What is the difference between workbench request and customizing request

hi gurus
can anyone suggest me
what is the difference between
workbench request and
customizing request
abaper ll work on which request
thank you
regards
kals.

A quick search in the forum would have taken you to this answer
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Similar Messages

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

What is the difference between pick order and TO ?

Hello Gurus,
What is the difference between pick order and TO ? Can anybody throw some light on this?
Any document ..any link please share.
Helpful answers Dont offer any rewards
Thanks,
Nilesh
Edited by: Lakshmipathi on Dec 15, 2010 8:35 PM

Hello Nilesh,
Do you want the forum experts to do the search for you?
Please search the forum before creating a new thread...
Please refer here:
difference between picking request and transfer order
Hope this clarifies...
Thanks,
Jignesh Mehta

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the differences between ECC5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Dear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi.

What is the difference between document class and normal class

Hi,
Please let me know what is the difference between document class and normal class.
And I have no idea which class should call as document class or call as an object.
Thanks
-Actionscript Developer

the document class is invoked immediately when your swf opens. the document class must subclass the sprite or movieclip class.
all other classes are invoked explicitly with code and need not subclass any other class.

In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
Thanks

Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
If you are a developer, you can do that with a command you can type into Terminal:
sudo purge

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

What is the difference between Business System and Business Service?

Hi
Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
Best Regards
Ravi Shankar B

HI,
Business system:
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service:
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Regards,
Sudheer.

What is the Difference between AQ adpater and JMS adapter??

What is the Difference between AQ adpater and JMS adapter in BPEL11g??
In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

Go for AQ when using Oracle Advanced Queueing (the database stuff).
Use JMS when using JMS (in memory of file queues)
hth,
Peter Paul

What is the difference between workbench request and customizing request

Similar Messages

Maybe you are looking for