What is the difference between WDS and Extending a network?
What is the difference between the two? Why choose one over the other?
Both the WDS and "Extend a wireless network setting will add more coverage area to a wireless network.
WDS must be used if any device on the network is an older "g" device. The downsides to WDS are that it drops the overall wireless speed down to "g" levels (even if there are other newer "n" routers on the network) and cuts the bandwidth capability of the network in half for each "remote" device that is added to the network. That's a really severe loss in performance.
"Extend a wireless network" is a newer technology that can be used only if all of the routers on the network are newer "n" capable devices. It allows full "n" speeds and imposes only a small bandwidth penalty on the network. Obviously, this is the setup to use if your devices will support the technology.
Message was edited by: Bob Timmons
Similar Messages
-
What's the difference between WDS and Extend Wireless Network?
Hi,
I have a situation where my main computer (Mac Pro) is wired to an Extreme (n), and I have an Express (n) in another room in the house to Bridge to other computers for better wireless reception.
The manuals say I should be connecting the wireless computer via WDS. The way I have it connected right now is as such.
Extreme:
Create a wireless network
Allow this network to be extended is checked
Express:
Extend a wireless network
Allow wireless clients is checked
Is the above method correct, or should I be setting the Extreme and Express via: Participate in a WDS network?
Any help would be appreciated.
Thanks!
Message was edited by: Imagine
Message was edited by: ImagineI am not an expert on wireless networks but here is what they do in a nut shell:
WDS is a network composed by access points that work together to expand your network without the need of "wired" connectivity. so one of the bases will be wired, the rest are not , they just relay info to other computers... good for small to medium size business / homes
EWN is a network composed of wired & wireless networks/access points that work together to expand your network. pretty much you could have 5+ bases plugged in to a LAN / WAN covering different areas of your company / home (long range for medium / big business / Bill Gate's home, etc.). -
What is the difference between Classic and Extended Withholding Tax
Hi,
Can some please tell me what is the difference between Classic Withholding and Extended Withholding Tax. How can I look at the Withholding Tax deducted from a particular invoice?
Number Guaranteed.
Thanks.Dear Prem,
Withholding tax is the basically a tax withheld during the Vendor payment. So when making the payment to vendor the amount will be deduct (i.e withheld tax)
from the invoice and paid. The customer is actually the tax to tax authorities.
you can visit for more info.
Withholding Tax
For the config steps you go to the IMG path FI > Financila accounting for the Global settings > Withholding Tax
Withholding tax configuration is done by FI person.
Hope this helps you
Prem -
Help me clarify: Difference between Joining and Extending Wireless Network
I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it? By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro. Odd thing is though when I initially used AirPort Utility to set up my AirPort Express, I went through all the options to get it configured to access my existing network and I checked option to allow internet access through ethernet. All is well, but then I still don't have access to the internet through the ethernet and I noticed that the setting is on Extended. Just curious why it would give me the option to use the ethernet, set it on extended and not even work.
I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it?
When "joining a network," the AirPort Express Base Station (AX) acts just like any other wireless client (laptop, desktop, printer, etc.) You would want to configure the AX to join a network when you only want to use it to share a USB printer and/or stream iTunes.
When "extending a network," the AX can perform as either a main, relay, or remote base station in a Wireless Distribution System (WDS). A WDS is primarily used to extend a network wirelessly.
By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro.
If the AX is configured as either a relay/remote base station in a WDS, you actually can use it's Ethernet port for Internet access. Of course, this relay/remote must be connected to a main base station, that itself, has Internet access. -
Whats the difference between implements and extends!??
Can an interface be extended or not??
If it can whats the difference between implements and extends??
Thank you!Code Sample:
interface a implements aa{This is illegal. An interface cannot implement another interface. It can only extend another interface.
interface a extends aa{That's the way to do it. As already said above:
An interface can only extend another interface.
A class can extend another class.
A class can implement zero or more interfaces.
So, "implements" is only used for classes that implement interfaces. For the rest, "extends" is used. -
What is the difference between start() and run()
Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnxwhat is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in. -
Hi guru's what is the difference between table and temlate in smartforms
hi guru's what is the difference between table and temlate in smartforms
Hi Vasu,
Template is used for proper allignment of data which table is used for displaying multiple data.
We can say Template is for static data and Table is for dynamic data.
Suppose we have a requirement in which we have to allign the customer address in such a way as shown below:-
Name- Vasu Company- WIPRO Location- Chennai
Desig- S/W Native - Mumbai
Then for proper allighnment we can create a template and split that into 3 columns and 2 rows and create text elements for each cell display a proper allighned data at the output.
When we include a template inside a loop it gives the same property as a table.
When we have mutiple data which is to be extended to the next page like when we display all employee details in a company we use table.
Table has 3 sections , HEADER, ITEM ,FOOTER
The header secntion will be executed once and it will loop at the item level. at the end footer will be executed.
