What is the difference between: "Place..." or "Add files for Upload..."?

Where can I get information about the detailed differences between the commands "Place..." and "Add Files for Upload..." of the Files menu?
Understand that in both cases the files are linked and not embedded. But what further differences are there?
I came across this issue because widget 039 (Animated Image Rollovers) from MuseThemes works only if you use the "Add Files for Upload..." option.
Thanks,
Daniel

Hi Daniel,
There are a few differences in both the options-
Place is used to add content to page (rendered) while Add Files for Upload... is used to upload files to your site but not on page (not rendered).
Placed images are published to /images folder on the server while images added using Add Files for Upload... option are published to the /assets folder on the server.
Placed images have a chance of getting renamed (if resized/interpolated in Muse) upon publish while images added using Add Files for Upload... retain their names.
Place can be used to add limited file formats like jpg/png/psd/swf/oam etc while you can upload almost any type of file using Add Files for Upload...
You don't see Placed content in the Hyperlinks dropdown for linking while files added using Add Files for Upload... show up in the Hyperlinks dropdown so that you may link to them and allow download.
Both serve different purposes and Add Files for Upload... is preferred by Widget Developers because it gives more control over uploaded content and assurance that file location and name will be as expected.
Hope the above give you clarity on the basic difference.
Cheers,
Vikas

Similar Messages

What's the difference between redundancy and recovery window for retention?

Hello all,
I'm still trying to get a grip on this concept for RMAN backup planning.
I recently ran into a situation as follows.
I have the backups set to a redundancy of 1.
I have instance1, which had GRID jobs to run RMAN backups as follows
Incremental database level=0 weekly at Wed at 2:30am
I have daily backups, incremental level=1 each evening
I have archive log backups through the day.
What happened, was that apparently on a Tues some time, the development team deleted data from almost every table in their schema.
The didn't discover this till midday or so on Wednesday.
I went to try to restore...and RMAN couldn't do it. I had found a SCN for early the Tues they did it...but I got the following error:
RMAN> RUN
2> {
3> SET UNTIL SCN 4590383198282;
4> RESTORE DATABASE;
5> RECOVER DATABASE;
6> }
executing command: SET until clause
Starting restore at 28-APR-10
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=639 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: NMO v4.5.0.0
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=638 device type=DISK
creating datafile file number=1 name=+DATADG/instance1/datafile/system.284.697137287
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/28/2010 15:53:00
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
From what research I did...it appears that since I did not have a level=0 incremental from before, it could not reset the database back in time. The previous one had been deleted since, I guess I had a redundancy of 1.
So, I thought I had a week backup they way I have it set..but that assumes that errors are found pretty quickly before the next level=0 backup.
I want at least 1 to 1.5 weeks worth of backups. I do have the problem that we do not have many tapes in rotation, so I cannot go for too long...may 2x weeks tops.
I'm trying to rethink my strategy, but I'm confused as I read as to the difference between setting RMAN retention with redundancy vs recovery window.
Can someone give me an explanation how you understand it? I'm reading on the web and in oracle books, and for some reason, it just isn't clear to me what is the best way to go....especially when I see that redundancy and recovery window might both be set??
Thank you in advance,
cayenne

Dear Cayenne
AFAIK RMAN doesn't claim that "you haven't enough backup". Please read the error you got carefully
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
and check the following link:
ORA-01180: Cannot create datafile 1 when doing RMAN restore onto 2nd server
Moreover, could you please use LIST BACKUP command and see whether you have enough backups?
Read "Redundancy Based Backup Retention Policy" from the following link:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/strategy003.htm#sthref139

What's the difference between text and value type for SO item category?

Dears,
Could anybody help me on this question?
Many thanks!
Regards,
Shiliang

Hi Shiliang,
In a Bill Of Material the main item is a composite item which represents what is being sold to the customer. For eg. a computer typically would consist of Monitor, Keyboard,mouse and CPU, speakers. Here computer refers the collection of all these items which are physically existing and basically items present in our inventory ( Value Items ). Where as computer is just a text item meant to describe the collection.
Also to add the for Usage we use it as text sometimes, which is used to say the item has been authenticated by the quality dept and we print " Tested " on it or these days all the items come out with unique article numbers for identification purpose. So we use this usage as text.
Hope it adds. Pl reward if useful.
Thanks & Regards
Sadhu Kishore

What is the difference between iwork and microsoft office for mac?

I was wondering which one is worth the money.

