What is the difference between save as: Page Source & Web Archive.

Hello,
what is the difference between save as: Page Source & Web Archive.
I want to save web pages permanently regardless if the website itself remains permanent.
What does a Page Source save and what does a Web Archive save.
Which would be best for my intentions?
Thanks.

What does a Page Source save
Only the HTML code of the page you're looking at.
what does a Web Archive save.
The HTML source plus all objects such as images the source references. You may want to use the print to PDF feature.
(56401)

Similar Messages

What Is The Difference Between Save As Self-Contained Movie and Exporting

What Is The Difference Between Save As Self-Contained Movie and Exporting a Video as a Quicktime File

Save As places the file inside a .mov container. No re-encoding.
Your still have the option to save this file as "self-contained" (all the parts travel with the file) or "reference" (small file sized movie that merely "points" to the movie parts).
A reference movie can't play if the source files can't be found. If they are moved or deleted the reference movie will fail and it can't be re-created.
Exporting is done to convert one QuickTime format to another. Typically you do this with a high quality source file. Exporting previously compressed files is a bad idea that leads to unpredictable results.
QuickTime doesn't open WMP formats without third party software help (Flip4Mac is one). You can't convert (export) WMP formats without paying extra fees to upgrade their software.

What is the difference between "Save image to downloads" and "save image to iPhoto library"???

Typically I have been saving my photos to the iphoto library. Im not sure which is the best option. What is the difference between these 2 options?

one goes to your downloads folder and the other goes to your iPhoto library.

Stupid PDF Question: What's the difference between "Save As PDF" and Printing to a PDF "printer"?

Is there a quality difference?
The "Save As" seems to run Distiller, but if I select "Print Document" and select "Adobe PDF" as the printer, it also seems to work OK, although I sometimes get a "Times" font not available, will be replaced by "Times New Roman", even though I can't find any reference to "times" in my book.
Is there an advantage to running Distiller?
Thanks!
John
www.controlgeek.net

> Is there a quality difference?
I'd expect them (as well as print-to-Ps & Distill) to be the same for the same settings.
We print to Ps & Distill, for several reasons, not all of which may apply to you:
More control. Distilling provides menus for everything Adobe lets you control in PDF gen. Print/SaveAs may not (and don't in our environment).
Faster printing (Frame doesn't have to wait for the tps to pdf gen). You can get back to work while a long job renders.
Unequal versions/different platforms. We author on FM8/Unix and Distill on Acro9/PC.
> ... although I sometimes get a "Times" font not available, will be replaced by "Times New Roman", even though I can't find any reference to "times" in my book.
Save the component files to MIF and examine with a plaintext editor. If not found, the font invocation is probably coming in with a text inset, or a graphic of type DWG, DXF, EPS, PDF or possibly SVG.

What's the difference between Save as Source or Quicktime Movie?

I'm watching some quicktime trailers that I'd like to save. There are 2 options to save the movie as a source of Quicktime Movie. They both save a quicktime, but I noticed that when saving as a quicktime movie, the file is a lot smaller. So what's different?

Save as "Source" keeps the file in its original container (.m4v, .mp4 etc.) and Save as Movie uses the .mov container.
Both versions are the same file size.

What is the difference between save and archive?

unable to find thread or answer to this question. "Save" vs. "Archive" obviously different from the file size but ho ware they different? thanks you.

never mind, figured it out, the hard way, when I deleted some files.

What is the difference between pause and save in Hyper-V?

hi,
What is the difference between pause and save in Hyper-V?
What are the benefits of using each function?
Thanks

WHen you save VM, Hyper-V saves VM state to disk and frees all memory and CPU resources used by VM. When you pause a VM, Hyper-V saves VM cpu state in memory, and then stops VM's cpu processes without releasing its memory. Since no disk operations are involved,
pausing and resuming can be done much faster than saving and restoring a VM.
Gleb.

FV70 what is the difference between Park and Save as completed?

HI,
Can anyone explain, what is the differences between Park and Save as completed in t-code FV70?
in FBV0 post park document, I still can post both document?
Thanks

Hi,
The main difference between park and save as completed is that in "Save as Completed", system do some checks as it do in posting the ocuments, like:-
(1) Balance should be zero.
(2) All lines should have been filled with the required data.
(3) There should be at least two lines in the document.
Regards,
Gaurav

What is the difference between pages/numbers/keynotes app vs iWork

What is the difference between pages/number/keynotes apps vs iworks?

baileys4 wrote:
What is the difference between pages/number/keynotes apps vs iworks?
iWork contains all 3 of those apps.

Whats's the difference between MacBook Pro 13 and 13.3 ?

This, Whats's the difference between MacBook Pro 13 and 13.3 ?

Firstly, you are not in MacBook Pro forum, so you need to get your bearings.
2nd check the specs page
http://www.apple.com/support/macbookpro
Then Bing/Google for reviews, Ars is always good but dozens have done one.
2011 brings Intel Sandy Bridge processor boards, Thunderbolt, SATA3 (6G) along with options for SSD and much more RAM (can save buying RAM and doing the upgrade yourself)

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

What is the difference between the passcode on my iPhone 5 and a password? I am locked out of my phone.

