being able to apply adjustments to multiple photos in a shoot, but I still want the power of Camera Raw for some things, unless LR Develop does that better.
So I'm wondering what the best work flow is.
Is it Shoot>LR>Develop>Camera Raw>PS>Save back to LR.
Or is it Shoot>LR>Camera Raw>LR Develop>PS>Save back to LR. (This one seems very difficult)
Hoping to end my confusion,
Bob Gall

Is LR Develop the equivalent of Camera Raw?
The image processing algorithms are identical.
If it is then can it substitute Camera Raw?
Yes, if you are going to use LR
So I'm wondering what the best work flow is.
Do as much development work as possible in Lightroom. Only if you need additional editing power (that Lightroom doesn't have) would you choose to send the photo to Photoshop. In this case, you would use the Lightroom command: right-cilck on the photo and choose Edit In... https://helpx.adobe.com/lightroom/help/open-lightroom-photos-external-applications.html#op en_photos_in_photoshop
This sends a copy of your edited image to Photoshop for whatever you want to do there. Once completed in Photoshop, you would do a SAVE (not Save As) in Photoshop for Lightroom to recognize the edits done in Photoshop.
You may (or may not) find that certain photos don't even need Photoshop.
Camera Raw is not needed in this workflow.

What is the difference between XI architect and Xi developer

Dear Friends
Would you like to answer me on What is the difference between XI architect and Xi developer?
thanking you
regards
Naim

Hi,
>>>>XI architect
he/she knows/understands how XI works
in all aspects so can model efficient flows
via XI
he doesn't even have to do anything in XI
(except the specification for developer)
as he already did it in many projects
and he knows that it's working like he says...
>>>Xi developer?
it can be any person how knows a little
bit of XI (just to create XI's objects)
and nothing more
Regards,
micha

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
Thanks

Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
If you are a developer, you can do that with a command you can type into Terminal:
sudo purge

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

What is the difference between partner function and partner type

Hi Gurus,
What is the difference between partner function and partner type?
Thanks,
Paul

Hi John,
The partner types allow us to distinguish between different business partners such as customer, vendor, employee etc and the partner functions represent the functionality or role each partner plays within the business transaction.
For example under the partner type Customer, you will find - Sold to party, Ship to party, Bill to party, Payer.
The business partners that exist in the market place are represented with a partner type in the R/3 system. Examples of business partners are customer, vendor, employee and contact person.
The following partner types are defined in the partner processing for the sales & distribution module
a.     AP contact person (06)
b.     KU customer (07)
c.     LI vendor (08)
d.     PE employee/personnel (09)
Assigning the partner functions in the SAP system determines the functions of particular partner in the sales process. One partner may take on several functions also.
REWARD POINTS IF HELPFUL
Regards
Sai

What is the difference between (SEPA Structured) and (SEPA Unstructured)?

Hi,
Could you please teach me about "Format Payments (SEPA Structured)"
and "Format Payments (SEPA Unstructured)"?
1.What is Format Payments (SEPA Structured)?
Is (SEPA Structured) used with which case?
2.What is Format Payments (SEPA Unstructured)?
Is (SEPA Unstructured) used with which case?
3.What is the difference between (SEPA Structured) and (SEPA Unstructured)?
The customer is checking Note.791226.1.
However, he says that he cannot understand these two differences.
Please teach me.
Thanks.

From the European Payments Council website:
Remittance information: structure the unstructured
The SEPA Credit Transfer Scheme permits the end-to-end carrying of remittance data on a structured or unstructured basis appropriate to the nature of the payment (the remittance information usually contains details of the contract underlying the transaction such as an invoice number, for example). The length of the remittance information in the SCT Scheme is fixed at a standard length of 140 characters and banks are obliged to pass on the full remittance information.
The EPC supports a proposal developed by the European Association of Corporate Treasurers (EACT), which allows companies to agree on a structure for the remittance information. The EACT suggestion on how to structure the "unstructured" remittance fields allows companies exchanging a credit transfer to agree, among other, on information to be transmitted in a specific manner. Banks will carry remittance information structured in such an agreed way unaltered throughout the process chain.

(261680070) Q WWO-13 What are the difference between WLS6.1 and WLS7.0 web services?

Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

What's the difference between SharePoint 2013 and Office 365 Team Sites?

Hi there,
What are the differences between SharePoint 2013 and Office 365 Team Sites?
If I would like to develop a professional corporate website with SharePoint technology (because the company allready uses Office 365), do you recommend using SharePoint 2013 (in the cloud) or Office 365 Team Sites? And why?
Thank you very much!

You cannot make SPO Team Sites anonymous-enabled, therefor they're a moot point for a public website.
While slightly out of date, take a look at this:
http://nikpatel.net/2013/01/17/new-sharepoint-2013-wcm-features-are-not-available-in-sharepoint-online-2013/
http://technet.microsoft.com/en-us/library/sharepoint-online-content-service-description.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between personnel development and performance management

Similar Messages

Maybe you are looking for