+I was wondering which one is worth the money.+
It depends on why you want iWork or Office. If you work in a group where Office is the main collaboration app, you need it and it's worth it. If you work independently and don't plan to do much collaboration with Office users, but you still need a nice productivity suite, iWork might be a bargain for you.
There are many situations where buying both Office and iWork is the right choice. If you're not sure what you will do with either one, save your money and use TextEdit. If your needs are very specific, there are many third-party apps that may suit you better than either iWork or Office. If you describe your needs, there are many users here who will be eager to offer specific suggestions.
Jerry

What is the difference between mc947ll and MD301LL

What is the difference between these 2 part numbers for the iPad2 Leather case
MD301LL appears to be offered on Apple store while MC947LL is a 3rd party offering
but I dont see a difference in specs but the MC947LL is offered for a lower price
Rob

HSRP Versus VRRP Comparison Table
HSRP
VRRP
Propietary
Standards based
RFC 2281
RFC 3768
Separate IP Address needed for the Virtual
Can use the physical IP Address of the Virtual, if needed, saving IP space.
One Master, One Standby, all others are listening
One Master, all other routers are backup
More familiar to most network engineers
Less familiar - yet very similar
Can track an interface for failover
Can track an interface for failover (depending on operating system and version, it can also track the reachability of an IP address)
All HSRP routers use multicast hello packets to 224.0.0.2 (all routers) for version 1 or 224.0.0.102 for version 2.
All VRRP routers use IP protcol number 112 (vrrp) to communicate via multicast IP address 224.0.0.18
All virtual router must use MAC address 0000.0c07.acXX where XX is the group ID.
All virtual routers must use 00-00-5E-00-01-XX as its Media Access Control (MAC) address

What is the difference between scripts ans smart forms

what is the difference between scripts ans smart forms

hi
for smartforms...some links
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
SmartForms : some links
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://help.sap.com/saphelp_46c/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
http://www.sap-img.com/smartforms/smart-001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sap-img.com/smartforms/smart-002.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.erpgenie.com/abap/smartforms.htm
for scripts..
Good ...Check out the following links - important
SAP Scripts
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2969311
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2902391
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3205653
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3111402
http://www.sap-img.com/sapscripts.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://www.sap-basis-abap.com/sapabap01.htm
http://www.sap-img.com/sapscripts.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci943419,00.html
http://sap.ittoolbox.com/topics/t.asp?t=303&p=452&h2=452&h1=303
http://www.sapgenie.com/phpBB2/viewtopic.php?t=14007&sid=09eec5147a0dbeee1b5edd21af8ebc6a
Other Links
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
drawing lins, boxes and shadings
http://help.sap.com/saphelp_46c/helpdata/en/d1/802ec5454211d189710000e8322d00/frameset.htm
How to create Box in scripts
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
http://www.allsaplinks.com/dialog_programming.html
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://www.geocities.com/ZSAPcHAT
http://www.geekinterview.com/question_details/37873
http://www.allinterview.com/showanswers/23627.html
http://abapprogramming.blogspot.com/2008/03/sap-smart-forms-brief-discussion.html
https://www.sdn.sap.com/irj/sdn/forums
http://saplab.blogspot.com
http://www.****************/Tutorials/Smartforms/SFMain.htm............
regards

What is the difference between add ons/boosters?

what is the difference between add ons/boosters?

Hi ,
Welcome to the community. Thanks for joining.
Great question here is the answer.
Add on - this can be an inclusive add on from your price plan, example music add on or games.
Inclusive add on information can be found on the EE help pages. (Page size to download 11.72kb)
Or can be a bundle purchased on a monthly basis for things like extra data or calling abroad.
Add on information can be found on the EE help pages. (Page size to download 11.22kb)
Booster - This is T-Mobile service for pay as you go, this is a chargeable bundle such as extra data or texts.
Booster information can be found on the T-Mobile help pages. (Page size to download 11.31kb)
Anything else please come back

What is the difference between /assets/account/import and /data/account ?

Does anybody knows what is the use of /assets/account/import and /data/account.
What is the difference between these two and their functional use.
thanks

/assets/account/import is used in the context of performing account file uploads through the E10 UI. If you navigate to Contacts > Accounts > and click Upload in the top right corner (above search), you'll get the upload wizard:
The moment you click the cloud icon and select a file, two actions take place:
1) POST to /assets/account/import is made, where you are passing the name, import source and purpose of the import. The response includes the id of the new import object you created
2) Another POST to /assets/account/import/{id}/csv is made, which includes the data in your chosen file
Afterwards, you perform the mappings and go to step 4 of the wizard. When you click Finish, another two actions take place:
1) PUT /assets/account/import/{id} to update the import definition with your mappings from Step 3
2) POST to /assets/account/import/{id}/queue to send this import into the import/upload queue. At this point it becomes visible from Setup > Integration > Inbound > Reporting > Upload History
Note that this workflow is not meant for client use, but rather helps facilitate UI functionality for marketing users. You should be using Bulk API to add or update records, which also confers other advantages such as the ability to use syncActions. The only functionality not available in Bulk API which is available through this workflow is the ability to delete Accounts. For obvious reasons, its recommend that you do NOT automate the deletion of any records. Accounts especially are not subject to any band limits or rates, so its best to have Marketers remove them as needed.
Regarding the second part of your question, the /data/accounts endpoint will provide you with up to 1000 account records when using GET. A POST can also be made to create a new account record (company) within Eloqua. Otherwise, GET /data/account/{id} will retrieve the details of a particular record and PUT /data/account{id} will update a particular.
Best regards,
Bojan

What is the difference between customer exits and user exits?

hello friends,
what is the difference between customer exits and user exits?