What is the difference between the passcode on my iPhone 5 and a password? I am locked out of my phone.

Not entirely sure what you are asking, but a passcode to unlock an iOS device is normally 4 digits long (so is a 4 digit code), though you can make it alphanumeric and longer (so effectively becomes a password).
If you don't know the passcode to unlock your phone or it's showing the disabled screen then there are instructions on this page for how to reset a device : http://support.apple.com/kb/HT1212 - you should then be able to restore/resync your content to it.

WHAT'S THE DIFFERENCE BETWEEN.....

Hi friends,
Please enlighten me ....
What's the difference between using this.....
1. Add User command functionality to ALVgrid report
In order to add user command functionality to the ALV grid you need to perform the following steps:
                    1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include 'USER_COMMAND' FORM
                2. Create 'USER_COMMAND' FORM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_callback_user_command = 'USER_COMMAND'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
and using this----
2. Add User command functionality to ALVgrid report
In order modify PF_STATUS of ALV grid report you need to perform the following steps:
     1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include:
                    i_callback_pf_status_set = 'SET_PF_STATUS' statement.
     2. Create 'SET_PF_STATUS' FORM
     3. Create pf_status (i.e. 'ZNEWSTATUS').
          - It is recommend that you copy standard status'STANDARD' from function group SALV
            and modify it accordingly. ALV standard function codes always start with '&'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_pf_status_set = 'SET_PF_STATUS'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM SET_PF_STATUS                                         *
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZNEWSTATUS'.
                  "Copy of 'STANDARD' pf_status from fgroup SALV
ENDFORM.
I have assumed the former is used when I am selecting a field on the list
and the later when I have created a pf-status. I mean to say... I have slected a field and click on some button to get further information.
Please remove my confusion.
Thanking you alll in advance,
Hari Kiran.

From their Terms & Conditions page:
Grade A - Working phone in as new/mint condition. Complete with original box and accessories as sold new.
Grade B (and Discounted) - Working phone in good condition with slight cosmetic blemishes. Charger supplied. If the phone includes a music player/radio then it is supplied with headphones. If the phone has PDA functionality a sync cable and/or docking cradle is supplied. Missing original packaging.
Grade C (and Budget) - Working phone in poor cosmetic condition. Original or 3rd party charger supplied but missing accessories and original packaging.
Substitute iPod for phone and I think it makes sense...
tt2

What is the difference between 'CRM_ORDER_SAVE' and 'CRM_ORDER_MAINTAIN'?

Hi Experts,
   What is the difference between these two FMs?
   'CRM_ORDER_SAVE' and 'CRM_ORDER_MAINTAIN'
   I want to change the user status of an order in CRM. I have seen several posts in the forum some of which advises to use CRM_ORDER_MAINTAIN' while others 'CRM_ORDER_SAVE'.
I am really confused. Which one is the correct FM? I could not find any documentation for these FMs.
Do we need to use both these FMs or only one of them?
What is the correct order to call this FM?
1. CRM_STATUS_CHANGE_EXTERN "Change the user status
2. Commit work
3. CRM_ORDER_INITIALIZE
4. CRM_ORDER_MAINTAIN
5. Commit work.
6. CRM_ORDER_SAVE
Also what is the meaning of Ref_kind field? When do we give 'A' and when do we give 'B'?
ls_status-ref_guid = i_crmd_orderadm_h-guid.
ls_status-ref_kind = 'A'.
ls_status-status = 'E0003'.
ls_status-activate = 'X'.
APPEND ls_status TO lt_status.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
IT_STATUS = lt_status
CHANGING
CT_INPUT_FIELDS = lt_input_fields
EXCEPTIONS
ERROR_OCCURRED = 1
DOCUMENT_LOCKED = 2
NO_CHANGE_ALLOWED = 3
NO_AUTHORITY = 4
OTHERS = 5.
Thanks
Gopal

First question:
- the purpose of 'CRM_ORDER_MAINTAIN' is to set values of the fields (for example set header data, items, pricing...)
- the purpose of 'CRM_ORDER_SAVE' is just to save objects (in this function you don't set data but just set which objects (guids) should be saved)
Second question:
- you can use only 'CRM_ORDER_MAINTAIN' if you execute function in runtime (change data on the transaction that is opened on the screen) and then you save the object manualy
- you need both functions if you execute function 'CRM_ORDER_MAINTAIN' in the background because this function doesn't perform the save functionality by itself
3rd question:
The correct order is
1. CRM_STATUS_CHANGE_EXTERN "Change the user status
6. CRM_ORDER_SAVE
You don't need fm 'CRM_ORDER_MAINTAIN', because CRM_STATUS_CHANGE_EXTERN calls at the end 'CRM_ORDER_MAINTAIN' by itself (it is a sort of subfunction of this function).
4th question:
With 'ref_kind' you set to which level are you refering (header or item). A is for header.
Regards.

What is the difference between save as: Page Source & Web Archive.

Similar Messages

Maybe you are looking for