Hope this gives u some idea..
<b>Please reward if useful</b>
Regards,
sunil kairam. -
What Is The Difference Between A Router Extender & A Bridge?
Since I was here, I just thought I'd ask what is the difference between a router extender like the RE 1000 and what is known as a bridge? Does one work better than the other? Is one better for one thing, like a wired DVD player, than the other?
The RE1000 can act as range extender as well as bridge where as the versatile Wireless Ethernet Bridge can make a wired Ethernet-enabled device a part of your wireless network.
If we talk abuot the functionality in the bridge mode, then in that case both will be same the only difference will be, WET610N will be getting DUAL frequency i.e. 2.4GHz and 5GHz from the wireless network if that is also a DUAL band. -
What is the difference between #variable_name and :variable_name?
Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AMQuestion is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM -
What is the difference between exists and in
hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
ThanksYou get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query. -
1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
2) What is the difference between 6 and CC version?
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?1)Now I use Lightrom 5.7 how to upgrade to 6 or CC?
Purchase the standalone upgrade from here: Products
Download CC version from here: Explore Adobe desktop apps | Adobe Creative Cloud
2) What is the difference between 6 and CC version?
See this comparison chart: Compare Lightroom versions | Adobe Photoshop Lightroom CC
3) When I used lightromm 3, I could see in EXIF the distance in meters till the object I took, in the later virsions that function disappeared, it is very sad I am stiil waiting and hope that it would be possibble in the new versions. Or this indication may possible by setting?
Rob Cole's ExifMeta plugin displays the Subject Distance field (and much more). Unfortunately, his Web site appears to be down again. He used to be very active here, but he hasn't posted in several months. -
What's the difference between thunderbolt and mini displayport?
I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable).
I was wondering what's the difference between Thunderbolt and mini displayport
Thanks@bontistic: it is not true that only the Macbook Air supports Thunderbolt. All models(!) support thunderbolt: also the Macbook Pro's and Mini's. Eg.: http://www.apple.com/nl/macbookpro/features.html#thunderbolt
My Macbook Pro from 2011 already supported Thunderbolt... -
What is the difference between, DSO and DTP in BI 7.0
Hi Guru's
what is the difference between, DSO and DTP in BI 7.0 , how it will come the data from r/3 to BI 7.0, can u discribe?
points will be assined?
Thanks & Regards,
Reddy.Hi,
The data will be replicated in the same way as we do in 3.5.
Activating, and Transporting the same DS in BW, and Replicating them in BW from R/3.
First you need to know Diff b/w 3.5 nd 7.0, for that check the below doc's:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
blogs:
/people/sap.user72/blog/2004/11/01/sap-bi-versus-sap-bw-what146s-in-a-name
Re: How to identify Header, Item and Schedule item level data sources?
For Transformations in BI:
http://help.sap.com/saphelp_nw70/helpdata/en/33/045741c0c28447e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/497f42d540d665e10000000a155106/frameset.htm
For DTP:
DTP:
http://help.sap.com/saphelp_nw70/helpdata/en/20/a894ed07e75648ba5cf7c876430589/frameset.htm
For DSO:
Data Store Objects:
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Reg
Pra -
What is the difference between ojvm and client versions?
Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE 9.0.3.10.35
UML Modelers Version 9.0.3.9.4
Business Components Version 9.0.3.10.7
java.version 1.3.1_02
java.vm.name OJVM Client VM
java.vm.version 9.0.3.738 oHowever, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.
-
What is the difference between TO_CHAR and TO_DATE()?
Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
'2','02', '3','03', '4','04', '5','05',
'6','06', '7','07', '8','08', '9','09',
'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
DECODE(TO_CHAR(SYSDATE, 'MM'),
'01', '1',
'02', '2',
'03', '3',
'04', '4',
'05', '5',
'06', '6',
'07', '7',
'08', '8',
'09', '9',
'10', 'A',
'11', 'B',
'12', 'C') as code
from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM
Maybe you are looking for
-
Ipod Touch frozen with Apple logo & loading bar below!
My laptop shutdown while my Ipod was updating software. It is frozen with the apple logo & the loading bar below. When I turned my laptop back on, it will not recognize my Ipod. This means I cannot even try restoring it. I have unplugged & plugged ba
-
followed bt instructions 2 open nat type and it still hasnt worked.any ideas
-
I'm trying to burn a Magic DVD in iDVD and I keep getting a message stating that there is not enough free disc space for encoding the remaining assets. How do I resolve this?
-
Limited access database user in applications
We need to create one user in the applications database who should have access to all the tables except those belonging to HRMS. We need this user restricted from being able to see the HR data. Is there any way we can achieve this. please help.
-
Reported phone & internet down 9th Dec. Told would be looked 12th Dec this never happened was then told 15th Dec this never happened now told 22nd Dec . Time to look at my contract