Hi
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.     *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
    CASE okcode.
        WHEN 'BACK OR EXIT'.
            CASE sy-dynnr.
                    WHEN '100'.
                         SET SCREEN 0.
                         LEAVE SCREEN.
                    WHEN '200'.
                         SET SCREEN 100.
                         LEAVE SCREEN.
             ENDCASE.
      ENDCASE.

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

WHAT'S THE DIFFERENCE BETWEEN.....

Hi friends,
Please enlighten me ....
What's the difference between using this.....
1. Add User command functionality to ALVgrid report
In order to add user command functionality to the ALV grid you need to perform the following steps:
                    1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include 'USER_COMMAND' FORM
                2. Create 'USER_COMMAND' FORM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_callback_user_command = 'USER_COMMAND'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
and using this----
2. Add User command functionality to ALVgrid report
In order modify PF_STATUS of ALV grid report you need to perform the following steps:
     1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include:
                    i_callback_pf_status_set = 'SET_PF_STATUS' statement.
     2. Create 'SET_PF_STATUS' FORM
     3. Create pf_status (i.e. 'ZNEWSTATUS').
          - It is recommend that you copy standard status'STANDARD' from function group SALV
            and modify it accordingly. ALV standard function codes always start with '&'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_pf_status_set = 'SET_PF_STATUS'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM SET_PF_STATUS                                         *
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZNEWSTATUS'.
                  "Copy of 'STANDARD' pf_status from fgroup SALV
ENDFORM.
I have assumed the former is used when I am selecting a field on the list
and the later when I have created a pf-status. I mean to say... I have slected a field and click on some button to get further information.
Please remove my confusion.
Thanking you alll in advance,
Hari Kiran.

From their Terms & Conditions page:
Grade A - Working phone in as new/mint condition. Complete with original box and accessories as sold new.
Grade B (and Discounted) - Working phone in good condition with slight cosmetic blemishes. Charger supplied. If the phone includes a music player/radio then it is supplied with headphones. If the phone has PDA functionality a sync cable and/or docking cradle is supplied. Missing original packaging.
Grade C (and Budget) - Working phone in poor cosmetic condition. Original or 3rd party charger supplied but missing accessories and original packaging.
Substitute iPod for phone and I think it makes sense...
tt2

What is the difference between Firefox 7.0.1 and Firefox Desktop? I like what I see in Desktop. How do I get it.

How do I go about getting Firefox Desktop. I have Firefox 7.0.1 now as my browser. Do I have to download Desktop or do an add-on?

1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months.

What is the difference between iterator.remove() ArrayList.remove()?

Following code uses iterator.remove() ArrayList.remove().
public class CollectionRemove
    private static void checkIteratorRemove()
         List<String> list = new ArrayList<String>();
          list.add("1");
          list.add("2");
          list.add("3");
         System.out.println("in checkWithIterator*************");
        Iterator<String> iter = list.iterator();
        while (iter.hasNext()) {
            String str = iter.next();
            if (str.equals("2")) {
                iter.remove();
            System.out.println("list Size: " + list.size() + " Element: " + str);
    private static void checkListRemove()
         List<String> list = new ArrayList<String>();
          list.add("1");
          list.add("2");
          list.add("3");
        System.out.println("in ncheckWithForLoop*************");
        Iterator<String> iter = list.iterator();
        while (iter.hasNext())
             String str = (String) iter.next();
            if (str.equals("2")) {
                list.remove(str);
            System.out.println("list Size: " + list.size() + " Element: " + str);
    public static void main(String args[])
         checkIteratorRemove();
         checkListRemove();
output is :
in checkWithIterator*************
list Size: 3 Element: 1
list Size: 2 Element: 2
list Size: 2 Element: 3
in ncheckWithForLoop*************
list Size: 3 Element: 1
list Size: 2 Element: 2Why is this difference ? what is the difference between iterator.remove() ArrayList.remove()?

In the case of Fail-fast iterator, if a thread modifies a collection directly while iterating over it, the iterator will thow ConcurrentModificationException . Say,
for (Iterator it = collection.iterator(); it.hasNext()) {
    Object object = it.next();
    if (isConditionTrue) {
        // collection.remove(object); can throw ConcurrentModificationException
        it.remove(object);
}As per specs,
Note that this exception does not always indicate that an object has been concurrently modified by a different thread. If a single thread issues a sequence of method invocations that violates the contract of an object, the object may throw this exception. For example, if a thread modifies a collection directly while it is iterating over the collection with a fail-fast iterator, the iterator will thow this exception.

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What is the difference between: "Place..." or "Add files for Upload..."?

Similar Messages

Maybe you are looking for